S. Facca

Experience of using the bioresorbable copolyester poly(DL-lactide-ε-caprolactone) nerve conduit guide Neurolac™ for nerve repair in peripheral nerve defects: report on a series of 28 lesions.

Synthetic nerve guides are occasionally used to repair nerve defects. The aim of the present work was to analyse the results of Neurolac™ use in a series of 23 patients. We operated on 28 nerve lesions located on various sites: arm (n = 1), elbow (n = 5), forearm (n = 4), wrist (n = 2), palm (n = 5), fingers (n = 11). Defects averaged 11.03 mm and were repaired using Neurolac™. After an average of 21.9 months’ follow up (3–45 months), subjective criteria (pain, cold intolerance, Quick DASH) and objective criteria (strength, Weber and Semmes–Weinstein sensitivity tests) were compared with the contralateral side. Average pain score was 2.17/10. Cold intolerance was reported in fifteen cases. Quick DASH averaged 35.37/100. Grip strength averaged 64.62% of the contralateral side. As regards sensitivity, the difference between the two sides was 18.89 on Weber’s test, and 46.92 on Semmes–Weinstein. Defect size did not affect the outcomes. We observed eight complications the most serious being two fistulizations of the Neurolac™ device close to a joint and one neuroma. Neurolac™ presents some advantages (resorption, semi-permeability, emergency use, tenseless repair) like other synthetic guides used for nerve regeneration and its transparency constitutes an added benefit. However, some difficulty in its handling and its expensiveness represent real disadvantages. Our results are not in favour of its use in repairing hand nerve defects.

Arthroscopic interposition arthroplasty of the trapeziometacarpal joint

PURPOSE In carpometacarpal (CMC) arthritis of the thumb, the use of interposition techniques (polylactic acid, pyrocarbon, dacron) has been increasing recently. These techniques are most often combined with open or arthroscopic complete or partial trapeziectomy. This article reports the results at one year of the arthroscopic interposition of an absorbable implant performed without trapeziectomy. METHODS Our series included 25 patients aged 60.5 years on average, presenting with osteoarthritis of the trapeziometacarpal joint that had been medically treated for 18.5 months on average. All patients were operated using 1-ulnar (U) and 1-radial (R) portals. After joint debridement, a polylactic acid implant was inserted under arthroscopic control. Outcome evaluation consisted of the assessment of pain intensity, grip strength, pinch strength, opposition, thumb abduction and Dell radiological staging. RESULTS The average follow-up was 14 months. Postoperative radiological data showed significant differences from baseline clinical data regarding all evaluated variables: 0.68 vs. 3.5 for pain, 24.76 Kg vs. 16.64 Kg for grip strength, 6.44 Kg vs. 3.64 Kg for pinch strength, 8.6 vs. 7.28 for opposition, 81.2° vs. 69.6° for thumb abduction, and 1.08 vs. 2.88 on the Dell stage. Eleven complications occurred, including a type 1 complex regional pain syndrome, one sepsis, and nine inflammatory reactions that resolved after an average of 3 weeks. CONCLUSIONS Our technique is simple, rapid, cost-effective, and does not necessitate trapeziectomy, even partial. It has the same indications as other non-radical interventions. The follow-up duration of our study was too short for long-term evaluation but short-term outcome appeared superior to that in other published series. The regional inflammatory reactions that occurred in our series were transient and probably related to implant resorption. Our promising results suggest extending the indication of arthroscopic interposition to more advanced stages of proximal joint osteoarthritis.

Distal Radius Isoelastic Resurfacing Prosthesis: A Preliminary Report.

Background Here we present a preliminary case series of unicompartmental isoelastic resurfacing prosthesis of the distal radius to treat comminuted articular fractures of osteoporotic elderly patients. Materials and Methods Our study included 12 patients, mean age 76 years, who presented with comminuted osteoporotic distal radius fracture. Because of the severity of injury and poor bone quality; osteosynthesis was not deemed to be a good option. Description of Technique The surgery was performed through a dorsal approach. The subchondral bone of the entire distal radial articular was excised and a unicompartmental prosthesis was applied. Results At an average follow-up of 32 months, the pain was 2.8/10, Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) 37.4/100, grip strength in neutral 49.9%, in supination 59.0%, and in pronation 56.2% of the contralateral normal side. The wrist ranges of motion in flexion and extension were 56.1% and 79.3%, in supination and pronation 87.7% and 91.0% of the contralateral normal side. Two patients experienced a complex regional pain syndrome (CRPS) type II; these resolved spontaneously. One patient experienced distal radioulnar joint (DRUJ) stiffness, which improved after an ulna head resection. Finally, one patient required revision surgery after a secondary traumatic fracture. Radiographically; the average volar tilt was 9.8°; the average of radial inclination was 11.6°. Conclusion The concept of a unicompartmental isoelastic resurfacing prosthesis offers a promising option for the treatment of comminuted, osteoporotic distal radius articular fractures of elderly patients. Level of Evidence IV.

