S.G. Yakovlev

Cell attachment on poly(3-hydroxybutyrate)-poly (ethylene glycol) copolymer produced by Azotobacter chroococcum 7B

BackgroundThe improvement of biomedical properties, e.g. biocompatibility, of poly(3-hydroxyalkanoates) (PHAs) by copolymerization is a promising trend in bioengineering. We used strain Azotobacter chroococcum 7B, an effective producer of PHAs, for biosynthesis of not only poly(3-hydroxybutyrate) (PHB) and its main copolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV), but also alternative copolymer, poly(3-hydroxybutyrate)-poly(ethylene glycol) (PHB-PEG).ResultsIn biosynthesis we used sucrose as the primary carbon source and valeric acid or poly(ethylene glycol) 300 (PEG 300) as additional carbon sources. The chemical structure of PHB-PEG and PHB-HV was confirmed by 1H nuclear-magnetic resonance (1H NMR) analysis. The physico-chemical properties (molecular weight, crystallinity, hydrophilicity, surface energy) and surface morphology of films from PHB copolymers were studied. To study copolymers biocompatibility in vitro the protein adsorption and COS-1 fibroblasts growth on biopolymer films by XTT assay were analyzed. Both copolymers had changed physico-chemical properties compared to PHB homopolymer: PHB-HV and PHB-PEG had less crystallinity than PHB; PHB-HV was more hydrophobic than PHB in contrast to PHB-PEG appeared to have greater hydrophilicity than PHB; whereas the morphology of polymer films did not differ significantly. The protein adsorption to PHB-PEG was greater and more uniform than to PHB and PHB-PEG copolymer promoted better growth of COS-1 fibroblasts compared with PHB homopolymer.ConclusionsThus, despite low EG-monomers content in bacterial origin PHB-PEG copolymer, this polymer demonstrated significant improvement in biocompatibility in contrast to PHB and PHB-HV copolymers, which may be coupled with increased protein adsorption and hydrophilicity of PEG-containing copolymer.

The Terpolymer Produced by Azotobacter Chroococcum 7B: Effect of Surface Properties on Cell Attachment

The copolymerization of poly(3-hydroxybutyrate) (PHB) is a promising trend in bioengineering to improve biomedical properties, e.g. biocompatibility, of this biodegradable polymer. We used strain Azotobacter chroococcum 7B, an effective producer of PHB, for biosynthesis of not only homopolymer and its main copolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV), but also novel terpolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-poly(ethylene glycol) (PHB-HV-PEG), using sucrose as the primary carbon source and valeric acid and poly(ethylene glycol) 300 (PEG 300) as additional carbon sources. The chemical structure of PHB-HV-PEG was confirmed by 1H nuclear-magnetic resonance analysis. The physico-chemical properties (molecular weight, crystallinity, hydrophilicity, surface energy) of produced biopolymer, the protein adsorption to the terpolymer, and cell growth on biopolymer films were studied. Despite of low EG-monomers content in bacterial-origin PHB-HV-PEG polymer, the terpolymer demonstrated significant improvement in biocompatibility in vitro in contrast to PHB and PHB-HV polymers, which may be coupled with increased protein adsorption, hydrophilicity and surface roughness of PEG-containing copolymer.

Sustained release of the antitumor drug paclitaxel from poly(3-hydroxybutyrate)-based microspheres

The development of sustained release formulations based on biodegradable polymers is a promising trend in modern pharmacology. Polyhydroxyalkanoates (PHA) attract increasing attention due to their biodegradability and high biocompatibility, which make them suitable for the development of novel drug dosage forms. We have produced poly(3-hydroxybutyrate) (PHB)-based microspheres loaded with the antitumor drug paclitaxel and investigated morphology, drug release kinetics and the effect of these microspheres on tumor cells in vitro. The data on the kinetics of drug release, biocompatibility and biological activity of the biopolymer microspheres in vitro have demonstrated that the studied system of prolonged drug release had lower toxicity and higher efficiency compared to the traditional dosage forms of paclitaxel.

