Saji George

Polyethyleneimine Coating Enhances the Cellular Uptake of Mesoporous Silica Nanoparticles and Allows Safe Delivery of siRNA and DNA Constructs

Surface-functionalized mesoporous silica nanoparticles (MSNP) can be used as an efficient and safe carrier for bioactive molecules. In order to make the MSNP a more efficient delivery system, we modified the surface of the particles by a functional group that enhances cellular uptake and allows nucleic acid delivery in addition to traditional drug delivery. Noncovalent attachment of polyethyleneimine (PEI) polymers to the surface not only increases MSNP cellular uptake but also generates a cationic surface to which DNA and siRNA constructs could be attached. While efficient for intracellular delivery of these nucleic acids, the 25 kD PEI polymer unfortunately changes the safety profile of the MSNP that is otherwise very safe. By experimenting with several different polymer molecular weights, it was possible to retain high cellular uptake and transfection efficiency while reducing or even eliminating cationic MSNP cytotoxicity. The particles coated with the 10 kD PEI polymer were particularly efficient for transducing HEPA-1 cells with a siRNA construct that was capable of knocking down GFP expression. Similarly, transfection of a GFP plasmid induced effective expression of the fluorescent protein in >70% cells in the population. These outcomes were quantitatively assessed by confocal microscopy and flow cytometry. We also demonstrated that the enhanced cellular uptake of the nontoxic cationic MSNP enhances the delivery of the hydrophobic anticancer drug, paclitaxel, to pancreatic cancer cells. In summary, we demonstrate that, by a careful selection of PEI size, it is possible to construct cationic MSNP that are capable of nucleotide and enhanced drug delivery with minimal or no cytotoxicity. This novel use of a cationic MSNP extends its therapeutic use potential.

Use of a Rapid Cytotoxicity Screening Approach to Engineer a Safer Zinc Oxide Nanoparticle through Iron Doping

The establishment of verifiably safe nanotechnology requires the development of assessment tools to identify hazardous nanomaterial properties that could be modified to improve nanomaterial safety. While there is a lot of debate of what constitutes appropriate safety screening methods, one approach is to use the assessment of cellular injury pathways to collect knowledge about hazardous material properties that could lead to harm to humans and the environment. We demonstrate the use of a multiparameter cytotoxicity assay that evaluates toxic oxidative stress to compare the effects of titanium dioxide (TiO(2)), cerium oxide (CeO(2)), and zinc oxide (ZnO) nanoparticles in bronchial epithelial and macrophage cell lines. The nanoparticles were chosen on the basis of their volume of production and likelihood of spread to the environment. Among the materials, dissolution of ZnO nanoparticles and Zn(2+) release were capable of ROS generation and activation of an integrated cytotoxic pathway that includes intracellular calcium flux, mitochondrial depolarization, and plasma membrane leakage. These responses were chosen on the basis of the compatibility of the fluorescent dyes that contemporaneously assess their response characteristics by a semiautomated epifluorescence procedure. Purposeful reduction of ZnO cytotoxicity was achieved by iron doping, which changed the material matrix to slow Zn(2+) release. In summary, we demonstrate the utility of a rapid throughput, integrated biological oxidative stress response pathway to perform hazard ranking of a small batch of metal oxide nanoparticles, in addition to showing how this assay can be used to improve nanosafety by decreasing ZnO dissolution through Fe doping.

Use of a High Throughput Screening Approach Coupled With In Vivo Zebrafish Embryo Screening to Develop Hazard Ranking for Engineered Nanomaterials

