Salih Düzgün

Evaluation of apically extruded debris associated with several Ni-Ti systems.

AIM To evaluate the apical extrusion of debris associated with several root canal preparation systems in vitro. METHODOLOGY Forty-five extracted human mandibular premolars with single canals and similar lengths were used. The root canals were instrumented using ProTaper Next (Dentsply Maillefer, Ballaigues, Switzerland), Twisted File (SybronEndo, Orange, CA, USA) or WaveOne (Dentsply Maillefer, Ballaigues, Switzerland). Debris extruded apically during instrumentation was collected into pre-weighed Eppendorf tubes. The Eppendorf tubes were then stored in an incubator at 70 °C for 5 days. The Eppendorf tubes were weighed to obtain the final weight of the Eppendorf tubes plus extruded debris. Three consecutive weights were obtained for each tube. The groups were compared using the Kruskal-Wallis one-way analysis of variance on Ranks and Tukeys test. RESULTS The ProTaper Next group produced the highest mean extrusion value whilst WaveOne produced less debris compared with all the other instruments (P > 0.05). There was a significant difference between the ProTaper Next and WaveOne group (P < 0.05). CONCLUSIONS Apically extruded debris was associated with all instrumentation techniques. The WaveOne system extruded less debris compared with the Twisted File and ProTaper Next.

The effect of reciprocation versus rotational movement on the incidence of root defects during retreatment procedures.

AIM To compare the incidence of dentinal defects caused by reciprocating and rotary techniques during retreatment procedures. METHODOLOGY One hundred and twenty extracted mandibular premolars with single canals were selected. Twenty teeth were left unprepared. The root canals in the remaining 100 teeth were prepared with K-files up to size 35 and filled with Gutta-percha and AH Plus sealer using a passive cold lateral compaction technique. Twenty canals were filled and received no further treatment. Eighty teeth were divided into four groups (n = 20 in each) to undergo the removal of the root filling. In groups 1 and 2, the root filling was removed using ProTaper Retreatment files and Reciproc files, respectively, and the canals were not refilled. In groups 3 and 4, the root filling was removed using ProTaper Retreatment files and Reciproc files, respectively, and the canals were then refilled using a conventional cold lateral compaction technique. The roots were sectioned horizontally at 3, 6 and 9 mm from the root apex and observed under a stereomicroscope at 20× magnification. Defects were categorized as no defect, incomplete defect and fracture. The differences between the groups were analysed using the chi-square exact test (P = 0.05). RESULTS No defects were observed in the unprepared and filled groups, in contrast to the experimental groups. In the coronal thirds, groups 2 and 4 had more dentinal defects than groups 1 and 3 (P < 0.05). In the middle thirds, group 4 had more defects than group 1 (P < 0.05). In the apical thirds, group 2 had fewer defects than did group 3 and group 4. Also, group 3 had more defects than group 1 (P < 0.05). When comparing the experimental groups, there were no significant differences with regard to fracture (P > 0.05). CONCLUSIONS Both nickel-titanium systems were associated with dentinal defects during retreatment procedures in extracted premolar teeth.

Incidence of apical crack initiation and propagation during the removal of root canal filling material with ProTaper and Mtwo rotary nickel-titanium retreatment instruments and hand files.

INTRODUCTION The aim of this study was to determine the incidence of crack initiation and propagation in apical root dentin after retreatment procedures performed by using 2 rotary retreatment systems and hand files with additional instrumentation. METHODS Eighty extracted mandibular premolars with single canals were selected. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the control group, and no preparation was performed. The remaining 60 teeth were prepared to size 35 with rotary files and filled with gutta-percha and AH Plus sealer. Specimens were then divided into 3 groups (n = 20), and retreatment procedures were performed with the following devices and techniques: ProTaper Universal retreatment files, Mtwo retreatment files, and hand files. After retreatment, the additional instrumentation was performed by using size 40 ProTaper, Mtwo, and hand files. Digital images of the apical root surface were recorded before preparation, after instrumentation, after filling, after retreatment, and after additional instrumentation. The images were then inspected for the presence of any new apical cracks and propagation. Data were analyzed with the logistic regression and Fisher exact tests. RESULTS All experimental groups caused crack initiation and propagation after use of retreatment instruments. The ProTaper and Mtwo retreatment groups caused greater crack initiation and propagation than the hand instrument group (P < .05) after retreatment. Additional instrumentation with ProTaper and Mtwo instruments after the use of retreatment instruments caused crack initiation and propagation, whereas hand files caused neither crack initiation nor propagation (P < .05). CONCLUSIONS This study showed that retreatment procedures and additional instrumentation after the use of retreatment files may cause crack initiation and propagation in apical dentin.

