Sakiko Kikuchi

Bacteriogenic Fe(III) (Oxyhydr)oxides Characterized by Synchrotron Microprobe Coupled with Spatially Resolved Phylogenetic Analysis

Ubiquitous presence of microbes in aquatic systems and their inherent ability of biomineralization make them extremely important agents in the geochemical cycling of inorganic elements. However, the detailed mechanisms of environmental biomineralization (e.g., the actual reaction rates, the temporal and spatial dynamics of these processes) are largely unknown, because there are few adequate analytical techniques to observe the biogenic oxidation/reduction reactions in situ. Here, we report a novel technical approach to characterize specific biominerals associated with a target microbe on high spatial resolution. The technique was developed by combining directly in situ phylogenetic analysis, fluorescence in situ hybridization (FISH), with a synchrotron microprobe method, micro X-ray absorption fine structure spectroscopy (μ-XAFS), and was applied to iron mineral deposition by iron(II)-oxidizing bacteria (IOB) in environmental samples. In situ visualization of microbes revealed that in natural iron mats, Betaproteobacteria dominated by IOB were dominantly localized within 10 μm of the surface. Furthermore, in situ chemical speciation by the synchrotron microprobe suggested that the Fe local structure at the IOB accumulating parts was dominantly composed of short-ordered Fe-O(6) linkage, which is not observed in bulk iron mat samples. The present study indicates that coupled XAFS-FISH could be a potential technique to provide direct information on specific biogenic reaction mediated by target microorganism.

Prokaryotic Abundance and Community Composition in a Freshwater Iron-Rich Microbial Mat at Circumneutral pH

The abundance, diversity and composition of bacterial and archaeal communities in a freshwater iron-rich microbial mat were investigated using culture-dependent and culture-independent methods. The sampling site is a mixing zone where ferrous-iron-rich fluids encounter oxygen-rich environments. Quantitative PCR analysis shows that Bacteria dominated the mat community (>99% of the total cell numbers). Phylotypes related to iron-oxidizers in Gallionellaceae, methano/methylotrophs in Methylophilaceae and Methylococcaceae, sulfide-oxidizers in Sulfuricurvum and an uncultured clone group, called Terrestrial group I or the 1068 group, in the Epsilonproteobacteria were detected in the clone library from the original sample and/or the enrichment cultures. This result suggests that these members may play a role in Fe, S and C cycling in the mixing zone. Although Archaea were minor constituents numerically, phylogenetic analysis indicates that unique and diverse yet-uncultivated Archaea are present in the iron-rich mat. The phylotypes of these yet-uncultivated Archaea belong to environmental clone groups that have been recovered from other mixing zones in terrestrial and marine environments, and some of our phylotypes have significantly low similarity (80% or lower) with the archaeal clones reported previously. Our results provide further insights into the bacterial and archaeal communities in a microaerobic iron-rich freshwater environment in mixing zones.

Comparative Analysis of Microbial Communities in Iron-Dominated Flocculent Mats in Deep Sea Hydrothermal Environments

ABSTRACT It has been suggested that iron is one of the most important energy sources for photosynthesis-independent microbial ecosystems in the ocean crust. Iron-metabolizing chemolithoautotrophs play a key role as primary producers, but little is known about their distribution and diversity and their ecological role as submarine iron-metabolizing chemolithotrophs, particularly the iron oxidizers. In this study, we investigated the microbial communities in several iron-dominated flocculent mats found in deep-sea hydrothermal fields in the Mariana Volcanic Arc and Trough and the Okinawa Trough by culture-independent molecular techniques and X-ray mineralogical analyses. The abundance and composition of the 16S rRNA gene phylotypes demonstrated the ubiquity of zetaproteobacterial phylotypes in iron-dominated mat communities affected by hydrothermal fluid input. Electron microscopy with energy-dispersive X-ray microanalysis and X-ray absorption fine structure (XAFS) analysis revealed the chemical and mineralogical signatures of biogenic Fe-(oxy)hydroxide species and the potential contribution of Zetaproteobacteria to the in situ generation. These results suggest that putative iron-oxidizing chemolithoautotrophs play a significant ecological role in producing iron-dominated flocculent mats and that they are important for iron and carbon cycles in deep-sea low-temperature hydrothermal environments. IMPORTANCE We report novel aspects of microbiology from iron-dominated flocculent mats in various deep-sea environments. In this study, we examined the relationship between Zetaproteobacteria and iron oxides across several hydrothermally influenced sites in the deep sea. We analyzed iron-dominated mats using culture-independent molecular techniques and X-ray mineralogical analyses. The scanning electron microscopy–energy-dispersive X-ray spectroscopy SEM-EDS analysis and X-ray absorption fine structure (XAFS) analysis revealed chemical and mineralogical signatures of biogenic Fe-(oxy)hydroxide species as well as the potential contribution of the zetaproteobacterial population to the in situ production. These key findings provide important information for understanding the mechanisms of both geomicrobiological iron cycling and the formation of iron-dominated mats in deep-sea hydrothermal fields.