Because of concerns about the safety of a growing number of engineered nanomaterials (ENM), it is necessary to develop high-throughput screening and in silico data transformation tools that can speed up in vitro hazard ranking. Here, we report the use of a multiparametric, automated screening assay that incorporates sublethal and lethal cellular injury responses to perform high-throughput analysis of a batch of commercial metal/metal oxide nanoparticles (NP) with the inclusion of a quantum dot (QD1). The responses chosen for tracking cellular injury through automated epifluorescence microscopy included ROS production, intracellular calcium flux, mitochondrial depolarization, and plasma membrane permeability. The z-score transformed high volume data set was used to construct heat maps for in vitro hazard ranking as well as showing the similarity patterns of NPs and response parameters through the use of self-organizing maps (SOM). Among the materials analyzed, QD1 and nano-ZnO showed the most prominent lethality, while Pt, Ag, SiO2, Al2O3, and Au triggered sublethal effects but without cytotoxicity. In order to compare the in vitro with the in vivo response outcomes in zebrafish embryos, NPs were used to assess their impact on mortality rate, hatching rate, cardiac rate, and morphological defects. While QDs, ZnO, and Ag induced morphological abnormalities or interfered in embryo hatching, Pt and Ag exerted inhibitory effects on cardiac rate. Ag toxicity in zebrafish differed from the in vitro results, which is congruent with this materials designation as extremely dangerous in the environment. Interestingly, while toxicity in the initially selected QD formulation was due to a solvent (toluene), supplementary testing of additional QDs selections yielded in vitro hazard profiling that reflect the release of chalcogenides. In conclusion, the use of a high-throughput screening, in silico data handling and zebrafish testing may constitute a paradigm for rapid and integrated ENM toxicological screening.

Decreased Dissolution of ZnO by Iron Doping Yields Nanoparticles with Reduced Toxicity in the Rodent Lung and Zebrafish Embryos

We have recently shown that the dissolution of ZnO nanoparticles and Zn(2+) shedding leads to a series of sublethal and lethal toxicological responses at the cellular level that can be alleviated by iron doping. Iron doping changes the particle matrix and slows the rate of particle dissolution. To determine whether iron doping of ZnO also leads to lesser toxic effects in vivo, toxicity studies were performed in rodent and zebrafish models. First, we synthesized a fresh batch of ZnO nanoparticles doped with 1-10 wt % of Fe. These particles were extensively characterized to confirm their doping status, reduced rate of dissolution in an exposure medium, and reduced toxicity in a cellular screen. Subsequent studies compared the effects of undoped to doped particles in the rat lung, mouse lung, and the zebrafish embryo. The zebrafish studies looked at embryo hatching and mortality rates as well as the generation of morphological defects, while the endpoints in the rodent lung included an assessment of inflammatory cell infiltrates, LDH release, and cytokine levels in the bronchoalveolar lavage fluid. Iron doping, similar to the effect of the metal chelator, DTPA, interfered in the inhibitory effects of Zn(2+) on zebrafish hatching. In the oropharyngeal aspiration model in the mouse, iron doping was associated with decreased polymorphonuclear cell counts and IL-6 mRNA production. Doped particles also elicited decreased heme oxygenase 1 expression in the murine lung. In the intratracheal instillation studies in the rat, Fe doping was associated with decreased polymorphonuclear cell counts, LDH, and albumin levels. All considered, the above data show that Fe doping is a possible safe design strategy for preventing ZnO toxicity in animals and the environment.

A Predictive Toxicological Paradigm for the Safety Assessment of Nanomaterials

The rate of expansion of nanomaterials calls for the consideration of appropriate toxicological paradigms in the safety assessment of nanomaterials. We advocate a predictive toxicological paradigm for the assessment of nanomaterial hazards. The predictive toxicological approach is defined as establishing and using mechanisms and pathways of injury at a cellular and molecular level to prioritize screening for adverse biological effects and health outcomes in vivo. Specifically as it relates to nanomaterials, a predictive approach has to consider the physicochemical properties of the material that leads to molecular or cellular injury and also has to be valid in terms of disease pathogenesis in whole organisms.

Role of Fe doping in tuning the band gap of TiO2 for the photo-oxidation-induced cytotoxicity paradigm.

