Sajitha Kalathingal

Diagnostic imaging for temporomandibular disorders and orofacial pain

The focus of this article is diagnostic imaging used for the evaluation of temporomandibular disorders and orofacial pain patients. Imaging modalities discussed include conventional panoramic radiography, panoramic temporomandibular joint imaging mode, cone beam computed tomography, and magnetic resonance imaging. The imaging findings associated with common diseases of the temporomandibular joint are presented and indications for brain imaging are discussed. Advantages and disadvantages of each imaging modality are presented as well as illustrations of the various imaging techniques.

An evaluation of microbiologic contamination on a phosphor plate system: is weekly gas sterilization enough?

OBJECTIVE This study was performed to determine: 1) the rate and source of microbiologic contamination of photostimulable phosphor plates (PSP) in a predoctoral clinic; and 2) whether a combination of weekly gas sterilization and barrier protocols can prevent contamination of PSP plates. METHODS Fifty plates in clinical use and 25 gas-sterilized control plates were selected for examination. The PSP plates were pressed onto blood agar medium and incubated at 37 degrees C. The number, size, distribution, and variety of resulting colonies were noted. To test whether these bacteria could have come from oral sources, 17 colonies were selected for culture on Mitis-Salivarius (M-S) agar. Those colonies that grew on the M-S agar were Gram stained. RESULTS Twenty-eight test plates (56%) exhibited growth of bacterial colonies on blood agar. Seventeen of those bacterial colonies were selected for growth on M-S agar, and 13 (76.47%) showed growth, 69% of them gram positive. CONCLUSION Our results indicate reinforcing standard precautions of infection control for intraoral radiography, and that gas sterilization of plates after each days clinical use is a potential solution.

Rating the extent of surface scratches on photostimulable storage phosphor plates in a dental school environment

OBJECTIVE The aims of this study were (1) to subjectively quantify the degree of scratching and smudging that had taken place in the junior clinic in the 9 months following the implementation of digital radiology; (2) to compare the findings with a previously published report; and (3) to identify areas in the protocol and training that can be refined to minimize future scratching and smudging. METHODS Seven sets of blank clinical photostimulable storage phosphor (PSP) plates were scanned after exposing them at 65 kV and 7 mA for 0.80 s. Scanned plates were lightly wiped with a soft cloth and alcohol, repackaged in plastic sleeves, re-exposed and rescanned. The two sets of resulting images were subjectively rated independently by two investigators for artefacts and placed in five categories. RESULTS Of all the images, approximately 75% were rated in the top 3 categories (most readable), leaving 17% and 8% in the poor and unsatisfactory categories, respectively. Mean rated values of the two image sets (before and after wiping) were not statistically different, but ratings slightly improved after cleaning the plates. CONCLUSIONS Wiping all plates to remove surface contamination may not always be necessary or desirable. Systems that are designed to minimize handling of the plates may help minimize scratching of them.

Cone-beam CT analysis of patients with obstructive sleep apnea compared to normal controls

Purpose To evaluate the upper airway dimensions of obstructive sleep apnea (OSA) and control subjects using a cone-beam computed tomography (CBCT) unit commonly applied in clinical practice in order to assess airway dimensions in the same fashion as that routinely employed in a clinical setting. Materials and Methods This was a retrospective analysis utilizing existing CBCT scans to evaluate the dimensions of the upper airway in OSA and control subjects. The CBCT data of sixteen OSA and sixteen control subjects were compared. The average area, average volume, total volume, and total length of the upper airway were computed. Width and anterior-posterior (AP) measurements were obtained on the smallest axial slice. Results OSA subjects had a significantly smaller average airway area, average airway volume, total airway volume, and mean airway width. OSA subjects had a significantly larger airway length measurement. The mean A-P distance was not significantly different between groups. Conclusion OSA subjects have a smaller upper airway compared to controls with the exception of airway length. The lack of a significant difference in the mean A-P distance may indicate that patient position during imaging (upright vs. supine) can affect this measurement. Comparison of this study with a future prospective study design will allow for validation of these results.

