Sabar Bauk

Photon attenuation studies on tropical hardwoods

Abstract Linear attenuation coefficients of a range of tropical hardwoods have been determined at a photon-energy of 59.54 keV. Good accord with mass-density linear dependence is demonstrated. At 60 Co energies seasoned Rhizophora spp, with a mass-density of 1040 kg m −3 , provides percentage depth-doses that are in agreement to within 2% with those tabulated for water.

Measurement of mass attenuation coefficients of Rhizophora spp. binderless particleboards in the 16.59–25.26 keV photon energy range and their density profile using x-ray computed tomography

The mass attenuation coefficients of Rhizophora spp. binderless particleboard with four different particle sizes (samples A, B, C and D) and natural raw Rhizophora spp. wood (sample E) were determined using single-beam photon transmission in the energy range between 16.59 and 25.26 keV. This was done by determining the attenuation of K(α1) X-ray fluorescent (XRF) photons from niobium, molybdenum, palladium, silver and tin targets. The results were compared with theoretical values of young-age breast (Breast 1) and water calculated using a XCOM computer program. It was found that the mass attenuation coefficient of Rhizophora spp. binderless particleboards to be close to the calculated XCOM values in water than natural Rhizophora spp. wood. Computed tomography (CT) scans were then used to determine the density profile of the samples. The CT scan results showed that the Rhizophora spp. binderless particleboard has uniform density compared to natural Rhizophora spp. wood. In general, the differences in the variability of the profile density decrease as the particle size of the pellet samples decreases.

Mass attenuation coefficients of natural Rhizophora spp. wood for X-rays in the 15.77–25.27 keV range

The mass attenuation coefficients (mu/rho) of Rhizophora spp. were determined for photons in the energy range of 15.77-25.27 keV. This was carried out by studying the attenuation of X-ray fluorescent photons from zirconium, molybdenum, palladium, silver, indium and tin targets. The results were compared with theoretical values for average breast tissues in young-age, middle-age and old-age groups calculated using photon cross section database (XCOM), the well-known code for calculating attenuation coefficients and interaction cross-sections. The measured mass attenuation coefficients were found to be very close to the calculated XCOM values in breasts of young-age group.

The thermoluminescence characteristics and the glow curves of thulium doped silica fiber exposed to 10 MV photon and 21 MeV electron radiation

The thermoluminescence (TL) glow curves and kinetics parameters of Thulium (Tm) doped silica cylindrical fibers (CF) are presented. A linear accelerator (LINAC) was used to deliver high-energy radiation of 21MeV electrons and 10MV photons. The CFs were irradiated in the dose range of 0.2-10Gy. The experimental glow curve data was reconstructed by using WinREMS. The WinGCF software was used for the kinetic parameters evaluation. The TL sensitivity of Tm-doped silica CF is about 2 times higher as compared to pure silica CF. Tm-doped silica CF seems to be more sensitive to 21MeV electrons than to 10MV photons. Surprisingly, no supralinearity was displayed and a sub-linear response of Tm-doped silica CF was observed within the analyzed dose range for both 21MeV electrons and 10MV photons. The Tm-doped silica CF glow curve consists of 5 individual glow peaks. The Ea of peak 4 and peak 5 was highly dependent on dose when irradiated with photons. We also noticed that the electron radiation (21MeV) caused a shift of glow peak by 7-13°C to the higher temperature region compared with photons radiation (10MV). Our Tm-doped fibers seem to give high TL response after 21MeV electrons, which gives around 2 times higher peak integral as compared with 10MV photon radiation. We concluded that peak 4 is the first-order kinetic peak and can be used as the main dosimetric peak of Tm-doped silica CF.

XRF Technique for the Evaluation of Gum Arabic Bonded Rhizophora spp. Particleboards as Tissue Equivalent Material

 Abstract—For the first time, Gum Arabic (GA) is used as a binder in particleboards preparation and the attenuation properties of the fabricated particleboards were evaluated to check their suitability as tissue equivalent material. Gum Arabic was added into Rhizophora spp. particleboards of four particle sizes at three different GA adhesive levels. The X-ray fluorescence (XRF) technique was used to measure the linear and the mass attenuation coefficients of the fabricated particleboards at effective energy range of 17.4 - 26.7 keV. This was achieved by determining the attenuation of Kα1 X-ray fluorescent (XRF) photons from niobium, molybdenum, palladium, silver and tin targets. The results were compared with theoretical values of water calculated using XCOM computer program. The mass attenuation coefficients of the GA bonded Rhizophora spp. particleboards were found to be close to the values of water calculated in XCOM at the same photon energies. Luckily, fabricated particleboards showed tissue equivalent results which optimistically can open a new window on the consumption of such a natural adhesive in particleboards as phantom material in dosimetric phantoms and quality control applications.

