Salim H. Al-Harthi

Microstructure and random magnetic anisotropy in Fe-Ni based nanocrystalline thin films

Nanocrystalline Fe–Ni thin films were prepared by partial crystallization of vapour deposited amorphous precursors. The microstructure was controlled by annealing the films at different temperatures. X-ray diffraction, transmission electron microscopy and energy dispersive x-ray spectroscopy investigations showed that the nanocrystalline phase was that of Fe–Ni. Grain growth was observed with an increase in the annealing temperature. X-ray photoelectron spectroscopy observations showed the presence of a native oxide layer on the surface of the films. Scanning tunnelling microscopy investigations support the biphasic nature of the nanocrystalline microstructure that consists of a crystalline phase along with an amorphous phase. Magnetic studies using a vibrating sample magnetometer show that coercivity has a strong dependence on grain size. This is attributed to the random magnetic anisotropy characteristic of the system. The observed coercivity dependence on the grain size is explained using a modified random anisotropy model.

Role of central metal ions in hematoporphyrin-functionalized titania in solar energy conversion dynamics

In this study, we have investigated the efficacy of electron transfer processes in hematoporphyrin (HP) and iron hematoporphyrin ((Fe)HP) sensitized titania as potential materials for capturing and storing solar energy. Steady-state and picosecond-resolved fluorescence studies show the efficient photoinduced electron transfer processes in hematoporphyrin-TiO2 (HP-TiO2) and Fe(III)-hematoporphyrin-TiO2 (Fe(III)HP-TiO2) nanohybrids, which reveal the role of central metal ions in electron transfer processes. The bidentate covalent attachment of HP onto TiO2 particulates is confirmed by FTIR, Raman scattering and X-ray photoelectron spectroscopy (XPS) studies. The iron oxidation states and the attachment of iron to porphyrin through pyrrole nitrogen atoms were investigated by cyclic voltammetry and FTIR studies, respectively. We also investigated the potential application of HP-TiO2 and Fe(III)HP-TiO2 nanohybrids for the photodegradation of a model organic pollutant methylene blue (MB) in aqueous solution under wavelength dependent light irradiation. To further investigate the role of iron oxidation states in electron transfer processes, photocurrent measurements were done by using Fe(III) and Fe(II) ions in porphyrin. This work demonstrates the role of central metal ions in fundamental electron transfer processes in porphyrin sensitized titania and their implications for dye-sensitized device performance.

Unusual surface and edge morphologies, sp2 to sp3 hybridized transformation and electronic damage after Ar+ ion irradiation of few-layer graphene surfaces.

Roughness and defects induced on few-layer graphene (FLG) irradiated by Ar+ ions at different energies were investigated using X-ray photoemission spectroscopy (XPS) and atomic force microscopy techniques. The results provide direct experimental evidence of ripple formation, sp2 to sp3 hybridized carbon transformation, electronic damage, Ar+ implantation, unusual defects and edge reconstructions in FLG, which depend on the irradiation energy. In addition, shadowing effects similar to those found in oblique-angle growth of thin films were seen. Reliable quantification of the transition from the sp2-bonding to sp3-hybridized state as a result of Ar+ ion irradiation is achieved from the deconvolution of the XPS C (1s) peak. Although the ion irradiation effect is demonstrated through the shape of the derivative of the Auger transition C KVV spectra, we show that the D parameter values obtained from these spectra which are normally used in the literature fail to account for the sp2 to sp3 hybridization transition. In contrast to what is known, it is revealed that using ion irradiation at large FLG sample tilt angles can lead to edge reconstructions. Furthermore, FLG irradiation by low energy of 0.25 keV can be a plausible way of peeling graphene layers without the need of Joule heating reported previously.

Colossal thermoelectric power in charge ordered lanthanum calcium manganites (La0.5Ca0.5MnO3)

Lanthanum calcium manganites (La0.5Ca0.5MnO3) with a composition close to charge ordering, synthesized by high energy ball milling, was found to exhibit colossal thermoelectric power. Thermoelectric power (TEP) data was systematically analyzed by dividing the entire temperature range (5 K–300 K) into three different regimes to explore different scattering mechanisms involved. Mandals model has been applied to explain TEP data in the region below the Curie temperature (TC). It has been found that the variation of thermoelectric power with temperature is pronounced when the system enters the charge ordered region at T < 200 K. For temperatures lower than 120 K, due to the co-existence of charge ordered state with a spin-glass state, the variation of thermoelectric power is maximum and exhibited a peak value of −80 mV/K at 58 K. This has been explained by incorporating Kondo properties of the spin-glass along with magnon scattering. FC-ZFC magnetization measurements indicate the existence of a glassy state ...

Surface evolution of amorphous nanocolumns of Fe-Ni grown by oblique angle deposition

The growth of Fe–Ni based amorphous nanocolumns has been studied using atomic force microscopy. The root mean square roughness of the film surface increased with the deposition time but showed a little change at higher deposition time. It was found that the separation between the nanostructures increased sharply during the initial stages of growth and the change was less pronounced at higher deposition time. During the initial stages of the column growth, a roughening process due to self shadowing is dominant and, as the deposition time increases, a smoothening mechanism takes place due to the surface diffusion of adatoms.

