Salvatore Almaviva

Hard x-ray contact microscopy with 250nm spatial resolution using a LiF film detector and a tabletop microsource

An innovative route for deep-submicrometer spatial resolution hard x-ray microscopy with tabletop x-ray source is proposed. A film of lithium fluoride (LiF) was used as imaging detector in contact mode. We present here the x-ray images recorded on LiF films of a Fresnel zone plate with submicrometer gold structures and of an onion cataphyll. The images were read with an optical confocal microscope in fluorescence mode. The measured spatial resolution was about 250nm, i.e., close to the resolution limit of the confocal microscope. The advantages and drawbacks, and the possible improvements, of this route are discussed.

Permanent luminescent micropatterns photoinduced by low-power ultraviolet irradiation in lithium fluoride

The permanent recording of regularly spaced, periodic, light-emitting submicrometric structures in gamma-ray irradiated LiF crystals has been obtained by low-power illumination with a continuous laser at 244nm in a standard phase mask interferometer used for Bragg gratings registration in optical fibers. Selective bleaching of primary F electronic defects and aggregate F2 laser active color centers has been identified as the mechanism responsible of photoinduced spatial modulation of absorption and photoemission properties. The results look promising for the realization of micropatterns with refractive index and gain modulation on scale comparable with the optical wavelengths to easily integrate with miniaturized LiF-based structures.

Measurements of deuterium retention and surface elemental composition with double pulse laser induced breakdown spectroscopy

15th International Conference on Plasma-Facing Materials and Components for Fusion Applications, PFMC 2015

Photo-induced gratings in thin color center layers on lithium fluoride

We study the recording of permanent Bragg gratings on surface-colored lithium fluoride (LiF) crystals by using the interference pattern of a continuous-wave UV argon-ion laser operating at 244 nm. Gratings with spatial periodicity ranging from 400 to 1000 nm are written by using a phase-mask interferometer and are stable for several months after the writing process. Absorption and photoluminescence spectra show the bleaching of primary F and F -aggregate laser-active color centers as a result of the process. Confocal microscopy is used to determine the pitch and the profile of the fluorescent gratings. The UV laser-induced optical bleaching in highly colored LiF ultrathin layers is responsible for the periodic spatial modulation of absorption and photoemission properties that characterize the gratings. In the colored surface layer, a reduction of as much as 50% of the initial color-center-induced refractive-index increase has been estimated in the bleached areas.

A new eye-safe UV Raman spectrometer for the remote detection of energetic materials in fingerprint concentrations: Characterization by PCA and ROC analyzes.

We report the results of proximal Raman investigations at a distance of 7 m, to detect traces of explosives (from 0.1 to 0.8 mg/cm(2)) on common clothes with a new eye-safe apparatus. The instrument excites the target with a single laser shot of few ns (10(-9)s) in the UV range (laser wavelength 266 nm) detecting energetic materials like Pentaerythritol tetranitrate (PETN), Trinitrotoluene (TNT), Urea Nitrate (UN) and Ammonium Nitrate (AN). Samples were prepared using a piezoelectric-controlled plotter device to realize well-calibrated amounts of explosives on several cm(2). Common fabrics and tissues such as polyester, polyamide and leather were used as substrates, representative of base-materials used in the production of jackets or coats. Other samples were prepared by touching the substrate with a silicon finger contaminated with explosives, to simulate a spot left by contaminated hands on a jacket or bag during the preparation of an improvised explosive device (IED) by a terrorist. The observed Raman signals showed some peculiar molecular bands of the analyzed compounds, allowing us to identify and discriminate them with high sensitivity and selectivity, also in presence of the interfering signal from the underlying fabric. A dedicated algorithm was developed to remove noise and fluorescence background from the single laser shot spectra and an automatic spectral recognition procedure was also implemented, evaluating the intensity of the characteristic Raman bands of each explosive and allowing their automatic classification. Principal component analysis (PCA) was used to show the discrimination potentialities of the apparatus on different sets of explosives and to highlight possible criticalities in the detection. Receiver operating characteristic (ROC) curves were used to discuss and quantify the sensitivity and the selectivity of the proposed recognition procedure. To our knowledge the developed device is at the highest sensitivity nowadays achievable in the field of eye-safe, Raman devices for proximal detection.

Contact X-ray microscopy of living cells by using LiF crystal as imaging detector.

In this paper, the use of lithium fluoride (LiF) as imaging radiation detector to analyse living cells by single‐shot soft X‐ray contact microscopy is presented. High resolved X‐ray images on LiF of cyanobacterium Leptolyngbya VRUC135, two unicellular microalgae of the genus Chlamydomonas and mouse macrophage cells (line RAW 264.7) have been obtained utilizing X‐ray radiation in the water window energy range from a laser plasma source. The used method is based on loading of the samples, the cell suspension, in a special holder where they are in close contact with a LiF crystal solid‐state X‐ray imaging detector. After exposure and sample removal, the images stored in LiF by the soft X‐ray contact microscopy technique are read by an optical microscope in fluorescence mode. The clear image of the mucilaginous sheath the structure of the filamentous Leptolyngbya and the visible nucleolus in the macrophage cells image, are noteworthiness results. The peculiarities of the used X‐ray radiation and of the LiF imaging detector allow obtaining images in absorption contrast revealing the internal structures of the investigated samples at high spatial resolution. Moreover, the wide dynamic range of the LiF imaging detector contributes to obtain high‐quality images. In particular, we demonstrate that this peculiar characteristic of LiF detector allows enhancing the contrast and reveal details even when they were obscured by a nonuniform stray light.

