Sahin Coskun

Silicon nanowire network metal-semiconductor-metal photodetectors

We report on the fabrication and characterization of solution-processed, highly flexible, silicon nanowire network based metal-semiconductor-metal photodetectors. Both the active part of the device and the electrodes are made of nanowire networks that provide both flexibility and transparency. Fabricated photodetectors showed a fast dynamic response, 0.43 ms for the rise and 0.58 ms for the fall-time, with a decent on/off ratio of 20. The effect of nanowire-density on transmittance and light on/off behavior were both investigated. Flexible photodetectors, on the other hand, were fabricated on polyethyleneterephthalate substrates and showed similar photodetector characteristics upon bending down to a radius of 1 cm.

All solution processed, nanowire enhanced ultraviolet photodetectors

We report on the fabrication and characterization of transparent and fully solution processed, nanowire based ultraviolet (UV) photodetectors with high responsivity. For this purpose, UV sensitive zinc oxide (ZnO) nanowires were grown hydrothermally on transparent electrodes formed by spray coated network of silver (Ag) nanowires. Fabricated UV photodetectors showed short recovery time, around 4 s, with a decent on/off ratio of 2600. Effect of in-situ annealing and nanowire length was investigated. Our design provides a simple and cost effective approach for the fabrication of high performance UV photodetectors.

Metal-Enhanced Fluorescence from Silver Nanowires with High Aspect Ratio on Glass Slides for Biosensing Applications

High enhancement of fluorescence emission, improved fluorophore photostability, and significant reduction of fluorescence lifetimes have been obtained from high aspect ratio (>100) silver (Ag) nanowires. These quantities are found to depend on the surface loading of Ag nanowires on glass slides, where the enhancement of fluorescence emission increases with the density of nanowires. The surface loading dependence was attributed to the creation of intense electric fields around the network of Ag nanowires and to the coupling of fluorophore excited states that takes place efficiently at a distance of 10 nm from the surface of nanowires, which was confirmed by theoretical calculations. The enhancement of fluorescence emission of fluorescein isothiocyanate (FITC) was assessed by fluorescence spectroscopy and fluorescence-lifetime imaging microscopy (FLIM) to demonstrate the potential of high aspect ratio Ag nanowires. Fluorescence enhancement factors exceeding 14 were observed on Ag nanowires with high loading by FLIM. The photostability of FITC was the highest on nanowires with medium loading under continuous laser excitation for 10 min because of the significant reduction in the fluorescence lifetime of FITC on these surfaces. These results clearly demonstrate the potential of Ag nanowires in metal-enhanced fluorescence-based applications of biosensing on planar surfaces and cellular imaging.

Transparent, highly flexible, all nanowire network germanium photodetectors.

We report on the fabrication and characterization of all nanowire (NW) network photodetectors. For this purpose, germanium (Ge) NW networks are used as active semiconducting elements, whereas single walled carbon nanotube (SWNT) and silver (Ag) NW networks are used as the contacts. Following their synthesis, all NW networks are deposited through simple solution based methods. Photoresponse characteristics and transparency of the photodetectors for different Ge NW densities are measured. The fabricated devices show a large response with short relaxation times (<10 ms), are flexible and transparent within the visible spectrum.

High-performance, bare silver nanowire network transparent heaters

Silver nanowire (Ag NW) networks are one of the most promising candidates for the replacement of indium tin oxide (ITO) thin films in many different applications. Recently, Ag-NW-based transparent heaters (THs) showed excellent heating performance. In order to overcome the instability issues of Ag NW networks, researchers have offered different hybrid structures. However, these approaches not only require extra processing, but also decrease the optical performance of Ag NW networks. So, it is important to investigate and determine the thermal performance limits of bare-Ag-NW-network-based THs. Herein, we report on the effect of NW density, contact geometry, applied bias, flexing and incremental bias application on the TH performance of Ag NW networks. Ag-NW-network-based THs with a sheet resistance and percentage transmittance of 4.3 Ω sq(-1) and 83.3%, respectively, and a NW density of 1.6 NW μm(-2) reached a maximum temperature of 275 °C under incremental bias application (5 V maximum). With this performance, our results provide a different perspective on bare-Ag-NW-network-based transparent heaters.

