Sabine Szunerits

Preparation of Superhydrophobic Coatings on Zinc as Effective Corrosion Barriers

Stable superhydrophobic films with a contact angle of 151 +/- 2 degrees were prepared on zinc substrates by a simple immersion technique into a methanol solution of hydrolyzed 1H,1H,2H,2H-perfluorooctyltrichlorosilane [CF3(CF2)5(CH2)2SiCl3, PFTS] for 5 days at room temperature followed by a short annealing at 130 degrees C in air for 1 h. The superhydrophobic film provides an effective corrosion-resistant coating for the zinc interface when immersed in an aqueous solution of sodium chloride (3% NaCl) for up to 29 days. The corrosion process was investigated by following the change of the water contact angle over time and by electrochemical means. The results are compared to those of unprotected zinc interfaces.

Sensing using localised surface plasmon resonance sensors

The bright colours of noble metal particles have attracted considerable interest since historical times, where they were used as decorative pigments in stained glass windows. More recently, the tuneable optical properties of metal nanoparticles and their addressability via spectroscopic techniques have brought them back into the forefront of fundamental and applied research fields. Much of the recent attention concerning metal nanoparticles such as gold and silver has been their use as small-volume, ultra-sensitive label-free optical sensors. Plasmonic nanoparticles act in this case as transducers that convert changes in the local refractive index into spectral shifts of the localized surface plasmon resonance (LSPR) band. This LSPR-shift assay is a general technique for measuring binding affinities and rates from any molecule that induces a change in the local refractive index around the metallic nanostructures. By attaching molecular recognition elements (chemical or biological ligands) on the nanostructures, specificity and selectivity to the analyte of interest are introduced into the nanosensor. In this review, we will discuss the different methods used to fabricate plasmonic nanosensors. A special emphasis will be given to techniques used to link plasmonic nanostructures to surfaces. While the difference between colorimetric and refractive index sensing approaches will be briefly described, the importance to distinguish between bulk refractive index (RI) sensing and molecular near-field refractive index sensing will be discussed. The recent progress made in the development of novel surface functionalization strategies together with the formation of optically and mechanically stable LSPR sensors will be highlighted.

Reduction and Functionalization of Graphene Oxide Sheets Using Biomimetic Dopamine Derivatives in One Step

An easy and environmentally friendly chemical method for the simultaneous reduction and noncovalent functionalization of graphene oxide (GO) using dopamine derivatives is described. The reaction takes place at room temperature under ultrasonication of an aqueous suspension of GO and a dopamine derivative. X-ray photoelectron spectroscopy, FT-IR spectroscopy, and cyclic voltammetry characterizations revealed that the resulting material consists of graphene functionalized with the dopamine derivative. This one-step protocol is applied for simultaneous reduction and functionalization of graphene oxide with a dopamine derivative bearing an azide function. The chemical reactivity of the azide function was demonstrated by a postfunctionalization with ethynylferrocene using the Cu(I) catalyzed 1,3-dipolar cyloaddition.

Lysozyme detection on aptamer functionalized graphene-coated SPR interfaces.

The paper reports on a surface plasmon resonance (SPR)-based approach for the sensitive and selective detection of lysozyme. The SPR sensor consists of a 50 nm gold film coated with a thin film of reduced graphene oxide (rGO) functionalized with anti-lysozyme DNA aptamer. The SPR chip coating with rGO matrix was achieved through electrophoretic deposition of graphene oxide (GO) at 150 V. Electrophoretic deposition resulted in partial reduction of GO to rGO with a thickness depending on the deposition time. For very short time pulses of 20 s, the resulting rGO film had a thickness of several nanometers and was appropriate for SPR sensing. The utility of the graphene-based SPR sensor for the selective and sensitive detection of proteins was demonstrated using lysozyme as model protein. Functionalization of rGO matrix with anti-lysozyme DNA aptamer through π-stacking interactions allowed selective SPR detection of lysozyme. The graphene-based SPR biosensor provides a means for the label-free, concentration-dependent and selective detection of lysozymes with a detection limit of 0.5 nM.

Recent advances in the development of graphene-based surface plasmon resonance (SPR) interfaces

Surface plasmon resonance (SPR) is a powerful technique for measurement of biomolecular interactions in real-time in a label-free environment. One of the most common techniques for plasmon excitation is the Kretschmann configuration, and numerous studies of ligand–analyte interactions have been performed on surfaces functionalized with a variety of biomolecules, for example DNA, RNA, glycans, proteins, and peptides. A significant limitation of SPR is that the substrate must be a thin metal film. Post-coating of the metal thin film with a thin dielectric top layer has been reported to enhance the performance of the SPR sensor, but is highly dependent on the thickness of the upper layer and its dielectric constant. Graphene is a single-atom thin planar sheet of sp2 carbon atoms perfectly arranged in a honeycomb lattice. Graphene and graphene oxide are good supports for biomolecules because of their large surface area and rich π conjugation structure, making them suitable dielectric top layers for SPR sensing. In this paper, we review some of the key issues in the development of graphene-based SPR chips. The actual challenges of using these interfaces for studying biomolecular interactions will be discussed and the first examples of the use of graphene-on-metal SPR interfaces for biological sensing will be presented.

