S. Takada

The POLARBEAR Experiment

We present the design and characterization of the POLARBEAR experiment. POLARBEAR will measure the polarization of the cosmic microwave background (CMB) on angular scales ranging from the experiment’s 3.5’ beam size to several degrees. The experiment utilizes a unique focal plane of 1,274 antenna-coupled, polarization sensitive TES bolometers cooled to 250 milliKelvin. Employing this focal plane along with stringent control over systematic errors, POLARBEAR has the sensitivity to detect the expected small scale B-mode signal due to gravitational lensing and search for the large scale B-mode signal from inflationary gravitational waves. POLARBEAR was assembled for an engineering run in the Inyo Mountains of California in 2010 and was deployed in late 2011 to the Atacama Desert in Chile. An overview of the instrument is presented along with characterization results from observations in Chile.

LiteBIRD: a small satellite for the study of B-mode polarization and inflation from cosmic background radiation detection

LiteBIRD [Lite (Light) satellite for the studies of B-mode polarization and Inflation from cosmic background Radiation Detection] is a small satellite to map the polarization of the cosmic microwave background (CMB) radiation over the full sky at large angular scales with unprecedented precision. Cosmological inflation, which is the leading hypothesis to resolve the problems in the Big Bang theory, predicts that primordial gravitational waves were created during the inflationary era. Measurements of polarization of the CMB radiation are known as the best probe to detect the primordial gravitational waves. The LiteBIRD working group is authorized by the Japanese Steering Committee for Space Science (SCSS) and is supported by JAXA. It has more than 50 members from Japan, USA and Canada. The scientific objective of LiteBIRD is to test all the representative inflation models that satisfy single-field slow-roll conditions and lie in the large-field regime. To this end, the requirement on the precision of the tensor-to-scalar ratio, r, at LiteBIRD is equal to or less than 0.001. Our baseline design adopts an array of multi-chroic superconducting polarimeters that are read out with high multiplexing factors in the frequency domain for a compact focal plane. The required sensitivity of 1.8μKarcmin is achieved with 2000 TES bolometers at 100mK. The cryogenic system is based on the Stirling/JT technology developed for SPICA, and the continuous ADR system shares the design with future X-ray satellites.

The Simons Array: expanding POLARBEAR to three multi-chroic telescopes

The Simons Array is an expansion of the POLARBEAR cosmic microwave background (CMB) polarization experiment currently observing from the Atacama Desert in Northern Chile. This expansion will create an array of three 3.5m telescopes each coupled to a multichroic bolometric receiver. The Simons Array will have the sensitivity to produce a ≥ 5σ detection of inationary gravitational waves with a tensor-to-scalar ratio r ≥ 0:01, detect the known minimum 58 meV sum of the neutrino masses with 3σ confidence when combined with a next-generation baryon acoustic oscillation measurement, and make a lensing map of large-scale structure over the 80% of the sky available from its Chilean site. These goals require high sensitivity and the ability to extract the CMB signal from contaminating astrophysical foregrounds; these requirements are met by coupling the three high-throughput telescopes to novel multichroic lenslet-coupled pixels each measuring CMB photons in both linear polarization states over multiple spectral bands. We present the status of this instrument already under construction, and an analysis of its capabilities.

POLARBEAR-2: An instrument for CMB polarization measurements

POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision σ(r) > 0:01, and the sum of neutrino masses, Σmz, with σ(Σmv) < 90 meV. To achieve these goals, PB-2 will employ 7588 transition-edge sensor bolometers at 95 GHz and 150 GHz, which will be operated at the base temperature of 250 mK. Science observations will begin in 2017.

The Simons Array CMB polarization experiment

The Simons Array is a next generation cosmic microwave background (CMB) polarization experiment whose science target is a precision measurement of the B-mode polarization pattern produced both by inflation and by gravitational lensing. As a continuation and extension of the successful POLARBEAR experimental program, the Simons Array will consist of three cryogenic receivers each featuring multichroic bolometer arrays mounted onto separate 3.5m telescopes. The first of these, also called POLARBEAR-2A, will be the first to deploy in late 2016 and has a large diameter focal plane consisting of dual-polarization dichroic pixels sensitive at 95 GHz and 150 GHz. The POLARBEAR-2A focal plane will utilize 7,588 antenna-coupled superconducting transition edge sensor (TES) bolometers read out with SQUID amplifiers using frequency domain multiplexing techniques. The next two receivers that will make up the Simons Array will be nearly identical in overall design but will feature extended frequency capability. The combination of high sensitivity, multichroic frequency coverage and large sky area available from our mid-latitude Chilean observatory will allow Simons Array to produce high quality polarization sky maps over a wide range of angular scales and to separate out the CMB B-modes from other astrophysical sources with high fidelity. After accounting for galactic foreground separation, the Simons Array will detect the primordial gravitational wave B-mode signal to r > 0.01 with a significance of > 5σ and will constrain the sum of neutrino masses to 40 meV (1σ) when cross-correlated with galaxy surveys. We present the current status of this funded experiment, its future, and discuss its projected science return.