UV-light-induced electron-hole (e(-)/h(+)) pair generation with free radical production in TiO(2)-based nanoparticles is a major conceptual paradigm for biological injury. However, to date, this hypothesis has been difficult to experimentally verify due to the high energy of UV light that is intrinsically highly toxic to biological systems. Here, a versatile flame spray pyrolysis (FSP) synthetic process has been exploited to synthesize a library of iron-doped (0-10 wt%) TiO(2) nanoparticles. These particles have been tested for photoactivation-mediated cytotoxicity using near-visible light exposure. The reduction in TiO(2) band gap energy with incremental levels of Fe loading maintained the nanoparticle crystalline structure in spite of homogeneous Fe distribution (demonstrated by XRD, HRTEM, SAED, EFTEM, and EELS). Photochemical studies showed that band gap energy was reciprocally tuned proportional to the Fe content. The photo-oxidation capability of Fe-doped TiO(2) was found to increase during near-visible light exposure. Use of a macrophage cell line to evaluate cytotoxic and ROS production showed increased oxidant injury and cell death in parallel with a decrease in band gap energy. These findings demonstrate the importance of band gap energy in the phototoxic response of the cell to TiO(2) nanoparticles and reflect the potential of this material to generate adverse effects in humans and the environment during high-intensity light exposure.

Dispersal State of Multiwalled Carbon Nanotubes Elicits Profibrogenic Cellular Responses That Correlate with Fibrogenesis Biomarkers and Fibrosis in the Murine Lung

We developed a dispersal method for multiwalled carbon nanotubes (MWCNTs) that allows quantitative assessment of dispersion on profibrogenic responses in tissue culture cells and in mouse lung. We demonstrate that the dispersal of as-prepared (AP), purified (PD), and carboxylated (COOH) MWCNTs by bovine serum albumin (BSA) and dipalmitoylphosphatidylcholine (DPPC) influences TGF-β1, PDGF-AA, and IL-1β production in vitro and in vivo. These biomarkers were chosen based on their synergy in promoting fibrogenesis and cellular communication in the epithelial-mesenchymal cell trophic unit in the lung. The effect of dispersal was most noticeable in AP- and PD-MWCNTs, which are more hydrophobic and unstable in aqueous buffers than hydrophilic COOH-MWCNTs. Well-dispersed AP- and PD-MWCNTs were readily taken up by BEAS-2B, THP-1 cells, and alveolar macrophages (AM) and induced more prominent TGF-β1 and IL-1β production in vitro and TGF-β1, IL-1β, and PDGF-AA production in vivo than nondispersed tubes. Moreover, there was good agreement between the profibrogenic responses in vitro and in vivo as well as the ability of dispersed tubes to generate granulomatous inflammation and fibrosis in airways. Tube dispersal also elicited more robust IL-1β production in THP-1 cells. While COOH-MWCNTs were poorly taken up in BEAS-2B and induced little TGF-β1 production, they were bioprocessed by AM and induced less prominent collagen deposition at sites of nongranulomatous inflammation in the alveolar region. Taken together, these results indicate that the dispersal state of MWCNTs affects profibrogenic cellular responses that correlate with the extent of pulmonary fibrosis and are of potential use to predict pulmonary toxicity.

Quantitative Techniques for Assessing and Controlling the Dispersion and Biological Effects of Multiwalled Carbon Nanotubes in Mammalian Tissue Culture Cells