Preclinical Toxicity Evaluation of Paclitaxel Biopolymer Formulation

BACKGROUND Poly(hydroxyalkanoates) (PHA) have recently attracted increasing attention due to their biodegradability and high biocompatibility, which makes them suitable for the development of new prolong drug formulations. OBJECTIVE A preclinical toxicology study of paclitaxel biopolymer formulation (PBF) (paclitaxel-loaded poly(3- hydroxybutyrate) (PHB) microparticles) was done in order to assess its safety and to forecast side and toxic effects in a clinical study on patients. METHOD PHB microparticles loaded with antitumor cytostatic drug PTX were obtained by spray-drying method using Nano Spray Dryer B-90. The comprehensive study of cytotoxicity (on bone marrow stem cells), acute and chronic toxicity, allergenic and pyrogenic properties, histological investigation (in mice, rats and rabbits) of obtained PBF was carried out. RESULTS The acute toxicity study showed that PBF is much less toxic in equivalent PTX-content doses than PTX in conventional formulation when administered intraperitoneally to mice and rats. However, the chronic toxicity study showed that at intraperitoneal administration PBF has distinct cumulative properties and toxic effects that prevent PBF from clinical testing in current composition. CONCLUSION Thus, the PBF as a prolong drug needs to correct its parameters for further drug formulation development.

Prolonged release of chlorambucil and etoposide from poly-3-oxybutyrate-based microspheres

Microspheres were obtained on the basis of poly(3-oxibutyrate) (POB) with the inclusion of the Chlorambucil and Etoposide cytostatic drugs in a polymer matrix, and the morphology, kinetics of drug release from microspheres, and the interaction between microspheres and tumor cells in vitro were studied. Data on the kinetics of drug release suggests that a prolonged release occurs by drug diffusion from the polymer matrix at the initial stage and at the expense of hydrolytic degradation of the polymer at a later stage. A study of the biocompatibility and biological activity of biopolymeric microspheres showed that chlorambucil operates actively and strongly inhibits the growth of cultured cells for a short time (24 h). Etoposide acts weaker (the percentage of cell growth suppression during 48 h does not exceed 50%), but subsequently it has a basis for the creation of new dosage forms with prolonged action of Etoposide and chlorambucil for cancer therapy.

New poly(3-hydroxybutyrate) microparticles with paclitaxel sustained release for intraperitoneal administration.

BACKGROUND Poly(hydroxyalkanoates) (PHA) have recently attracted increasing attention due to their biodegradability and high biocompatibility, which makes them suitable for the development of new prolong drug formulations. OBJECTIVE This study was conducted to develop new prolong paclitaxel (PTX) formulation based on poly(3- hydroxybutyrate) (PHB) microparticles. METHOD PHB microparticles loaded with antitumor cytostatic drug PTX were obtained by spray-drying method using Nano Spray Dryer B-90. The PTX release kinetics in vitro from PHB microparticles and their cytotoxity on murine hepatoma cell line MH-22a were studied. Microparticles antitumor activity in vivo was studied using intraperitoneally (i.p.) transplanted tumor models: murine Lewis lung carcinoma and xenografts of human breast cancer RMG1. RESULTS Uniform PTX release from PHB-microparticles during 2 months was observed. PTX-loaded PHB microparticles have demonstrated a significant antitumor activity versus pure drug both in vitro in murine hepatoma cells and in vivo when administered i.p. to mice with murine Lewis lung carcinoma and xenografts of human breast cancer RMG1. CONCLUSION The developed technique of PTX sustained delivery from PHB-microparticles has therapeutic potential as prolong anticancer drug formulation.

Low molecular weight poly(3-hydroxybutyrate) microparticles synthesized by piezoelectric spray drying for the sustained release of paclitaxel

Biocompatible and biodegradable polymer microparticles are contemporary medicines able to eliminate the side effects and unsatisfactory pharmacokinetics of already existing preparations. In this work we have developed a high-tech scalable method for the synthesis of paclitaxel-loaded poly(3-hydroxybutyrate) (PHB)-based microparticles. These particles were synthesized on a B-90 Buchi nano spray dryer by piezoelectric spray drying in an inert atmosphere. A regular spherical shape, narrow size distribution, and satisfactory results for the release of paclitaxel from the polymeric matric of microparticles in vitro make this polymeric medicinal form promising for its further application in pharmaceutics. Nanoparticles with a similar composition synthesized via the laboratory one-stage emulsification method were used for comparison. This study is the first stage in the creation of a sustained-action anticancer paclitaxel preparation.