Variation of Film Boiling Modes in He II from Strongly to Weakly Subcooled States

Film boiling modes in both subcooled and saturated superfluid helium (He II) were experimentally investigated. The visual observation and the transient pressure and temperature measurements were performed to extract some characteristics of each boiling mode. The classification of all four film boiling modes, strongly subcooled and weakly subcooled modes in subcooled He II (He IIp) and noisy and silent film boiling modes in saturated He II (He IIs), was drawn on the boiling mode map. It was found from the heater temperature measurement that the boiling heat transfer is enhanced in the weakly subcooled mode compared with in the strongly subcooled mode. In the weakly subcooled mode, the vapor behavior is much activated by the instability in vapor-liquid interface. The boundary region between the strongly and the weakly subcooled modes becomes thick as the rise of He II temperature or the increase of the heat flux. The noisy film boiling does not occur at the pressure above 9 kPa, though it appears at the pressure above p{lambda}. It is found that in the region adjacent to the lambda line He I film boiling mode occurs even in He II.

POLARBEAR-2 optical and polarimeter designs

POLARBEAR-2 is a ground based cosmic microwave background (CMB) radiation experiment observing from Atacama, Chile. The science goals of POLARBEAR-2 are to measure the CMB polarization signals originating from the inflationary gravity-wave background and weak gravitational lensing. In order to achieve these science goals, POLARBEAR-2 employs 7588 polarization sensitive transition edge sensor bolometers at observing fre quencies of 95 and 150 GHz with 5.5 and 3.5 arcmin beam width, respectively. The telescope is the off-axis Gregorian, Huan Tran Telescope, on which the POLARBEAR-1 receiver is currently mounted. The polarimetry is based on modulation of the polarized signal using a rotating half-wave plate and the rotation of the sky. We present the developments of the optical and polarimeter designs including the cryogenically cooled refractive optics that achieve the overall 4 degrees field-of-view, the thermal filter design, the broadband anti-reflection coating, and the rotating half-wave plate.

LiteBIRD: mission overview and design tradeoffs

We present the mission design of LiteBIRD, a next generation satellite for the study of B-mode polarization and inflation from cosmic microwave background radiation (CMB) detection. The science goal of LiteBIRD is to measure the CMB polarization with the sensitivity of δr = 0:001, and this allows testing the major single-field slow-roll inflation models experimentally. The LiteBIRD instrumental design is purely driven to achieve this goal. At the earlier stage of the mission design, several key instrumental specifications, e.g. observing band, optical system, scan strategy, and orbit, need to be defined in order to process the rest of the detailed design. We have gone through the feasibility studies for these items in order to understand the tradeoffs between the requirements from the science goal and the compatibilities with a satellite bus system. We describe the overview of LiteBIRD and discuss the tradeoffs among the choices of scientific instrumental specifications and strategies. The first round of feasibility studies will be completed by the end of year 2014 to be ready for the mission definition review and the target launch date is in early 2020s.

Development and characterization of the readout system for POLARBEAR-2

POLARBEAR-2 is a next-generation receiver for precision measurements of polarization of the cosmic microwave background, scheduled to deploy in 2015. It will feature a large focal plane, cooled to 250 milliKelvin, with 7,588 polarization-sensitive antenna-coupled transition edge sensor bolometers, read-out with frequency domain multiplexing with 32 bolometers on a single SQUID amplifier. We will present results from testing and characterization of new readout components, integrating these components into a scaled-down readout system for validation of the design and technology.

Visualization study of phase transition caused by heating of He II in two-dimensional narrow channel

A visualization study was carried out by applying shadowgraph method to investigate a number of phase transitions of superfluid helium (He II) in a two-dimensional narrow channel being composed of a transparent planar heater and a cover glass plate. A liquid-vapor, a He II-He I and a superheated He II (sHe II)—superheated He I (sHe I) interfaces were clearly observed with the aid of image processing technique to enhance the resolution. It was found that the characteristic features of onset of film boiling were distinguishable under the pressure condition atmospheric pressure and saturated vapor pressure. Furthermore, the interface of sHe II- sHe I was visualized in saturated He II at the temperature above 2.1 K.