Silver nanowire decorated heatable textiles

The modification of insulating fabrics with electrically conductive nanomaterials has opened up a novel application field. With the help of Joule heating mechanism, conductive fabrics can be used as mobile heaters. In this work, heatable textiles are fabricated using silver nanowires (Ag NWs). Cotton fabrics are decorated with polyol synthesized Ag NWs via a simple dip-and-dry method. The time-dependent thermal response of the fabrics under different applied voltages is investigated. It is found that the fabrics can be heated to 50 °C under an applied power density of as low as 0.05 W cm(-2). Uniform deposition of Ag NWs resulted in the homogeneous generation of heat. In addition, the stability of the fabrics with time and under different bending and washing conditions is examined. Moreover, a simple control circuit is fabricated and integrated in order to demonstrate the high potential of the fabrics for mobile applications. This work provides a roadmap for researchers who would like to work on heatable textiles with metallic NWs.

Opto-thermoelectric nanotweezers

Optical manipulation of plasmonic nanoparticles provides opportunities for fundamental and technical innovation in nanophotonics. Optical heating arising from the photon-to-phonon conversion is considered as an intrinsic loss in metal nanoparticles, which limits their applications. We show here that this drawback can be turned into an advantage, by developing an extremely low-power optical tweezing technique, termed opto-thermoelectric nanotweezers. By optically heating a thermoplasmonic substrate, a light-directed thermoelectric field can be generated due to spatial separation of dissolved ions within the heating laser spot, which allows us to manipulate metal nanoparticles of a wide range of materials, sizes and shapes with single-particle resolution. In combination with dark-field optical imaging, nanoparticles can be selectively trapped and their spectroscopic response can be resolved in situ. With its simple optics, versatile low-power operation, applicability to diverse nanoparticles and tunable working wavelength, opto-thermoelectric nanotweezers will become a powerful tool in colloid science and nanotechnology.Heating due to optical losses in metal nanoparticles, which is usually an unwanted side effect, is harnessed to realize low-power opto-thermoelectric nanotweezers.

Growth of branched gold nanoparticles on solid surfaces and their use as surface-enhanced Raman scattering substrates

Branched gold (Au) nanoparticles (NPs) were synthesized directly on surfaces of three different supports (silicon, glass, indium tin oxide (ITO)) by following a “seed-mediated” method. Growth of the nanostructures in high yield and all with branched morphology was achieved on all surfaces. Nanostructures with desired characteristics were synthesized by determining the optimum seed size (8 nm Au nanospheres) and pH (3.00) of the growth solution. The Au NPs synthesized under these conditions have branched morphologies with average sizes of ca. 450 nm and are well dispersed on the support surface. Surface-enhanced Raman scattering (SERS) spectroscopy studies were performed using Rhodamine 6G (R6G) as a probe molecule. The results revealed strong SERS activity of the synthesized Au NPs for the detection of R6G in concentrations as low as 1 nM with an enhancement factor (EF) estimated as greater than 8 orders of magnitude.

Enhanced Second Harmonic Generation from Coupled Asymmetric Plasmonic Metal Nanostructures

We show that second harmonic generation can be enhanced by Fano resonant coupling of asymmetric plasmonic metal nanostructures. We develop a theoretical model examining the effects of electromagnetic interaction between two metal nanostructures on the second harmonic generation. We compare the second harmonic generation efficiency of a single plasmonic metal nanostructure with that of two coupled ones. We show that second harmonic generation from a single metal nanostructure can be enhanced about 30 times by attaching a second metal nanostructure with a 10 times higher quality factor than that of the first one. The origin of this enhancement is Fano resonant coupling of the two metal nanostructures. We support our findings on Fano enhancement of second harmonic generation by an experimental study of a coupled plasmonic system composed of a silver nanoparticle and a silver nanowire on glass surface in which the ratio of the quality factors are also estimated to be around 10 times.

Genotoxicity study of high aspect ratio silver nanowires

ABSTRACT The genotoxicity potential of silver nanowires synthesized via the solution-based polyol method has been investigated. They were found to be non-mutagenic in three Salmonella strains and were not genotoxic in a clastogenicity assay in mice. Residual surfactant was found to have an effect on the toxicological properties of the nanowires by increasing the rate of Ag+ release. Residual surfactant can be easily degraded via a UV treatment.