Fractures and dislocation of the base of the thumb metacarpal

Acute traumatic lesions of the base of the first metacarpal are frequent and their consequences can affect the opposition of the thumb. They usually occur after trauma in compression along the axis of the thumb in flexion. Restoring the anatomy and biomechanics of the trapeziometacarpal joint is essential when treating these injuries, hence why surgical treatment is usually indicated. We distinguish trapeziometacarpal dislocations, small-fragment and large-fragment Bennett’s fractures, articular three-fragment Rolando and comminutive fractures and extra-articular fractures of the base of the first metacarpal. All carry the risk of narrowing of the first web. Recent studies have described poor results with conservative treatment. Surgical techniques are varied: percutaneous surgery, open surgery and arthroscopic surgery. The techniques of osteosynthesis are various: locking plates, and direct or indirect screw fixation or pinning. The prognosis depends on the quality of the restoration of the mobility of the trapeziometacarpal joint. Level of evidence: 4

Feasibility of an endoscopic approach to the axillary nerve and the nerve to the long head of the triceps brachii with the help of the Da Vinci Robot.

Surgery to transfer the axillary nerve and the nerve of the long head of the triceps presents two obstacles: 1) the access portals are not standardized and 2) the nerves are for their larger part approached through large incisions. The goal of this study was to explore the feasibility of an endoscopic microsurgical approach. The posterior aspect of a cadaver shoulder was approached through three communicating mini-incisions. The Da Vinci robot camera was installed on a central trocart, and the instrument arms on the adjacent trocarts. A gas insufflation distended the soft tissues up to the lateral axillary space. The branches of the axillary nerve and the nerve to the long head of the triceps brachii muscle were identified. The dissection of the axillary nerve trunk and its branches was easy. The posterior humeral circumflex veins and artery were dissected as well without any difficulty. Finding the nerve to the long head of the triceps brachii was found to be more challenging because of its deeper location. Robots properties allow performing conventional microsurgery: elimination of the physiologic tremor and multiplication of the movements. They also facilitate the endoscopic approach of the peripheral nerves, as seen in our results on the terminal branches of the axillary nerve and the nerve to the long head of the triceps brachii.

Prospective continuous study comparing intrafocal cross-pinning HK2® with a locking plate in distal radius fracture fixation

The fixation of distal radius fractures by pinning or locking plates remains controversial. The aim of this prospective continuous study was to compare the results of 28 anterior locking plates with 23 intrafocal cross-pinning HK2(®) systems. The mean age of group I (SVP(®), SBI™ plate) was 61 years. There were 15 extra-articular and 13 articular fractures. The mean age of group II (HK2(®), Arex™) was 63 years, with 13 extra-articular and 10 articular fractures. Twelve clinical variables were measured: pain, wrist strength, supination strength, pronation strength, quick DASH score, range of wrist motion in flexion, extension, pronation, and supination, ulnar variance, radial slope, and radial volar tilt. At 40 weeks follow-up, there was no difference between the two groups for 10 variables; two variables showed differences between the two groups: mean quick DASH score was 10.7 for group I, 19.7 for group II, and mean ulnar variance was -0.95 mm for group I, and 1.16 mm for group II. Six transient complications were noted for group I: five tenosynovitis, and one carpal tunnel syndrome. We noted 12 complications in group II: four superficial infections, two secondary displacements, one pin migration, two CRPS type II, two tendon ruptures and one nerve irritation. Generally, plates provided a more stable fixation associated with less complications while the HK2(®) system was quicker and less costly. The indications for its use need to be refined with a larger series and longer follow-up.