The synthesis of citrate-modified silver nanoparticles in an aqueous suspension of graphene oxide nanosheets and their antibacterial activity

A composite material consisting of silver nanoparticles (Ag NPs) deposited on graphene oxide (GO) nanosheets is prepared by chemical reduction of Ag metal ions by sodium borohydride (NaBH4) in the presence of trisodium citrate acting as a stabilizing agent to prevent agglomeration of the nanoparticles. The synthesized GO/Ag NPs composite was characterized by UV/vis spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM analysis confirmed a high density of Ag NPs on the GO nanosheets with a particle size range of 2-25 nm. The activity of the GO/Ag NPs suspension as an antibacterial agent against Gram positive bacteria Staphylococcus aureus and Bacillus subtilis was investigated. The percentage of the killing bacterial colonies by Ag NPs (without GO) is found to be 96-97% while 100% of killing bacterial colonies is only obtained using GO/Ag NPs suspension. Moreover, it was also observed that leakage of sugars and proteins from the cell wall of both S. aureus and B. subtilis in interaction with GO/Ag NPs suspension is higher compared to Ag NPs (without GO) and GO nanosheets.

Direct Functionalization of Nanodiamond Particles Using Dopamine Derivatives

The article reports on the strong linking of dopamine derivatives as a simple and a versatile strategy for the surface functionalization of hydroxyl-terminated nanodiamond (ND-OH) particles. Azide- (ND-N(3)) or poly-N-isopropylacrylamide-terminated (ND-PNIPAM) particles were obtained from ND-OH particles through the reaction with the corresponding dopamine derivatives. The azide-terminated ND particles were further derivatized with a fluorescent probe, alkynyl-pyrene, via copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition. The modified ND particles were characterized using transmission Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy, electrochemical measurements, thermogravimetric analysis (TGA), and particle size measurements. The surface loading of ND particles with dopamine was estimated from TGA and UV-vis spectroscopy and was found to be around 0.27 mmol g(-1). Because of its simple, gentle nature and versatility, the chemistry developed in this work can be used as an avenue for the preparation of functional nanodiamond particles for various applications.

Gold–graphene nanocomposites for sensing and biomedical applications

Recent developments in materials science and nanotechnology have propelled the development of a plethora of materials with unique chemical and physical properties for biomedical applications. Graphitic nanomaterials such as carbon nanotubes, fullerenes and, more recently, graphene oxide (GO) and reduced graphene oxide (rGO) have received a great deal of interest in this domain. Besides the exceptional physico-chemical features of these materials, another advantage is that they can be easily produced in good quantities. Moreover, the presence of abundant functional groups on their surface and good biocompatibility make them highly suitable for biomedical applications. Many research groups have utilized GO and rGO nanocargos to effectively deliver insoluble drugs, nucleic acids and other molecules into cells for bioimaging and therapeutic purposes. Gold nanostructures (Au NSs), on the other hand, have also attracted great attention owing to their applications in biomedical fields, organic catalysis, etc. Loading of GO and rGO sheets with Au NSs generates a new class of functional materials with improved properties and thus provides new opportunities in the use of such hybrid materials for catalytic biosensing and biomedical applications. This review article is aimed at providing an insight into the important features of gold-graphene nanocomposites, the current research activities related to the different synthetic routes to produce these nanocomposites, and their potential applications in sensing and biomedical therapy, notably photothermal therapy (PTT).

Preparation of Superhydrophobic Coatings on Zinc, Silicon, and Steel by a Solution-Immersion Technique

Zinc, silicon, and steel superhydrophobic surfaces were prepared by a simple solution-immersion technique. In the case of zinc, the method consists of dipping of the substrate in a prehydrolyzed methanol solution of 1H,1H,2H,2H-(perfluorooctyl)trichlorosilane [CF(3)(CF(2))(5)(CH(2))(2)SiCl(3), PFTS] for 24 h at 50 degrees C. Micron-sized spheres (1.7-2 microm in diameter) were formed on the zinc substrate at 50 degrees C, while a featureless coating was obtained when the solution-immersion process was conducted at room temperature. When the reaction was performed at room temperature, the formation of superhydrophobic coatings took several days (up to 5 days). In contrast, immersion of silicon or steel substrates in the PFTS/methanol solution led to the formation of hydrophobic interfaces even for a prolonged immersion period at 50 degrees C. The formation of superhydrophobic surfaces on silicon and steel surfaces was only possible if a zinc foil was added in the PFTS/methanol solution containing the silicon or steel substrate. X-ray photoelectron spectroscopy analysis was used to characterize the resulting surfaces and to underline a plausible reaction mechanism.

Highly sensitive detection of DNA hybridization on commercialized graphene-coated surface plasmon resonance interfaces.

Strategies employed to interface biomolecules with nanomaterials have considerably advanced in recent years and found practical applications in many different research fields. The construction of nucleic acid modified interfaces together with the label-free detection of hybridization events has been one of the major research focuses in science and technology. In this paper, we demonstrate the high interest of graphene-on-metal surface plasmon resonance (SPR) interfaces for the detection of DNA hybridization events in the attomolar concentration range. The strategy consists on the noncovalent functionalization of graphene-coated SPR interfaces with gold nanostars carrying single-stranded DNA (ssDNA). Upon hybridization with its complementary DNA, desorption of the nanostructures takes place and thus enables the sensitive detection of the DNA hybridization event. The DNA sensor exhibits a detection limit of ≈500 aM for complementary DNA with a linear dynamic range up to 10(-8) M. This label-free DNA detection platform should spur off new interest toward the use of commercially available graphene-coated SPR interfaces.