S. Eckert

Functional characterization of 3D-DDTC detectors fabricated at FBK-irst

We present selected results from the functional characterization of 3D-Double-Sided Double-Type Column (3D-DDTC) detectors fabricated at FBK, Trento. This technology features columnar electrodes etched perpendicularly to wafer surface and not passing all the way through the wafer thickness, stopping at short distance from the opposite surface. The detectors under investigation come from the first batch of these devices, made on n-type substrates. We report on the performances of microstrip sensors before and after irradiation up to 2×1015cm−2 fluences. The characterization has been carried out using a micrometer position resolved infrared laser scan and a 90Sr Beta source setup.

Short strips for the SLHC: A P-Type Silicon microstrip detector in 3D-technology

The luminosity upgrade of the Large Hadron Collider (LHC), the sLHC, will constitute an extremely challenging radiation environment for tracking detectors. With respect to the LHC, massive improvements in radiation hardness are required. In this paper we investigate the superior radiation hardness of the 3D-design, where rows of 3D-columns are etched in substrate material and joined together to form strips. To demonstrate the feasibility of 3D silicon strip detectors (SSDs) for the sLHC, we have built prototype modules using 3D single type column (3D-STC) strip detectors with short strips and front-end electronics from the present ATLAS SemiConductor Tracker (SCT). The modules were tested with a beta source setup before and after irradiation to sLHC fluences with 26 MeV protons. We report on the performance of these 3D-modules, compare it to the results prior to irradiation, and draw conclusions about options for using 3D SSDs for tracking at the sLHC.

Short Strips for the sLHC: A P-Type Silicon Microstrip Detector in 3-D Technology

The luminosity upgrade of the Large Hadron Collider (LHC), the sLHC, will constitute an extremely challenging radiation environment for tracking detectors. With respect to the LHC, large improvements in radiation hardness are required. In this paper, we investigated the expected radiation hardness of the 3-D-design, where rows of 3-D-columns are etched in substrate material and joined together to form strips. To investigate the feasibility of 3-D silicon strip detectors (SSD) for the sLHC, we have built prototype modules using 3-D single type column (3-D-STC) strip detectors with short strips and front-end electronics from the present ATLAS SemiConductor Tracker (SCT). The modules were tested with a beta source setup before and after irradiation to sLHC fluences with 26 MeV protons. We report on the performance of these 3-D-modules, compare it to the results prior to irradiation, and draw conclusions about options for using 3-D SSD detectors for tracking at the sLHC.

First Beam Test Characterisation of a 3D-stc Silicon Short Strip Detector

The planned upgrade to the CERN Large Hadron Collider (LHC), the Super-LHC (sLHC) will increase its luminosity by a factor of ten. This necessitates the development of silicon tracking detectors that are significantly more radiation resistant than the ones employed at the LHC. Currently, new detector technologies are being developed to cope with the increased levels of radiation damage at the sLHC. A possible radiation hard option for silicon short strip devices (SSD) in the inner layers of sLHC trackers are 3-D detectors with rows of columnar electrodes processed into the bulk material. These are joined together to form strips. While the excellent radiation hardness of this design has been proven before in lab experiments, a 3-D SSD prototype has now been investigated for the first time in a beam test with pions of a nominal energy of 180 GeV. The use of analog LHC-speed electronics, a beam telescope and time-resolved measurements allowed for detailed studies of the signal behavior on the hit strip and its neighboring strips. Charge collection and efficiency were as well measured with respect to time and point of incidence of the beam particles on the detector. The results of these measurements are presented in this paper.

Development of 3D detectors at FBK-irst

We report on the development of 3D detectors at Fondazione Bruno Kessler - irst in the framework of the CERN RD-50 Collaboration. Technological and design aspects dealing with the 3D Single Type Column detectors are reviewed, and selected results from the electrical and functional characterization of prototypes are reported and discussed. A new detector concept, namely 3D Double-side Double Type Column detectors, allowing for significant performance enhancement while maintaining a reasonable process complexity, is final ly addressed.

Search for the Higgs Boson in the H{yields}WW{yields}l{nu}jj Decay Channel in pp Collisions at {radical}(s)=7 TeV with the ATLAS Detector

A search for a Higgs boson has been performed in the H→WW→ℓνjj channel in 1.04 fb(-1) of pp collision data at √s=7 TeV recorded with the ATLAS detector at the Large Hadron Collider. No significant excess of events is observed over the expected background and limits on the Higgs boson production cross section are derived for a Higgs boson mass in the range 240 GeV<m(H)<600 GeV. The best sensitivity is reached for m(H)=400 GeV, where the 95% confidence level upper bound on the cross section for H→WW production is 3.1 pb, or 2.7 times the standard model prediction.

