Saeed Al-Meer

ZnO@C (core@shell) microspheres derived from spent coffee grounds as applicable non-precious electrode material for DMFCs

Although numerous reports have introduced non precious electrocatalysts for methanol oxidation, most of those studies did not consider the corresponding high onset potential which restricts utilization in real fuel cells. In this study, an −90 mV [vs. Ag/AgCl] onset potential non-precious electrocatalyst is introduced as an applicable anode material for the direct methanol fuel cells. Moreover, the proposed material was prepared from a cheap and abundantly existing resource; the spent coffee grounds. Typically, the spent coffee grounds were facilely converted to core@shell (ZnO@C) microspheres through a two-step approach, involving chemical activation and a subsequent calcination at temperature of 700 °C. Activation of the carbon derived from the spent coffee grounds was performed with ZnCl2 which acts as pore-forming agent as well as a precursor for the ZnO. The structure and morphology were characterized by (XRD), (SEM), and (TEM) analyses while the electrochemical characterizations was evaluated by cyclic voltammetry (CV) technique. Besides the comparatively very low onset potential, the introduced microspheres exhibited relatively high current density; 17 mA/cm2. Overall, based on the advantages of the green source of carbon and the good electrocatalytic activity, the spent coffee grounds-derived carbon can be considered a promise anode material for the DMFCs.

Microplastics in coastal environments of the Arabian Gulf

Eight sandy beaches along the coastline of Qatar and four sea surface stations on the eastern coast, adjacent to Doha Bay, were surveyed between December 2014 and March 2015. Microplastics, mainly low density polyethylene and polypropylene, were found in all samples of sediments and seawater. Blue fibers, ranging between 1 and 5mm, were the dominant type of particle present. Abundances on the sea surface varied between 4.38×104 and 1.46×106particles·km-2, with the highest values being consistently found 10km offshore, suggesting the presence of a convergence zone. No significant temporal variability was detected for sea surface samples. The concentration of microplastics in intertidal sediments varied between 36 and 228particlesm-2, with no significant differences among the 8 beaches examined. These results show the pervasiveness of microplastic pollution in coastal environments of the Arabian Gulf. Potential local sources and sinks for microplastics are discussed.

Metal distribution in marine sediment along the Doha Bay, Qatar

Concentrations of 25 heavy metals (Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, V, Zn and Hg) in surface sediments along the Doha Bay from 10 transects each with five stations were studied. Significant differences were observed in metal concentrations between the sampling locations and durations. Higher concentrations were observed in areas where there are a lot of anthropological activities. The distribution of selected metals was presented in contour maps showing the variation between the two periods. In order to further study particle size effect on metal uptake, two different grinding times were administered on four randomly selected samples and the results showed no significant difference on the analysis in the inductively coupled plasma-optical emission spectrometry (ICP-OES) instrument. The overall results of metal analyses were within the international standards criteria, and the results were comparable to the previous studies conducted around Qatar.

Considering the Specific Impact of Harsh Conditions and Oil Weathering on Diversity, Adaptation, and Activity of Hydrocarbon-Degrading Bacteria in Strategies of Bioremediation of Harsh Oily-Polluted Soils

Weathering processes change properties and composition of spilled oil, representing the main reason of failure of bioaugmentation strategies. Our purpose was to investigate the metabolic adaptation of hydrocarbon-degrading bacteria at harsh conditions to be considered to overcome the limitations of bioaugmentation strategies at harsh conditions. Polluted soils, exposed for prolonged periods to weathered oil in harsh soils and weather conditions, were used. Two types of enrichment cultures were employed using 5% and 10% oil or diesel as sole carbon sources with varying the mineral nitrogen sources and C/N ratios. The most effective isolates were obtained based on growth, tolerance to toxicity, and removal efficiency of diesel hydrocarbons. Activities of the newly isolated bacteria, in relation to the microenvironment from where they were isoalted and their interaction with the weathered oil, showed individual specific ability to adapt when exposed to such factors, to acquire metabolic potentialities. Among 39 isolates, ten identified ones by 16S rDNA genes similarities, including special two Pseudomonas isolates and one Citrobacter isolate, showed particularity of shifting hydrocarbon-degrading ability from short chain n-alkanes (n-C12–n-C16) to longer chain n-alkanes (n-C21–n-C25) and vice versa by alternating nitrogen source compositions and C/N ratios. This is shown for the first time.