Effect of glide path and apical preparation size on the incidence of apical crack during the canal preparation using Reciproc, WaveOne, and ProTaper Next systems in curved root canals: A stereomicroscope study

This study evaluated the effect of creating a glide path and apical preparation size on the incidence of apical cracks during canal preparation in mandibular molar teeth with curved canals. One hundred and forty extracted teeth were used. The teeth were randomly assigned to one control group or six experimental groups (n = 20 per group) for canal preparation. No preparation was performed on teeth in the control group. In three of the six experimental groups, a glide path was not created; a glide path was created on the curved mesial canals of all teeth in the remaining three experimental groups. All teeth in experimental groups were then instrumented with the following systems: Reciproc, WaveOne (WO), and ProTaper Next (PTN). Digital images of the apical root surfaces of these teeth were recorded before preparation, after instrumentation with size 25 files, and after instrumentation with size 40 files. The images were then inspected for the presence of any new apical cracks and propagation. There was no significant difference between the experimental groups during canal preparation using size 25 files (p > 0.05). Reciproc and WO caused more new apical cracks than did PTN during canal preparation using size 40 files (p < 0.05). However, canal preparation using size 40 files did not cause propagation of existing cracks (p > 0.05). Performing a glide path prior to canal preparation did not change the incidence of apical crack during preparation. Additionally, increasing apical preparation size may increase the incidence of apical crack during canal preparation. SCANNING 38:585-590, 2016.

The effect of various backfilling techniques on the fracture resistance of simulated immature teeth performed apical plug with Biodentine

AIM To evaluate the fracture resistance of simulated immature teeth that had been backfilled using different materials after using Biodentine as the apical plug material. DESIGN Seventy-five single-rooted teeth were divided into five groups (n = 15). The 15 teeth in group 1 served as a negative control group and received no treatment. The remaining 60 teeth were instrumented to a #6 Peeso reamer to obtain a standard internal diameter of 1.5 mm. The apical 4 mm of 60 teeth was filled with Biodentine. The backfilling was then performed on each group as follows: group 2--no backfilling (positive control), group 3--gutta-percha, group 4--fiber post, and group 5--Biodentine. Specimens were then subjected to fracture testing. The force required to fracture each specimen was recorded, and the data were statistically analyzed. RESULTS The mean fracture values of groups 1 and 4 were significantly higher than groups 2, 3, and 5 (P < 0.05). The values of groups 3 and 5 were significantly higher than group 2 (P < 0.05). CONCLUSIONS The backfilling with fiber post after an apical Biodentine plug provided the highest fracture resistance among all experimental groups.

Effectiveness of conventional syringe irrigation, vibringe, and passive ultrasonic irrigation performed with different irrigation regimes in removing triple antibiotic paste from simulated root canal irregularities

Background: This study evaluated the efficacy of a sonic device (Vibringe), passive ultrasonic irrigation (PUI), and conventional syringe irrigation (CSI) in the removal of triple antibiotic paste (TAP) from artificial standardized grooves in the apical and coronal thirds of a root canal. Materials and Methods: One-hundred eighteen root canals were prepared using the ProTaper system. The roots were split longitudinally, and a standardized groove was prepared in the apical and coronal parts of one segment. The grooves were filled with TAP, and the roots were reassembled. The roots were randomly divided into nine experimental groups and two control groups, according to the following irrigation methods: (1) CSI with sodium hypochlorite (NaOCl) + ethylenediaminetetraacetic acid (EDTA), (2) CSI/EDTA, (3) CSI/NaOCl, (4) PUI/NaOCl + EDTA, (5) PUI/EDTA, (6) PUI/NaOCl, (7) Vibringe/NaOCl + EDTA, (8) Vibringe/EDTA, and (9) Vibringe/NaOCl. The amount of remaining medicament was evaluated under a stereomicroscope. Results: In the apical third, Vibringe/NaOCl + EDTA and PUI/NaOCl + EDTA were superior to the other groups (P < 0.05); there was no significant difference between the other experimental groups (P > 0.05). In the coronal third, there was no significant difference between the experimental groups (P > 0.05). Conclusions: The use of the NaOCl/EDTA combination together with sonic or ultrasonic agitation improved the removal of TAP from the apical third.