In vivo studies have demonstrated that the state of dispersion of carbon nanotubes (CNTs) plays an important role in generating adverse pulmonary effects. However, little has been done to develop reproducible and quantifiable dispersion techniques to conduct mechanistic studies in vitro. This study was to evaluate the dispersion of multiwalled carbon nanotubes (MWCNTs) in tissue culture media, with particular emphasis on understanding the forces that govern agglomeration and how to modify these forces. Quantitative techniques such as hydrophobicity index, suspension stability index, attachment efficiency, and dynamic light scattering were used to assess the effects of agglomeration and dispersion of as-prepared (AP), purified (PD), or carboxylated (COOH) MWCNTs on bronchial epithelial and fibroblast cell lines. We found that hydrophobicity is the major factor determining AP- and PD-MWCNT agglomeration in tissue culture media but that the ionic strength is the main factor determining COOH-MWCNT suspendability. Bovine serum albumin (BSA) was an effective dispersant for MWCNTs, providing steric and electrosteric hindrances that are capable of overcoming hydrophobic attachment and the electrostatic screening of double layer formation in ionic media. Thus, BSA was capable of stabilizing all tube versions. Dipalmitoylphosphatidylcholine (DPPC) provided additional stability for AP-MWCNTs in epithelial growth medium (BEGM). While the dispersion state did not affect cytotoxicity, improved dispersion of AP- and PD-MWCNTs increased TGF-β1 production in epithelial cells and fibroblast proliferation. In summary, we demonstrate how quantitative techniques can be used to assess the agglomeration state of MWCNTs when conducting mechanistic studies on the effects of dispersion on tissue culture cells.

Nanomaterials in the Environment: From Materials to High-Throughput Screening to Organisms

One of the challenges in the field of nanotechnology is environmental health and safety (EHS), including consideration of the properties of engineered nanomaterials (ENMs) that could pose dangers to the environment. Progress in the field of nanomaterial development and nanotoxicology was presented at the International Conference on the Environmental Implications of Nanotechnology at the California NanoSystems Institute (CNSI) on the UCLA campus on May 11-14, 2010. This event was cohosted by the University of California Center for the Environmental Implications of Nanotechnology (UC CEIN) and the Center for the Environmental Implications of NanoTechnology (CEINT) based at Duke University. Participants included scientists and scholars from various backgrounds, including chemistry, biology, engineering, nanomaterial science, toxicology, ecology, mathematics, sociology, and policy makers. The topics of discussion included safety evaluation of ENMs from an environmental perspective, nanotoxicology, ecotoxicology, safe design of ENMs, environmental risk assessment, public perception of nanotechnology, application of ENMs in consumer products, and many more. The UC CEIN presented data on their predictive toxicological approach to the assessment of ENM libraries, which were designed and synthesized to develop an understanding of the material properties that could lead to hazard generation at the cellular and organismal levels in the environment. This article will focus on the first metal oxide ENM library that was introduced to harmonize research activities in the UC CEIN, with particular emphasis on the safety assessment of ZnO on cells and organisms. Methods of decreasing the observed toxic effects will also be discussed as an integral component of the UC CEINs activity in developing safer nanomaterials to lessen their environmental impacts.

High Content Screening in Zebrafish Speeds up Hazard Ranking of Transition Metal Oxide Nanoparticles

Zebrafish is an aquatic organism that can be used for high content safety screening of engineered nanomaterials (ENMs). We demonstrate, for the first time, the use of high content bright-field and fluorescence-based imaging to compare the toxicological effect of transition metal oxide (CuO, ZnO, NiO, and Co(3)O(4)) nanoparticles in zebrafish embryos and larvae. High content bright-field imaging demonstrated potent and dose-dependent hatching interference in the embryos, with the exception of Co(3)O(4) which was relatively inert. We propose that the hatching interference was due to the shedding of Cu and Ni ions, compromising the activity of the hatching enzyme, ZHE1, similar to what we previously proposed for Zn(2+). This hypothesis is based on the presence of metal-sensitive histidines in the catalytic center of this enzyme. Co-introduction of a metal ion chelator, diethylene triamine pentaacetic acid (DTPA), reversed the hatching interference of Cu, Zn, and Ni. While neither the embryos nor larvae demonstrated morphological abnormalities, high content fluorescence-based imaging demonstrated that CuO, ZnO, and NiO could induce increased expression of the heat shock protein 70:enhanced green fluorescence protein (hsp70:eGFP) in transgenic zebrafish larvae. Induction of this response by CuO required a higher nanoparticle dose than the amount leading to hatching interference. This response was also DTPA-sensitive. We demonstrate that high content imaging of embryo development, morphological abnormalities, and HSP70 expression can be used for hazard ranking and determining the dose-response relationships leading to ENM effects on the development of the zebrafish embryo.