Unusual presentation of extranodal diffuse large B-cell lymphoma in the head and neck: description of a case with emphasis on radiographic features and review of the literature.

A very unusual radiographic presentation of non-Hodgkin lymphoma (NHL) involving the maxilla is described. The patient was initially managed with antibiotics prescribed to treat what was thought to represent an odontogenic infection. After unsuccessful antibiotic therapy, the patient was referred to an oral surgery clinic where CBCT was performed. CBCT revealed an atypical generalized sclerosis of the affected bone rather than the usual lytic radiographic pattern associated with NHL. Destruction of the sinus floor with infiltration of the sinus was also present. This rare radio-opaque radiographic presentation is described in detail together with the clinical presentation and histopathological findings. The important radiographic features suggesting malignancy that were present in this atypical case of NHL are discussed. A differential diagnosis highlighting the differences between NHL, osteomyelitis and osteosarcoma is also provided.

The effectiveness of a pre-procedural mouthrinse in reducing bacteria on radiographic phosphor plates

Purpose This study assessed the effectiveness of three antimicrobial mouthrinses in reducing microbial growth on photostimulable phosphor (PSP) plates. Materials and Methods Prior to performing a full-mouth radiographic survey (FMX), subjects were asked to rinse with one of the three test rinses (Listerine®, Decapinol®, or chlorhexidine oral rinse 0.12%) or to refrain from rinsing. Four PSP plates were sampled from each FMX through collection into sterile containers upon exiting the scanner. Flame-sterilized forceps were used to transfer the PSP plates onto blood agar plates (5% sheep blood agar). The blood agar plates were incubated at 37℃ for up to 72 h. An environmental control blood agar plate was incubated with each batch. Additionally, for control, 25 gas-sterilized PSP plates were plated onto blood agar and analyzed. Results The mean number of bacterial colonies per plate was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse negative control groups. Only the chlorhexidine and Listerine groups were significantly different (p=0.005). No growth was observed for the 25 gas-sterilized control plates or the environmental control blood agar plates. Conclusion The mean number of bacterial colonies was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse groups. Nonetheless, a statistically significant difference was found only in the case of Listerine. Additional research is needed to test whether a higher concentration (0.2%) or longer exposure period (two consecutive 30 s rinse periods) would be helpful in reducing PSP plate contamination further with chlorhexidine.

Application of radiopaque micro-particle fillers for 3-D imaging of periodontal pocket analogues using cone beam CT

BACKGROUND Periodontitis is an infectious/inflammatory disease most often diagnosed by deepening of the gingival sulcus, which leads to periodontal pockets (PPs) conventional manual periodontal probing does not provide detailed information on the three-dimensional (3-D) nature of PPs. OBJECTIVES To determine whether accurate 3-D analyses of the depths and volumes of calibrated PP analogues (PPAs) can be obtained by conventional cone beam computed tomography (CBCT) coupled with novel radiopaque micro-particle fillers (described in the companion paper) injected into the PPAs. METHODS Two PPA models were employed: (1) a human skull model with artificial gingiva applied to teeth with alveolar bone loss and calibrated PPAs, and (2) a pig jaw model with alveolar bone loss and surgically-induced PPAs The PPAs were filled with controlled amounts of radiopaque micro-particle filler using volumetric pipetting Inter-method and intra-method agreement tests were then used to compare the PPA depths and volumes obtained from CBCT images with values obtained by masked examiners using calibrated manual methods. RESULTS Significant inter-method agreement (0.938-0.991) and intra-method agreement (0.94-0.99) were obtained when comparing analog manual data to digital CBCT measurements enabled by the radiopaque filler. SIGNIFICANCE CBCT imaging with radiopaque micro-particle fillers is a plausible means of visualizing and digitally assessing the depths, volumes, and 3-D shapes of PPs This approach could transform the diagnosis and treatment planning of periodontal disease, with particular initial utility in complex cases Efforts to confirm the clinical practicality of these fillers are currently in progress.