Characterization of biogenic iron oxides collected by the newly designed liquid culture method using diffusion chambers

We designed a new culture method for neutrophilic iron-oxidizing bacteria using liquid medium (i) to study the formation and mineralogical characteristics of biogenic iron oxides (BIOS) and (ii) to apply BIOS to various scientific and engineering applications. An iron-oxidizing bacterium, Mariprofundus ferrooxydans PV-1(T) (ATCC, BAA-1020), was cultured using a set of diffusion chambers to prepare a broad anoxic-oxic interface, upon which BIOS formation is typically observed in natural environments. Iron oxide precipitates were generated in parallel with bacterial growth. A scanning electron microscopy analysis indicated that the morphological features of the iron oxide precipitates in the medium (in vitro BIOS) were similar to those of BIOS collected from natural deep-sea hydrothermal environments in the Northwest Eifuku Seamount field in the northern Mariana Arc (in situ BIOS). Further chemical speciation of both the in vitro and in situ BIOS was examined with X-ray absorption fine structure (XAFS). A bulk XAFS analysis showed that the minerals in both BIOS were mainly ferrihydrite and oligomeric stages of amorphous iron oxyhydroxides with edge-sharing octahedral linkages. The amount of in vitro BIOS produced with the diffusion-chamber method was greater than those produced previously with other culture methods, such as gel-stabilized gradient and batch liquid culture methods. The larger yields of BIOS produced with the new culture method will allow us to clarify in the future the mineralization mechanisms during bacterial growth and to examine the physicochemical properties of BIOS, such as their adsorption to and coprecipitation with various elements and substances.

Biotic manganese oxidation coupled with methane oxidation using a continuous-flow bioreactor system under marine conditions

Biogenic manganese oxides (BioMnOx) can be applied for the effective removal and recovery of trace metals from wastewater because of their high adsorption capacity. Although a freshwater continuous-flow system for a nitrifier-based Mn-oxidizing microbial community for producing BioMnOx has been developed so far, a seawater continuous-flow bioreactor system for BioMnOx production has not been established. Here, we report BioMnOx production by a methanotroph-based microbial community by using a continuous-flow bioreactor system. The bioreactor system was operated using a deep-sea sediment sample as the inoculum with methane as the energy source for over 2 years. The BioMnOx production became evident after 370 days of reactor operation. The maximum Mn oxidation rate was 11.4 mg L-1 day-1. An X-ray diffraction analysis showed that the accumulated BioMnOx was birnessite. 16S rRNA gene-based clone analyses indicated that methanotrophic bacterial members were relatively abundant in the system; however, none of the known Mn-oxidizing bacteria were detected. A continuous-flow bioreactor system coupled with nitrification was also run in parallel for 636 days, but no BioMnOx production was observed in this bioreactor system. The comparative experiments indicated that the methanotroph-based microbial community, rather than the nitrifier-based community, was effective for BioMnOx production under the marine environmental conditions.

Spatially Resolved Distribution of Fe Species around Microbes at the Submicron Scale in Natural Bacteriogenic Iron Oxides

Natural bacteriogenic iron oxides (BIOS) were investigated using local-analyzable synchrotron-based scanning transmission X-ray microscopy (STXM) with a submicron-scale resolution. Cell, cell sheath interface (EPS), and sheath in the BIOS were clearly depicted using C-, N-, and O- near edge X-ray absorption fine structure (NEXAFS) obtained through STXM measurements. Fe-NEXAFS obtained from different regions of BIOS indicated that the most dominant iron mineral species was ferrihydrite. Fe(II)- and/or Fe(III)-acidic polysaccharides accompanied ferrihydrite near the cell and EPS regions. Our STXM/NEXAFS analysis showed that Fe species change continuously between the cell, EPS, and sheath under several 10-nm scales.