S. Savitha

Fabrication, characterization, and application of greigite nanoparticles for cancer hyperthermia

Greigite is a Fe-S-containing complex having magnetic properties mainly synthesized in the solution. In the present study, greigite was synthesized by a coprecipitation method at different pHs and reaction times. The greigite phase was analyzed by the X-ray diffraction (XRD) method at an optimum pH of 3.0 and reaction time of 10 min, respectively. The magnetization characterization by superconducting quantum interference device (SQUID) revealed that the magnetic saturation was obtained at 16.1538 (emu/g). The inductive heating property of the greigite nanoparticles was carried out by induction heater power cube (IHPC) in an alternating current magnetic field and the results indicated that the heating effect was significant. Transmission electron microscopy (TEM) revealed that the size of the greigite was around 50-100 nm and the edges of nanoparticles have no clear boundary or distinctive morphology. Studies on LDH and WST-I assay revealed low cytotoxicity at greigite concentrations of 1 mg/ml. In vitro experiments suggested that cancerous cells, human lung adenocarcinoma epithelial cell line (A549), had the ability to become more damaged under AC magnetic field than the normal human lung cells (HFL-1).

Anti‐inflammatory effects of hydrophilic and lipophilic statins with hyaluronic acid against LPS‐induced inflammation in porcine articular chondrocytes

The objective of the study is to understand the therapeutic effects of lipophilic (simvastatin) and hydrophilic statins (pravastatin) combined with/without hyaluronic acid for osteoarthritis by an in vitro LPS‐induced inflammatory model of articular chondrocytes. HA in combination with different doses of simvastatin or pravastatin were used. Beside cytotoxicity, the influence of statins on NO production, pro‐inflammatory cytokine, inflammatory mediators, and NF‐κB p50 protein were analyzed. Finally, TUNEL assay was performed to detect DNA strand breakage. Two statins were less able to lower NF‐κB activity when they were administrated along without HA. The gene expression demonstrates that simvastatin and pravastatin had the ability to decrease pro‐inflammatory and inflammatory mediator levels. High dose simvastatin with or without HA down regulated inflammatory cytokines, but resulted in higher cytotoxicity. TUNEL assay confirms the regulatory effect of statins with or without HA over the apoptosis of chondrocytes, especially in hydrophilic statins. The significant down‐regulation of inflammatory mediators suggests that intra‐articular injection of HA in combination with statins might feasibly slow the progress of osteoarthritis. Administration of simvastatin or pravastatin with hyaluronic acid may produce beneficial effects for OA treatment, but with better results when hydrophilic statin was used.

Regeneration and molecular characterization of an intergeneric hybrid between Graphium putredinis and Trichoderma harzianum by protoplasmic fusion

The fungal strains Graphium putredinis and Trichoderma harzianum were selected as parents for fusant development. Protoplasts were isolated using the combination of lysing enzymes Novozym 234 and cellulase with 0.6M KCl as osmotic stabilizer. The optimum conditions for release of viable protoplasts from the fungal mycelium viz. age of the mycelium, lytic enzymes, osmotic stabilizers, pH, incubation period and regeneration medium were determined. Intergeneric protoplast fusion was carried out using 50% polyethylene glycol with calcium chloride (CaCl(2)) and glycine buffer and the conditions for effective protoplast fusion, viz. fusogen, osmotic stabilizer, pH, incubation period and regeneration medium were optimized. At optimum conditions, the regeneration frequency of the fused protoplasts on potato dextrose agar (PDA) medium and fusion frequency were calculated. The regeneration frequency on non-selective (PDA) and selective media (PDA amended with starch) was determined for the parental and fusant strains in which, fusant showed a higher rate of regeneration. Fusant formation was confirmed by morphological markers (colony morphology and spore size and shape) and genetical markers like, mycelial protein pattern, restriction digestion pattern and random amplified polymorphic DNA (RAPD) analysis. The efficiency of these parental strains and their intergeneric fusant in the production of hydrolytic enzymes - amylases (treatment plant for sago factory effluent), cellulases (bioethanol), xylanases (bleaching agents for waste paper pulp) and proteases (additives in commercial detergents) - have probable applications in various industrial processes.