Development of radiopaque, biocompatible, antimicrobial, micro-particle fillers for micro-CT imaging of simulated periodontal pockets

OBJECTIVES Approximately 109 bacteria can be harbored within periodontal pockets (PP) along with inflammatory byproducts implicated in the pathophysiology of systemic diseases linked to periodontitis (PD). Calculation of this inflammatory burden has involved estimation of total pocket surface area using analog data from conventional periodontal probing which is unable to determine the three-dimensional (3-D) nature of PP. The goals of this study are to determine the radiopacity, biocompatibility, and antimicrobial activity of transient micro-particle fillers in vitro and demonstrate their capability for 3-D imaging of artificial PP (U.S. Patent publication number: 9814791 B2). METHODS Relative radiopacity values of various metal oxide fillers were obtained from conventional radiography and micro-computed tomography (μCT) using in vitro models. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays were used to measure the biocompatibility of calcium tungstate (CaWO4) particles by determination of viable keratinocytes percentage (%) after exposure. After introducing an antibacterial compound (K21) to the radiopaque agent, antimicrobial tests were conducted using Porphyromonas gingivalis (P. gingivalis) and Streptococcus gordonii (S. gordonii) strains and blood agar plates. RESULTS CaWO4 micro-particle-bearing fillers exhibited an X-ray radiopacity distinct from tooth structures that enabled 3-D visualization of an artificial periodontal pocket created around a human tooth. MTT assays indicated that CaWO4 micro-particles are highly biocompatible (increasing the viability of exposed keratinocytes). Radiopaque micro-particle fillers combined with K21 showed significant antimicrobial activity for P. gingivalis and S. gordonii. SIGNIFICANCE The plausibility of visualizing PP with 3-D radiographic imaging using new radiopaque, biocompatible, transient fillers was demonstrated in vitro. Antibacterial (or other) agents added to this formula could provide beneficial therapeutic features along with the diagnostic utility.

Interdisciplinary treatment of an adult with bilateral cleft lip and palate with missing premaxilla: The prosthodontic perspective

Conventional orthognathic surgery and orthodontic techniques occasionally fail to completely correct the occlusal relationship and esthetic deficits of patients with cleft lip and palate and severe midface deficiency. Prosthodontic rehabilitation is often required to establish adequate occlusion and provide a more proportional facial appearance. This clinical report describes the interdisciplinary management of an adult with complete bilateral cleft lip and palate who was treated with distraction osteogenesis using a rigid external distraction device for maxillary advancement and his prosthodontic rehabilitation with a dual path removable partial overdenture to develop definitive facial and dental esthetic form.

Predoctoral and Postdoctoral Education on Cone-Beam Computed Tomography

Objectives As the use of cone beam computed tomography (CBCT) in dentistry continues to grow, questions related to appropriate radiation safety, training, and interpretation arise. Recognizing this need, the American Dental Association published an advisory statement for the safe use of CBCT in dentistry and recommended that guidelines for appropriate training be established. The purpose of this study was to assess radiation safety concerns related to CBCT and identify voids in current education on CBCT for the predoctoral dental curriculum and continuing dental education. Methods A survey was mailed to general practitioners, oral surgeons, and periodontists in the Georgia Dental Association (n = 415). Results One hundred twenty‐one surveys were received for a response rate of 29%. Sixty‐eight percent of practitioners reported using CBCT, with 89% having used it for over 2 years. Few (12.4%) had experience with CBCT in dental school. Interest in continuing dental education on CBCT was reported at 59.8% and 43.6% for current users and nonusers of CBCT, respectively. Approximately 50% reported using precautionary radiation safety measures, and the methods used were varied. Conclusions Although a higher survey return rate would allow for stronger evidence, this project identified some areas of education voids including radiation safety and the factors that contribute to patient dose; CBCT basics including instruction on the limitations of CBCT; CBCT anatomy and pathology with additional time dedicated to the paranasal sinuses; and interpretation.