Sandor Balog

Avoiding drying-artifacts in transmission electron microscopy: Characterizing the size and colloidal state of nanoparticles

Standard transmission electron microscopy nanoparticle sample preparation generally requires the complete removal of the suspending liquid. Drying often introduces artifacts, which can obscure the state of the dispersion prior to drying and preclude automated image analysis typically used to obtain number-weighted particle size distribution. Here we present a straightforward protocol for prevention of the onset of drying artifacts, thereby allowing the preservation of in-situ colloidal features of nanoparticles during TEM sample preparation. This is achieved by adding a suitable macromolecular agent to the suspension. Both research- and economically-relevant particles with high polydispersity and/or shape anisotropy are easily characterized following our approach (http://bsa.bionanomaterials.ch), which allows for rapid and quantitative classification in terms of dimensionality and size: features that are major targets of European Union recommendations and legislation.

Local infiltration of planar photonic crystals with UV-curable polymers

We present the local polymer infiltration of planar photonic crystal cavities via a maskless laser-writing technique. After the infiltration of the air holes with a UV-curable monomer a focused laser is used to locally polymerize the monomer in selected holes at the cavity boundaries. We show that cavity modes with different symmetries can be differently tuned depending on the size and the position of the infiltrated region around the cavity.

Size-dependent accumulation of particles in lysosomes modulates dendritic cell function through impaired antigen degradation.

Introduction Nanosized particles may enable therapeutic modulation of immune responses by targeting dendritic cell (DC) networks in accessible organs such as the lung. To date, however, the effects of nanoparticles on DC function and downstream immune responses remain poorly understood. Methods Bone marrow–derived DCs (BMDCs) were exposed in vitro to 20 or 1,000 nm polystyrene (PS) particles. Particle uptake kinetics, cell surface marker expression, soluble protein antigen uptake and degradation, as well as in vitro CD4+ T-cell proliferation and cytokine production were analyzed by flow cytometry. In addition, co-localization of particles within the lysosomal compartment, lysosomal permeability, and endoplasmic reticulum stress were analyzed. Results The frequency of PS particle–positive CD11c+/CD11b+ BMDCs reached an early plateau after 20 minutes and was significantly higher for 20 nm than for 1,000 nm PS particles at all time-points analyzed. PS particles did not alter cell viability or modify expression of the surface markers CD11b, CD11c, MHC class II, CD40, and CD86. Although particle exposure did not modulate antigen uptake, 20 nm PS particles decreased the capacity of BMDCs to degrade soluble antigen, without affecting their ability to induce antigen-specific CD4+ T-cell proliferation. Co-localization studies between PS particles and lysosomes using laser scanning confocal microscopy detected a significantly higher frequency of co-localized 20 nm particles as compared with their 1,000 nm counterparts. Neither size of PS particle caused lysosomal leakage, expression of endoplasmic reticulum stress gene markers, or changes in cytokines profiles. Conclusion These data indicate that although supposedly inert PS nanoparticles did not induce DC activation or alteration in CD4+ T-cell stimulating capacity, 20 nm (but not 1,000 nm) PS particles may reduce antigen degradation through interference in the lysosomal compartment. These findings emphasize the importance of performing in-depth analysis of DC function when developing novel approaches for immune modulation with nanoparticles.

Mimicking exposures to acute and lifetime concentrations of inhaled silver nanoparticles by two different in vitro approaches

Summary In the emerging market of nano-sized products, silver nanoparticles (Ag NPs) are widely used due to their antimicrobial properties. Human interaction with Ag NPs can occur through the lung, skin, gastrointestinal tract, and bloodstream. However, the inhalation of Ag NP aerosols is a primary concern. To study the possible effects of inhaled Ag NPs, an in vitro triple cell co-culture model of the human alveolar/airway barrier (A549 epithelial cells, human peripheral blood monocyte derived dendritic and macrophage cells) together with an air–liquid interface cell exposure (ALICE) system was used in order to reflect a real-life exposure scenario. Cells were exposed at the air–liquid interface (ALI) to 0.03, 0.3, and 3 µg Ag/cm2 of Ag NPs (diameter 100 nm; coated with polyvinylpyrrolidone: PVP). Ag NPs were found to be highly aggregated within ALI exposed cells with no impairment of cell morphology. Furthermore, a significant increase in release of cytotoxic (LDH), oxidative stress (SOD-1, HMOX-1) or pro-inflammatory markers (TNF-α, IL-8) was absent. As a comparison, cells were exposed to Ag NPs in submerged conditions to 10, 20, and 30 µg Ag/mL. The deposited dose per surface area was estimated by using a dosimetry model (ISDD) to directly compare submerged vs ALI exposure concentrations after 4 and 24 h. Unlike ALI exposures, the two highest concentrations under submerged conditions promoted a cytotoxic and pro-inflammatory response after 24 h. Interestingly, when cell cultures were co-incubated with lipopolysaccharide (LPS), no synergistic inflammatory effects were observed. By using two different exposure scenarios it has been shown that the ALI as well as the suspension conditions for the lower concentrations after 4 h, reflecting real-life concentrations of an acute 24 h exposure, did not induce any adverse effects in a complex 3D model mimicking the human alveolar/airway barrier. However, the highest concentrations used in the ALI setup, as well as all concentrations under submerged conditions after 24 h, reflecting more of a chronic lifetime exposure concentration, showed cytotoxic as well as pro-inflammatory effects. In conclusion, more studies need to address long-term and chronic Ag NP exposure effects.