Proximal detection of traces of energetic materials with an eye-safe UV raman prototype developed for civil applications

A new Raman-based apparatus for proximal detection of energetic materials on people, was developed and tested for the first time. All the optical and optoelectronics components of the apparatus, as well as their optical matching, were carefully chosen and designed to respect international eye-safety regulations. In this way, the apparatus is suitable for civil applications on people in public areas such as airports and metro or railway stations. The acquisition software performs the data analysis in real-time to provide a fast response to the operator. Moreover, it allows for deployment of the apparatus either as a stand alone device or as part of a more sophisticated warning system architecture made up of several sensors. Using polyamide as substrate, the apparatus was able to detect surface densities of ammonium nitrate (AN), 2-methyl-1,3,5-trinitrobenzene (TNT), 3-nitrooxy-2,2-bis(nitrooxymethyl)propyl] nitrate (PETN) and urea nitrate (UN) in the range of 100–1000 μg/cm2 at a distance of 6.4 m using each time a single laser pulse of 3 mJ/cm2. The limit of detection calculated for AN is 289 μg/cm2. AN and UN provided the highest percentages of true positives (>82% for surface densities of 100–400 μg/cm2 and fingerprints) followed by TNT and PETN (17%–70% for surface densities of 400–1000 μg/cm2 and fingerprints).

Application of micro-Raman spectroscopy for fight against terrorism and smuggling

Abstract. We report the results of Raman measurements on some common military explosives and explosives precursors deposited on clothing fabrics, both synthetic and natural, in concentration comparable to those obtained from a single fingerprint or mixed with similar harmless substances to detect illegal compounds for smuggling activities. Raman spectra were obtained using an integrated portable Raman system equipped with an optical microscope and a 785-nm laser in an analysis of <1  min. The spectral features of each illicit substance have been identified and distinguished from those belonging to the substrate fabric or from the interfering compound. Our results show that the application of Raman spectroscopy (RS) with a microscope-based portable apparatus can provide interpretable Raman spectra for a fast, in-situ analysis, directly from explosive particles of some μm3, despite the contribution of the substrate, leaving the sample completely unaltered for further, more specific, and propedeutic laboratory analysis. We also show how the RS is suitable for detecting illegal compounds mixed with harmless substances for smuggling purposes or for counterfeiting activities.

Raman spectroscopy for the detection of explosives and their precursors on clothing in fingerprint concentration: a reliable technique for security and counterterrorism issues

In this work we report the results of RS measurements on some common military explosives and some of the most common explosives precursors deposited on clothing fabrics, both synthetic and natural, such as polyester, leather and denim cotton at concentration comparable to those obtained from a single fingerprint. RS Spectra were obtained using an integrated portable Raman system equipped with an optical microscope, focusing the light of a solid state GaAlAs laser emitting at 785 nm. A maximum exposure time of 10 s was used, focusing the beam in a 45 μm diameter spot on the sample. The substances were deposited starting from commercial solutions with a Micropipetting Nano-Plotter, ideal for generating high-quality spots by non-contact dispensing of sub-nanoliter volumes of liquids, in order to simulate a homogeneous stain on the fabric surface. Images acquired with a Confocal Laser Scanning Microscope provided further details of the deposition process showing single particles of micrometric volume trapped or deposited on the underlying tissues. The spectral features of each substance was clearly identified and discriminated from those belonging to the substrate fabric or from the surrounding fluorescence. Our results show that the application of RS using a microscope-based apparatus can provide interpretable Raman spectra in a fast, in-situ analysis, directly from explosive particles of some μm3 as the ones that it could be found in a single fingerprint, despite the contribution of the substrate, leaving the sample completely unaltered for further, more specific and propaedeutic laboratory analysis. The same approach can be envisaged for the detection of other illicit substances like drugs.

X-ray microscopy of plant cells by using LiF crystal as a detector

A lithium fluoride (LiF) crystal has been utilized as a new soft X‐ray detector to image different biological samples at a high spatial resolution. This new type of image detector for X‐ray microscopy has many interesting properties: high resolution (nanometer scale), permanent storage of images, the ability to clear the image and reuse the LiF crystal, and high contrast with greater dynamic range. Cells of the unicellular green algae Chlamydomonas dysosmos and Chlorella sorokiniana, and pollen grains of Olea europea have been used as biological materials for imaging. The biological samples were imaged on LiF crystals by using the soft X‐ray contact microscopy and contact micro‐radiography techniques. The laser plasma soft X‐ray source was generated using a Nd:YAG/Glass laser focused on a solid target. The X‐ray energy range for image acquisition was in the water‐window spectral range for single shot contact microscopy of very thin biological samples (single cells) and around 1 keV for multishots microradiography. The main aim of this article is to highlight the possibility of using a LiF crystal as a detector for the biological imaging using soft X‐ray radiation and to demonstrate its ability to visualize the microstructure within living cells. Microsc. Res. Tech., 2008.