Modification of paper properties by the pretreatment of wastepaper pulp with Graphium putredinis, Trichoderma harzianum and fusant xylanases

Graphiumputredinis, Trichodermaharzianum and fusant were used in the present study to produce extracellular xylanases, an important industrial enzyme used in pulp and paper industry produced in a minimal medium supplemented with oat spelt xylan (1%, w/v) pH 7.0 at 27+/-2 degrees C. The enzyme was purified to homogeneity by DEAE-Cellulose and Superdex 75 FPLC column, respectively. The enzyme was found to be a monomer as determined by SDS gel electrophoresis. The optimum pH and temperature for purified G. putredinis, T. harzianum and fusant xylanases were 5.0-6.0 and 50-70 degrees C, respectively. Pretreatment of paper pulp with G. putredinis, T. harzianum and fusant xylanases decreased pulp kappa number. Xylanases particularly that of fusant at 5 IU/g pulp concentration and 1.5% pulp consistency at 60 degrees C for 18 h followed by EDED process yielded good quality paper from waste paper pulp. A significant increase in pulp brightness and improvement in various pulp properties, viz. burst capacity, thickness and bulkness of the treated pulp were observed in comparison to the conventional chemical bleaching. Easy purification and high stability of these enzymes makes it amicable for industrial applications.

Design and synthesis of elastin-like polypeptides for an ideal nerve conduit in peripheral nerve regeneration.

The study involves design and synthesis of three different elastin like polypeptide (ELP) gene monomers namely ELP1, ELP2 and ELP3 that encode for ELP proteins. The formed ELPs were assessed as an ideal nerve conduit for peripheral nerve regeneration. ELP1 was constructed with a small elongated pentapeptide carrying VPGVG sequence to mimic the natural polypeptide ELP. The ELP2 was designed by the incorporation of 4-penta peptide chains to improve the biocompatibility and mechanical strength. Thus, the third position in unique VPGVG was replaced with alanine to VPAVG and in a similar way modified to VPGKG, VPGEG and VPGIG with the substitution of lysine, glutamic acid and isoleucine. In ELP3, fibronectin C5 domain endowed with REDV sequence was introduced to improve the cell attachment. The ELP1, ELP2 and ELP3 proteins expressed by Escherichia coli were purified by inverse transition cycling (ITC). The purified ELPs were confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and western blotting. The Schwann cell (SC) morphology and cell adhesion were assessed by fabrication of ELP membrane cross-linked with glutaraledhyde. The Schwann cell proliferation was measured by WST-1 assay. Immunofluorostaining of Schwann cells was accomplished with SC specific phenotypic marker, S100.

The development of iron-free partially stabilized cement for use as dental root-end filling material

AIM To determine the effect of increasing the proportion of zinc on partially stabilized cement (PSC) produced using a one-step sol gel process. METHODOLOGY A one-step sol-gel process of Portland cement-based PSC with Zn was synthesized by replacing iron nitrate. The crystalline phases of the PSC-Zn powder were analysed by using X-ray diffraction (XRD). The experimental groups [i.e., MTA, PSC-Fe (control), PSC with 1% Zn, PSC with 3% Zn, and PSC with 5% Zn] were immersed in simulated body fluid for 3 h, 1 and 3 days to evaluate the hydration product formation. The microstructure and surface morphology were analysed using scanning electron microscopy (SEM). Initial and final setting times of the materials were determined using an ASTM Vicat needle testing machine. To evaluate the cytotoxicity of PSC-Zn system, primary osteoblasts cell lines were used. RESULTS The addition of increased weight percentages of Zn, resulted in a more unstable phase which favoured the formation of a monoclinic structure of C3 S with an increased hydration reaction of PSC and reduced setting time. The cytotoxicity testing of PSC with Zn revealed that the material was not toxic. CONCLUSIONS The newly synthesized PSC-Zn material had short setting time and was biocompatible.