Canaletto implant in revision surgery for carpal tunnel syndrome: 21 case series

Revision carpal tunnel surgery varies from 0.3% to 19%. It involves a delayed neurolysis and prevention of perineural fibrosis. Despite numerous available procedures, the results remain mediocre. The aim of this study is to evaluate the results of the Canaletto implant in this indication. Our series includes 20 patients (1 bilateral affection) reoperated for carpal tunnel between October 2008 and December 2009. After the first operation, the symptom-free period was 112 weeks, on average. The average incision was 27 mm. After neurolysis, the Canaletto implant was placed in contact with the nerve. Immediate postoperative mobilization was commenced. Sensory (pain, DN4, and hypoesthesia), motor (Jamar, muscle wasting), and functional (disabilities of the arm, should, and hand; DASH) criteria were evaluated. Nerve conduction velocity (NCV) of the median nerve was measured. Average follow up was 12.1 months. All measurements were improved after insertion of the Canaletto implant: pain (6.45–3.68), DN4 (4.29–3.48), Quick DASH (55.30–34.96), Jamar (66.11–84.76), NCV (29.79–39.06 m/s), hypoesthesia (76.2–23.8%), wasting (42.9–23.8%). Nevertheless, four patients did not improve, and pain was the same or worse in six cases. Our results show that in recurrent carpal tunnel syndrome, Canaletto implant insertion gives results at least as good as other techniques, with the added advantage of a smaller access incision, a rapid, less invasive technique, and the eliminated morbidity of raising a flap to cover the median nerve.

Locking plates for fixation of extra-articular fractures of the first metacarpal base: A series of 15 cases

Extra-articular fractures of the first metacarpal base may lead to retraction of the first web and weakness of the pinch. Conventional surgery (K-wire or non-locking plates) needs six weeks of immobilization. Our goal was to achieve the reduction of such fractures using locking mini-plates to allow early mobilization. Our series included 15 patients, with an average age of 35 years, operated on for an extra-articular fracture of the first metacarpal base. All patients underwent surgery with variable angle locking mini-plates. In 10 patients, we used a double-row plate and for the other five patients T-shaped plates. Fractures were immobilized for two weeks. Outcome evaluation consisted in the assessment of subjective criteria (pain, quick-DASH), objective criteria (Kapandji score, Jamar®, pinch®), screening for complications, time off work and radiological consolidation. Follow-up time was 10 months. Pain averaged 2.2/10 and quick-DASH 17.4. Kapandji score was 90%, grip strength 95.5% and pinch strength 88.6% of the contralateral hand. Three secondary displacements occurred with T-plates. Mean time off work was seven weeks. Radiological consolidation was detected at four to six weeks. Our results seem to indicate that locking T-plates do not provide sufficient strength to allow early mobilization. The direct cost of locking plates is high but this must be weighed against the reduced indirect costs when calculating the cost effectiveness of this type of management. Double-row locking plates offer a valuable therapeutic alternative since they allow stable fixation and early mobilization of the thumb, which may outweigh their high cost.

Review of Acute Traumatic Closed Mallet Finger Injuries in Adults

In adults, mallet finger is a traumatic zone I lesion of the extensor tendon with either tendon rupture or bony avulsion at the base of the distal phalanx. High-energy mechanisms of injury generally occur in young men, whereas lower energy mechanisms are observed in elderly women. The mechanism of injury is an axial load applied to a straight digit tip, which is then followed by passive extreme distal interphalangeal joint (DIPJ) hyperextension or hyperflexion. Mallet finger is diagnosed clinically, but an X-ray should always be performed. Tubianas classification takes into account the size of the bony articular fragment and DIPJ subluxation. We propose to stage subluxated fractures as stage III if the subluxation is reducible with a splint and as stage IV if not. Left untreated, mallet finger becomes chronic and leads to a swan-neck deformity and DIPJ osteoarthritis. The goal of treatment is to restore active DIPJ extension. The results of a six- to eight-week conservative course of treatment with a DIPJ splint in slight hyperextension for tendon lesions or straight for bony avulsions depends on patient compliance. Surgical treatments vary in terms of the approach, the reduction technique, and the means of fixation. The risks involved are stiffness, septic arthritis, and osteoarthritis. Given the lack of consensus regarding indications for treatment, we propose to treat all cases of mallet finger with a dorsal glued splint except for stage IV mallet finger, which we treat with extra-articular pinning.

Minimally invasive osteotomy for distal radius malunion: A preliminary series of 9 cases.

UNLABELLED The rate of malunion after distal radius fractures is 25% after conservative treatment and 10% after surgery. Their main functional repercussion related to ulno-carpal conflict is loss of wrist motion. We report a retrospective clinical series of minimally invasive osteotomies. The series consisted of 9 cases of minimally invasive osteotomies with volar locking plate fixation. All osteotomies healed. The average pain was 5.3/10 preoperatively and 2.1/10 at last follow-up. The mean Quick DASH was 55.4/100 preoperatively and 24.24/100 at last follow-up. Compared to the opposite side, the average wrist flexion was 84.11%, the average wrist extension was 80.24%, the average pronation was 95.33% and the average supination was 93.9%. With similar results to those of the literature, our short series confirms the feasibility of minimally invasive osteotomy of the distal radius for extra-articular malunion. TYPE: Case-series. LEVEL OF EVIDENCE IV.