Development and evaluation of a Perspex anthropomorphic head and neck phantom for three dimensional conformal radiation therapy (3D-CRT)

Purposes To design, construct and evaluate an anthropomorphic head and neck phantom for the dosimetric evaluation of 3D-conformal radiotherapy (3D-CRT) dose planning and delivery, for protocols developed by the Radiation Therapy Oncology Group (RTOG). Materials and methods An anthropomorphic head and neck phantom was designed and fabricated using Perspex material with delineated planning target volumes (PTVs) and organs at risk (OARs) regions. The phantom was imaged, planned and irradiated conformally by a 3D-CRT plan. Dosimetry within the phantom was assessed using thermoluminescent dosimeters (TLDs). The reproducibility of phantoms and TLD readings were checked by three repeated identical irradiations. Subsequent three clinical 3D-CRT plans for nasopharyngeal patients have been verified using the phantom. Measured doses from each dosimeter were compared with those acquired from the treatment planning system (TPS). Results Phantoms measured doses were reproducible with Conclusion The good agreement between predicted and measured dose shows that the phantom is a useful and efficient tool for 3D-CRT technique dosimetric verification.

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio-based adhesive

In this study, some characteristics of Rhizophora spp. particleboards bonded with Serishoom (traditional animal–based adhesive) as a phantom material was investigated. The Rhizophora spp. particleboards were fabricated in two Serishoom adhesive treatment levels (6% and 12%) with three Rhizophora spp. particle sizes (≤ 149 µm, 149 µm – 500 µm, and 500 µm – 1000 µm) at 1 g.cm-3 of the target density. The internal bond strength and the dimensional stability of the Serishoom-bonded Rhizophora spp. particleboards were improved by using the smaller Rhizophora spp. particle size and the higher Serishoom adhesive treatment level. The effective atomic numbers of the Serishoom-bonded Rhizophora spp. particleboards were determineted to be 7,56 to 7,58 by an energy dispersive X-ray, which is in good agreement with those of water and breast tissue. In addition, the density distribution profiles of the fabricated Serishoom-bonded Rhizophora spp. particleboards were determined by the Kriging method with the use Surfer8 computer software, which indicated that there was good density homogeneity throughout the Serishoom-bonded Rhizophora spp. particleboards. The results showed a potential of the Serishoom-bonded Rhizophora spp. particleboard bonded with Serishoom to be used as a phantom material.

The thermoluminescence glow curve and the deconvoluted glow peak characteristics of erbium doped silica fiber exposed to 70-130 kVp x-rays.

In regard to thermoluminescence (TL) applied to dosimetry, in recent times a number of researchers have explored the role of optical fibers for radiation detection and measurement. Many of the studies have focused on the specific dopant concentration, the type of dopant and the fiber core diameter, all key dependencies in producing significant increase in the sensitivity of such fibers. At doses of less than 1 Gy none of these investigations have addressed the relationship between dose response and TL glow peak behavior of erbium (Er)-doped silica cylindrical fibers (CF). For x-rays obtained at accelerating potentials from 70 to 130 kVp, delivering doses of between 0.1 and 0.7 Gy, present study explores the issue of dose response, special attention being paid to determination of the kinetic parameters and dosimetric peak properties of Er-doped CF. The effect of dose response on the kinetic parameters of the glow peak has been compared against other fiber types, revealing previously misunderstood connections between kinetic parameters and radiation dose. Within the investigated dose range there was an absence of supralinearity of response of the Er-doped silica CF, instead sub-linear response being observed. Detailed examination of glow peak response and kinetic parameters has thus been shown to shed new light of the rarely acknowledged issue of the limitation of TL kinetic model and sub-linear dose response of Er-doped silica CF.

A Study of the Properties of Animal-Based Wood Glue

In this study, the green animal-based, which has been prepared by prolonged boiling of the inedible connective tissues of domesticated ungulates, was investigated for adhesive properties. The viscosity of green animal-based wood adhesive was measured and compared with that of urea-formaldehyde (UF) and phenol-formaldehyde (PF) which are widely used synthetic glues in the wood industry. Also, the crude protein, crude fat, crude fiber, nitrogen free extract (NFE) that represents carbohydrate, and ash as the organic components of green animal-based glue was measured. According to the results, the green animal-based wood glue was found suitable to be used in wood industry.

Evaluation of the mass attenuation coefficient and Effective Atomic Number of the Eremurus spp. Root in Mammography Energy Range

The potential of the Eremurus spp. root as a binder in Rhizophora-Eremurus spp. particleboard mammography phantom had been approved. In this study, the potential of Eremurus spp. as a phantom material has been investigated. The effective atomic number of the Eremurus spp. was calculated as an important parameter in the low energy range. Also, the mass attenuation coefficient of the Eremurus spp. root was measured in the 16.63 keV – 25.30 keV photon energy as a mammography range. Although, the effective atomic number of the Eremurus spp. was near to that of tissue, the mass attenuation of the Eremurus spp. root was not found close to those of breast tissue and water phantom. The results show that the Eremurus spp. root can be used just as a binder in phantom and it cannot be as a main phantom material.