Novel miniaturized sensors for potentiometric batch and flow-injection analysis (FIA) of perchlorate in fireworks and propellants

Three planar miniaturized perchlorate membrane sensors (3×5 mm(2)) are prepared using a flexible Kaptan substrate coated with nitron-perchlorate (NT-ClO4) [sensor 1], methylene blue-perchlorate (MB-ClO4) [sensor II] and indium-porphyrin (In-Por) [sensor III] as electroactive materials in PVC membranes plasticized with 2-NPPE. Sensors I, II and III display near-Nernstian response for 1.0×10(-5)-1.0×10(-2), 3.1×10(-5)-1.0×10(-2) and 3.1×10(-6)-1.0×10(-2) mol L(-1) ClO4(-) with lower detection limits of 6.1×10(-6), 6.9×10(-6) and 1.2×10(-6) mol L(-1), and anionic calibration slopes of 50.9±0.4, 48.4±0.4 and 57.7±0.3 mV decade(-1), respectively. Methods for determining perchlorate using these sensors offer many attractive advantages including simplicity, flexibility, cost effectiveness, wide linear dynamic response range (0.1-1000 ppm), low detection limit (<1.2×10(-6) mol L(-1)≡0.1 ppm), small sample test volume (100 μL), safety, short response time (<20 s), long life span (~8 weeks), and extended wide working pH range (4.5-8.0). The sensors show high selectivity in the presence of some inorganic ions (e.g., PO4(3-), SO4(2-), S2O3(2-), NO2(-), NO3(-), N3(-), CN(-), Cl(-), Br(-), I(-)) and automation feasibility. Indium-porphyrin based membrane sensor (sensor III) is used as a detector in a wall-jet flow injection set-up to enable accurate flow injection analysis (FIA) of perchlorate in some fireworks without interferences from the associated reducing agents (sulfur and charcoal), binders (dextrin, lactose), coloring agents (calcium, strontium, copper, iron, sodium), color brighten (linseed oil) and regulators (aluminum flakes) which are commonly used in the formulations. The sensor is also used for perchlorate assessment in some propellant powders. The results fairly agree with data obtained by ion-chromatography.

Evaluation of pesticide residues of organochlorine in vegetables and fruits in Qatar: statistical analysis

The study aimed to examine the residues of organochlorines pesticides (OCPs) in vegetables and fruits in Qatar. A total of 127 samples was studied. Ninety percent of the imported samples recorded residues above the maximum residue levels (MRLs). The most frequently detected OCP in the samples was heptachlor (found in 75 samples). In the comparisons between the washed and unwashed samples, no significant differences were observed (P > 0.05). However, the effect of washing process with tap water depended on the type of vegetables and fruits.

Patulin and patulin producing Penicillium spp. occurrence in apples and apple-based products including baby food

INTRODUCTION Patulin has raised the international attention because of its health risk. In fact, it has mutagenic, neurotoxic, immunotoxic, genotoxic and gastrointestinal effects in animals. In the present work, patulin and patulin-producing Penicillium spp. in apple and apple-based products marketed in Qatar were analysed. METHODOLOGY Sampling was carried out using apple fruits and apple-based products. Fungi were isolated from undamaged apples, apple juice and baby apple food. DNA extraction was carried out with DNeasy Plant Mini Kit (QIAGEN, Valencia, USA). The molecular identification of fungal isolates was carried out using ITS1-ITS4 PCR. PCR products were sequenced and blasted. Patulin was extracted and analyzed by LC/MS/MS, then quantified using Agilent 1290UHPLC coupled to 6460 triple quadruple mass spectrometer. RESULTS Forty-five samples of undamaged fresh apple fruits, apple juice and apple-based baby food products sold in different markets in Qatar were surveyed for both fungal and patulin contamination using Liquid Chromatography Tandem Mass Spectrometery (LC/MS/MS). Twenty-five Penicillium spp. isolates were selected, including 23 P. expansum and one isolate each of P. brevicompactum and P. commune. All the tested Penicillium spp. isolates produced patulin in vitro (from 40 to 100 μg/g on Malt Yeast Extract agar medium). Patulin was detected in 100% of apple juice samples at levels ranging from 5.27 to 82.21 µg/kg. Only 5 samples contained patulin levels higher than European Union recommended limit (50 µg/kg). The average patulin contamination was 30.67 µg/kg and 10.92 µg/kg in baby apple juice and in baby apple compote, respectively.