Evolution of surface morphology and electronic structure of few layer graphene after low energy Ar+ ion irradiation

We report on co-existing dual anisotropy ripple formation, sp bonding transformation, and variation in the delocalized π electron system in 1 keV Ar+ ion irradiated few-layer graphene surfaces. Ripples in directions, perpendicular and parallel to the ion beam were found. The irradiation effect and the transition from the sp2-bonding to sp3-hybridized state were analyzed from the deconvolution of the C (1s) peak and from the shape of the derivative of the Auger transition spectra. The results suggest a plausible mechanism for tailoring of few-layer graphene electronic band structure with interlayer coupling tuned by the ion irradiation.

Structural properties, magnetic interactions, magnetocaloric effect and critical behaviour of cobalt doped La0.7Te0.3MnO3

The effect of cobalt doping on the structural, magnetic and magnetocaloric properties of electron-doped manganite La0.7Te0.3Mn1−xCoxO3 (x = 0, 0.1, 0.2, 0.25, 0.3 and 0.5) has been investigated. The parent compound La0.7Te0.3MnO3 crystallizes in a rhombohedral structure with Rc space group. With the increase in Co concentration to x = 0.2, a structural transition from rhombohedral (Rc space group) to orthorhombic (Pbnm space group) is observed. X-ray photoelectron spectroscopy (XPS) indicates that the structural transition is due to the disordered distribution of Mn2+/Mn3+ and Co2+/Co3+ ions. All the samples undergo a paramagnetic–ferromagnetic (PM–FM) phase transition. With the increase in Co content to x = 0.1, the unit cell volume increases with a decrease in both Mn–O–Mn bond angle and Tc indicating a weakening of the double exchange interaction. However, with further increase in Co concentration, Tc increases. The presence of competing ferromagnetic and antiferromagnetic interactions leads to a glassy behaviour at low temperatures for low Co doping concentrations. However, for higher Co concentrations, no such behaviour is observed. Arrott plots reveal a second order nature of magnetic transition for all the samples. The magnetic exchange interactions for x = 0.3 and 0.5 follow the mean-field model. Magnetization results show that the magnetocaloric property of the electron-doped manganite is affected by the substitution of Co at Mn sites. Relatively large values of relative cooling power and broad temperature interval of the magnetocaloric effect make the present compounds promising for sub-room temperature magnetic refrigeration applications.

Self-organization of gold nanoparticles on silanated surfaces

Summary The self-organization of monolayer gold nanoparticles (AuNPs) on 3-aminopropyltriethoxysilane (APTES)-functionalized glass substrate is reported. The orientation of APTES molecules on glass substrates plays an important role in the interaction between AuNPs and APTES molecules on the glass substrates. Different orientations of APTES affect the self-organization of AuNps on APTES-functionalized glass substrates. The as grown monolayers and films annealed in ultrahigh vacuum and air (600 °C) were studied by water contact angle measurements, atomic force microscopy, X-ray photoelectron spectroscopy, UV–visible spectroscopy and ultraviolet photoelectron spectroscopy. Results of this study are fundamentally important and also can be applied for designing and modelling of surface plasmon resonance based sensor applications.

Influence of substrate topography on the growth and magnetic properties of obliquely deposited amorphous nanocolumns of Fe-Ni

We investigated the influence of substrate surface roughness on the structural and magnetic properties of obliquely deposited amorphous nanocolumns of Fe–Ni. Experiments showed that the surface roughness of the substrate greatly determines the morphology of the columnar structures and this in turn has a profound influence on the magnetic properties. Nucleation of Fe–Ni nanocolumns on a smooth silicon substrate was at random, while that on a rough glass substrate was defined by the irregularities on the substrate surface. It has been found that magnetic interaction between the nanocolumns prepared on a silicon substrate was due to their small inter-column separation. Well separated nanocolumns on a glass substrate resulted in exchange isolated magnetic domains. The size, shape and the distribution of nanocolumns can be tailored by appropriately choosing the surface roughness of the substrate. This will find potential applications in thin film magnetism.

Exchange bias effect in partially oxidized amorphous Fe–Ni–B based metallic glass nanostructures

The magnetic properties of amorphous Fe-Ni-B based metallic glass nanostructures were investigated. The nanostructures underwent a spin-glass transition at temperatures below 100 K and revealed an irreversible temperature following the linear de Almeida-Thouless dependence. When the nanostructures were cooled below 25 K in a magnetic field, they exhibited an exchange bias effect with enhanced coercivity. The observed onset of exchange bias is associated with the coexistence of the spin-glass phase along with the appearance of another spin-glass phase formed by oxidation of the structurally disordered surface layer, displaying a distinct training effect and cooling field dependence. The latter showed a maximum in exchange bias field and coercivity, which is probably due to competing multiple equivalent spin configurations at the boundary between the two spin-glass phases.