Study of jet shapes in inclusive jet production in pp collisions at {radical}(s)=7 TeV using the ATLAS detector

Jet shapes have been measured in inclusive jet production in proton-proton collisions at sqrt(s) = 7 TeV using 3 pb^{-1} of data recorded by the ATLAS experiment at the LHC. Jets are reconstructed using the anti-kt algorithm with transverse momentum 30 GeV < pT < 600 GeV and rapidity in the region |y| < 2.8. The data are corrected for detector effects and compared to several leading-order QCD matrix elements plus parton shower Monte Carlo predictions, including different sets of parameters tuned to model fragmentation processes and underlying event contributions in the final state. The measured jets become narrower with increasing jet transverse momentum and the jet shapes present a moderate jet rapidity dependence. Within QCD, the data test a variety of perturbative and non-perturbative effects. In particular, the data show sensitivity to the details of the parton shower, fragmentation, and underlying event models in the Monte Carlo generators. For an appropriate choice of the parameters used in these models, the data are well described.

Measurement of the inclusive isolated prompt photon cross section in pp collisions at {radical}(s)=7 TeV with the ATLAS detector

A measurement of the cross section for the inclusive production of isolated prompt photons in pp collisions at a center-of-mass energy root s = 7 TeV is presented. The measurement covers the pseudorapidity ranges vertical bar eta(gamma)vertical bar < 1: 37 and 1: 52 <= vertical bar eta(gamma)vertical bar < 1: 81 in the transverse energy range 15 <= E-T(gamma) < 100 GeV. The results are based on an integrated luminosity of 880 nb(-1), collected with the ATLAS detector at the Large Hadron Collider. Photon candidates are identified by combining information from the calorimeters and from the inner tracker. Residual background in the selected sample is estimated from data based on the observed distribution of the transverse isolation energy in a narrow cone around the photon candidate. The results are compared to predictions from next-to-leading-order perturbative QCD calculations.A measurement of the cross section for the inclusive production of isolated prompt photons in pp collisions at a center-of-mass energy √s=7TeV is presented. The measurement covers the pseudorapidity ranges |ηγ|<1. 37 and 1.52≤|ηγ|<1.81 in the transverse energy range 15≤ETγ<100GeV. The results are based on an integrated luminosity of 880nb-1, collected with the ATLAS detector at the Large Hadron Collider. Photon candidates are identified by combining information from the calorimeters and from the inner tracker. Residual background in the selected sample is estimated from data based on the observed distribution of the transverse isolation energy in a narrow cone around the photon candidate. The results are compared to predictions from next-to-leading-order perturbative QCD calculations.

Measurements of 3D Silicon Strip Sensors by two Manufacturers

The increase of the radiation dose at the luminosity upgrade of the LHC (sLHC) necessitates the development of novel tracking detectors. Among these, 3D silicon detectors constitute a promising option. By etching columnar electrodes of both doping types into the sensor, the distance for depletion and charge collection is decoupled from the sensor thickness and can be considerably smaller than in standard planar sensors. Two of the main effects of radiation damage in silicon detectors (increasing depletion voltage and trapping) can be significantly reduced. Silicon strip detectors in 3D-DDTC (double-sided, double type column) design produced by FBKIRST (Trento, Italy) and CNM-IMB (Barcelona, Spain) have been measured in a test beam at the CERN SPS. Important properties like spatially resolved charge collection and detection efficiency were investigated.

Observation of a Centrality-Dependent Dijet Asymmetry in Lead-Lead Collisions at {radical}(s{sub NN})=2.76 TeV with the ATLAS Detector at the LHC

By using the ATLAS detector, observations have been made of a centrality-dependent dijet asymmetry in the collisions of lead ions at the Large Hadron Collider. In a sample of lead-lead events with a per-nucleon center of mass energy of 2.76 TeV, selected with a minimum bias trigger, jets are reconstructed in fine-grained, longitudinally segmented electromagnetic and hadronic calorimeters. The transverse energies of dijets in opposite hemispheres are observed to become systematically more unbalanced with increasing event centrality leading to a large number of events which contain highly asymmetric dijets. This is the first observation of an enhancement of events with such large dijet asymmetries, not observed in proton-proton collisions, which may point to an interpretation in terms of strong jet energy loss in a hot, dense medium.