Structural transitions induced by shear flow and temperature variation in a nonionic surfactant/water system

In this study, we investigate structural transitions of tetraethylene glycol monohexadecyl ether (C(16)E(4)) in D(2)O as a function of shear flow and temperature. Via a combination of rheology, rheo-small-angle neutron scattering and rheo-small-angle light scattering, we probe the structural evolution of the system with respect to shear and temperature. Multi-lamellar vesicles, planar lamellae, and a sponge phase were found to compete as a function of shear rate and temperature, with the sponge phase involving the formation of a new transient lamellar phase with a larger spacing, coexisting with the preceding lamellar phase within a narrow temperature-time range. The shear flow behavior of C(16)E(4) is also found to deviate from other nonionic surfactants with shorter alkyl chains (C(10)E(3) and C(12)E(4)), resembling to the C(16)E(7) case, of longer chain.

A toolbox of oligopeptide-modified polymers for tailored elastomers

Biomaterials are constructed from limited sets of building blocks but exhibit extraordinary and versatile properties, because hierarchical structure formation lets them employ identical supramolecular motifs for different purposes. Here we exert a similar degree of structural control in synthetic supramolecular elastomers and thus tailor them for a broad range of thermomechanical properties. We show that oligopeptide-terminated polymers selectively self-assemble into small aggregates or nanofibrils, depending on the length of the oligopeptides. This process is self-sorting if differently long oligopeptides are combined so that different nanostructures coexist in bulk mixtures. Blends of polymers with oligopeptides matching in length furnish reinforced elastomers that exhibit shear moduli one order of magnitude higher than the parent polymers. By contrast, novel interpenetrating supramolecular networks that display excellent vibration damping properties are obtained from blends comprising non-matching oligopeptides or unmodified polymers. Hence, blends of oligopeptide-modified polymers constitute a toolbox for tailored elastomers with versatile properties.

Luminescent nanoparticles with lanthanide-containing poly(ethylene glycol)-Poly(ε-caprolactone) block copolymers.

Lanthanide-containing nanoparticles have attracted much attention due to their unique optical properties and potential in nanotechnological applications. An amphiphilic block copolymer of poly(ethylene glycol)-b-poly(ε-caprolactone) methyl ether (mPEG-PCL) was functionalized with a dipicolinic acid (dpa) moiety and coordinated to lanthanide ions to afford [Ln(dpa-PCL-PEG-OCH3)3](HNEt3)3 (Ln = Eu(3+), Tb(3+)). Micelle-like nanoparticles of dpa-PCL-PEG-OCH3 macroligand and metal-centered polymers were prepared by solvent displacement methods. Dynamic light scattering analysis (DLS) and cryogenic transmission electron microscopy images confirmed the presence of solid sphere (<47 nm in diameter) and vesicle (>47 nm in diameter) morphologies. The viability and stability of the lanthanide complexes in micelle-like nanoparticles was explored by DLS and luminescence spectroscopy, and found to be stable for several weeks.

Vesicle Origami: Cuboid Phospholipid Vesicles Formed by Template-Free Self-Assembly

Phospholipid liposomes are archetypical self-assembled structures. To minimize the surface tension, the vesicles typically are spherical. Deciphering the bilayer code, the basic physical interactions between phospholipids would allow these molecules to be utilized as building blocks for novel, non-spherical structures. A 1,2-diamidophospholipid is presented that self-assembles into a cuboid structure. Owing to intermolecular hydrogen bonding, the bilayer membranes form an exceptionally tight subgel packing, leading to a maximization of flat structural elements and a minimization of any edges. These conditions are optimized in the geometrical structure of a cube. Surprisingly, the lateral surface pressure in the membrane is only one third of the value typically assumed for a bilayer membrane, questioning a long-standing rule-of-thumb.

Plasmonic nanoparticles and their characterization in physiological fluids.

Nanoparticles possess unique properties beyond that of classical materials, and while these properties can be used for designing a dedicated functionality, they may also pose a problem to living organisms, to human health and the environment. The specific primary routes by which nanoparticles may interact with the human body include inhalation, injection, ingestion and application to the skin. Independent of the entry route, the particles inevitably encounter a complex physiological fluid populated with e.g. proteins, vitamins, lipids and salts/ions. Different consequences of such an encounter may include formation of a surface-bound protein layer, particle dissolution or aggregation, which are expected to have a crucial impact on cellular interaction. Understanding cellular responses to nanoparticle interactions starts with understanding particle behavior in physiological fluids. Nanoparticles are now available in practically any size, shape and functionalization, to promote distinct optical, magnetic, and physico-chemical properties, making the prediction of their behavior, in physiological fluids, not a trivial task. Characterization has therefore become of paramount importance. In this review, we give an overview about the diversity of physiological fluids as well as present an inventory of the most relevant experimental techniques used to study plasmonic nanoparticles.

Single‐Component Upconverting Polymeric Nanoparticles

Low-power light upconversion is a highly desirable feature for a broad range of applications and new materials enabling this process are sought in both bulk and particulate form. Here, the preparation of upconverting nanoparticles is reported from a methacrylic terpolymer bearing diphenylanthracene and meso-phenoxytris(heptyl)porphyrin pendant groups by a microemulsion technique. The use of a terpolymer in which the upconvering dye molecules are covalently attached mitigates some of the drawbacks of triplet-triplet annihilation upconverting nanoparticles made by other techniques, in particular dye leakage from the nanoparticles, and limited control of the sensitizer and emitter concentration within each nanoparticle. Size and morphology of the new upconverting nanoparticles are investigated by dynamic light scattering and transmission electron microscopy and elucidated their upconverting properties by luminescence spectroscopy.