Surfactant/organic solvent free single-step engineering of hybrid graphene-Pt/TiO2 nanostructure: Efficient photocatalytic system for the treatment of wastewater coming from textile industries

In this study, hybrid graphene-Pt/TiO2 nanostructure were synthesized by single-step, inexpensive and surfactant/organic solvent free route; hydrothermal technique. The physicochemical properties of hybrid graphene-Pt/TiO2 nanostructure were carefully analyzed by multiple techniques, including X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The synthesized hybrid nanostructures were utilized as photocatalyst for the degradation of methylene blue (MB) dye under natural environment at average ambient temperature and mean daily global solar radiation, of about 22–25 °C and 374.9 mWh/cm2, respectively. The activity performance indicated considerable degradation of methylene blue (MB) dye and was in the following order Gr (13%), TiO2 (60%) and hybrid graphene-Pt/TiO2 nanostructure (90%) over 21 min under the natural light illumination. The physiochemical characterization suggests that, the tightly attached metalized TiO2 nanoparticles (Pt-TiO2) on the high surface area graphene sheets improved utilization of visible light and increased separation and transfer of photo-excited electron (ē) hole (h+) pairs. Notably, the hybrid graphene-Pt/TiO2 nanostructure exhibited an excellent cyclic stability for methylene blue (MB) dye removal. Finally, the kinetic behavior indicated that the photocatalytic degradation reaction of the dye obeyed the pseudo-first order (Langmuir-Hinshelwood) kinetics model.

Effective NiMn Nanoparticles-Functionalized Carbon Felt as an Effective Anode for Direct Urea Fuel Cells

The internal resistances of fuel cells strongly affect the generated power. Basically, in the fuel cell, the anode can be prepared by deposition of a film from the functional electrocatalyst on a proper gas diffusion layer. Accordingly, an interfacial resistance for the electron transport is created between the two layers. Electrocatalyst-functionalized gas diffusion layer (GDL) can distinctly reduce the interfacial resistance between the catalyst layer and the GDL. In this study, NiMn nanoparticles-decorated carbon felt is introduced as functionalized GDL to be exploited as a ready-made anode in a direct urea fuel cell. The proposed treated GDL was prepared by calcination of nickel acetate/manganese acetate-loaded carbon felt under an argon atmosphere at 850 °C. The physiochemical characterizations confirmed complete reduction for the utilized precursors and deposition of pristine NiMn nanoparticles on the carbon felt fiber. In passive direct urea fuel cells, investigation the performance of the functionalized GDLs indicated that the composition of the metal nanoparticles has to be optimized as the GDL obtained from 40 wt % manganese acetate reveals the maximum generated power density; 36 mW/m2 at room temperature and 0.5 M urea solution. Moreover, the electrochemical measurements proved that low urea solution concentration is preferred as utilizing 0.5 M solution resulted into generating higher power compared to 1.0 and 2.0 M solution. Overall, this study opens a new avenue toward functionalization of the GDL as a novel strategy to overcome the interfacial resistance between the electrocatalyst and the GDL.

Validation of Total Mercury in Marine Sediment and Biological Samples, Using Cold Vapour Atomic Absorption Spectrometry

A method for the measurement of total mercury (T-Hg) in environmental samples using cold vapour atomic absorption spectrometry (CV AAS) has been validated yielding a dynamic range (0.04–10.00 μg/kg) and high certified reference material (CRM) recovery (>90%). The validation was carried out according to International Union of Pure and Applied Chemistry (IUPAC) validation and Eurachem Guides. A freeze-dried and homogenised sample was weighed and then digested using Suprapur acids (HNO3, H2SO4, and HF) with potassium dichromate solution in a hot block digestion system. A calibration curve was constructed (R2 > 0.999). Two CRMs (Marine Sediment Reference Material (PACS-3) and Trace Elements in Muscle Tissue (Trace Elements and Methylmercury in Mussel Tissue (NIST2976)) were utilised for quality assurance and control. The limit of quantification (LOQ) calculated as 0.04 µg/kg, and uncertainty (U) calculated as 2%. The obtained results showed the suitability of this method for direct mercury measurement in environmental samples. Additionally, the proficiency of this method was recognised by accreditation under the standard of International Organization for Standardization (ISO/IEC 17025:2017) for competence of testing and calibration laboratories.