S.W. Li

Adopting ‘lift-up’ building design to improve the surrounding pedestrian-level wind environment

Abstract Modern megacities are teeming with closely-spaced tall buildings, which limit air circulation at the pedestrian level. The resultant lack of air circulation creates poorly ventilated areas with accumulated air pollutants and thermal discomfort in the summer. To improve air circulation at the pedestrian level, buildings may be designed to have a ‘lift-up’ shape, in which the main structure is supported by a central core, columns or shear walls. However, a lack of knowledge on the influence of the ‘lift-up’ design on the surrounding wind environment limits the use of ‘lift-up’ buildings. This study aims to investigate the influence of ‘lift-up’ buildings and their dimensions on the pedestrian-level wind environments using wind tunnel tests. A parametric study was undertaken by using 9 ‘lift-up’ building models with different core heights and widths. The results were compared with the surrounding wind environment of a control building with similar dimensions. The results reveal that the ‘lift-up’ core height is the most influential parameter and governs the area and magnitude of high and low wind speed zones around such buildings. Based on wind tunnel test results and a selected comfort criterion, appropriate core dimensions could be selected to have acceptable wind conditions near lift-up buildings.

A wind tunnel study of effects of twisted wind flows on the pedestrian-level wind field in an urban environment

Abstract The influence of twisted wind flows on the pedestrian-level wind (PLW) field of an urban area was evaluated by testing a typical urban site (Tsuen Wan, Hong Kong) in a boundary layer wind tunnel. Four twisted wind profiles with different magnitudes and directions of yaw angles were employed to investigate variations in wind speed with the properties of the twisted wind flows at the pedestrian level. An additional conventional wind profile with similar wind speeds and turbulence intensities to the twisted winds but with zero yaw angles was simulated for comparisons. The mean wind speeds at 77 locations including the perimeter, roadsides, and groups of high-rise buildings were analysed for the conventional and the four twisted wind flows. The comparisons show a tendency of twisted winds to generate higher wind speeds at the pedestrian level than the conventional wind profile. The wind speeds of the twisted winds have a strong dependence on the magnitude and direction of the yaw angles, particularly at locations where the densities of buildings in the neighbourhood are low and hence local wind circulations are significantly modified by the twisted winds.

Evaluation of pedestrian wind comfort near ‘lift-up’ buildings with different aspect ratios and central core modifications

Abstract Owing to the void space at lower heights, lift-up buildings have high building permeability at ground level and subsequently improve the air circulation in congested urban areas. Despite this advantage, the lift-up design has been sparsely adopted for buildings in urban areas partly because of the lack of understanding of the combined effects of building dimensions and lift-up design on the surrounding pedestrian level wind (PLW) field. Therefore, this study aims to investigate the influence of lift-up buildings with different aspect ratios (height/width) on the surrounding PLW field and pedestrian wind comfort level. Five lift-up buildings with aspect ratios 4:1 to 0.5:1 were tested in a boundary layer wind tunnel and results were compared with those of five buildings with similar dimensions but without lift-up design. The results reveal a strong dependence of the maximum wind speed in lift-up areas with building height, which results subsequently a small area of acceptable wind conditions near tall and slender lift-up buildings. Lift-up designs adopted for short and wide buildings produce larger areas of pedestrian wind comfort. The central cores modified with corner modifications are effective in increasing the pedestrian wind comfort in the lift-up area of tall and slender buildings.

Performance of a circular cylinder piezoelectric wind energy harvester fitted with a splitter plate

This study examines effects of the splitter plate placed in the near wake of a circular cylinder on the performance of a piezoelectric wind energy harvester through wind tunnel experiments. The kinetic energy of the harvester is gained by wind-induced vibrations of the circular cylinder. The splitter plate is attached to the leeward side of the cylinder. The ratio of the splitter plate length to the diameter of the circular cylinder (Lsp/D) ranges from 0.25 to 2.00. After attaching the splitter plate with an appropriate length, the harvester is able to sustain large amplitude vibrations beyond the wind speed range corresponding to vortex-induced vibrations. Thus, the upper bound of the wind speed range for the harvester to harness wind energy is eliminated, which significantly increases the efficiency of the harvester. Compared to the different lengths of the splitter plate, 0.65D has been found to be the optimal length for maximizing the harvested power.