Sándor Valkai

Integrated optical motor.

A light-driven micrometer-sized mechanical motor is created by laser-light-induced two-photon photopolymerization. All necessary components of the engine are built upon a glass surface by an identical procedure and include the following: a rigid mechanical framework, a rotor freely rotating on an axis, and an integrated optical waveguide carrying the actuating light to the rotor. The resulting product is a most practical stand-alone system. The light introduced into the integrated optical waveguide input of the motor provides the driving force: neither optical tweezers or even a microscope are needed for the function. The power and efficiency of the motor are evaluated. The independent unit is expected to become an important component of more complex integrated lab-on-a-chip devices.

Parallel photopolymerisation with complex light patterns generated by diffractive optical elements

Photopolymerisation by scanning a focused laser beam is a powerful method to build structures of arbitrary complexity with submicrometer resolution. We introduce parallel photopolymerisation to enhance the efficiency. Instead of multidimensional scanning of a single focus, the structure is generated simultaneously with diffractive patterns. We used fixed diffractive optical elements (DOEs), kinoforms, and Spatial Light Modulators (SLMs). The possibilities of photopolymerisation using SLM were investigated: the added flexibility using the programmable device is demonstrated. By using these DOEs, straight and helical cross shaped columns were produced with a single scan at a rate about an order of magnitude faster than by simple scanning. The produced helical structures could be rotated by optical tweezers.

Integrated Optical Switching Based on the Protein Bacteriorhodopsin

The feasibility of a picosecond photonic switch based on light-induced reaction of the chromoprotein bacteriorhodopsin has been experimentally studied. A possible future utilization of this switch could support an all-optical data transfer at Tbit/s rate.

Optical tweezers with tips grown at the end of fibers by photopolymerization.

We present a method to build an optical tip at the end of a single-mode optical fiber. The tip is grown by a self-writing process: photopolymerization by the light coming from the optical fiber. We developed a technique to produce a flat end surface on the tip. The good optical quality of the tip and the output laser beam was demonstrated by the fact that a counterpropagating optical trap could be constructed by using the tips with parameters comparable to regular fiber traps. Because of the small size of the tips, the tweezers require a much smaller space than regular fiber traps.

Stretching of red blood cells using an electro-optics trap

The stretching stiffness of Red Blood Cells (RBCs) was investigated using a combination of an AC dielectrophoretic apparatus and a single-beam optical tweezer. The experiments were performed at 10 MHz, a frequency high enough to avoid conductivity losses, but below the second turnover point between positive and negative dielectrophoresis. By measuring the geometrical parameters of single healthy human RBCs as a function of the applied voltage, the elastic modulus of RBCs was determined (µ = 1.80 ± 0.5 µN/m) and compared with similar values of the literature got by other techniques. The method is expected to be an easy-to-use, alternative tool to determine the mechano-elastic properties of living cells, and, on this basis, to distinguish healthy and diseased cells.

High-speed integrated optical logic based on the protein bacteriorhodopsin

The principle of all-optical logical operations utilizing the unique nonlinear optical properties of a protein was demonstrated by a logic gate constructed from an integrated optical Mach-Zehnder interferometer as a passive structure, covered by a bacteriorhodopsin (bR) adlayer as the active element. Logical operations were based on a reversible change of the refractive index of the bR adlayer over one or both arms of the interferometer. Depending on the operating point of the interferometer, we demonstrated binary and ternary logical modes of operation. Using an ultrafast transition of the bR photocycle (BR-K), we achieved high-speed (nanosecond) logical switching. This is the fastest operation of a protein-based integrated optical logic gate that has been demonstrated so far. The results are expected to have important implications for finding novel, alternative solutions in all-optical data processing research.

Microfluidic study of the chemotactic response of Escherichia coli to amino acids, signaling molecules and secondary metabolites

Quorum sensing and chemotaxis both affect bacterial behavior on the population level. Chemotaxis shapes the spatial distribution of cells, while quorum sensing realizes a cell-density dependent gene regulation. An interesting question is if these mechanisms interact on some level: Does quorum sensing, a density dependent process, affect cell density itself via chemotaxis? Since quorum sensing often spans across species, such a feedback mechanism may also exist between multiple species. We constructed a microfluidic platform to study these questions. A flow-free, stable linear chemical gradient is formed in our device within a few minutes that makes it suitable for sensitive testing of chemoeffectors: we showed that the amino acid lysine is a weak chemoattractant for Escherichia coli, while arginine is neutral. We studied the effect of quorum sensing signal molecules of Pseudomonas aeruginosa on E. coli chemotaxis. Our results show that N-(3-oxododecanoyl)-homoserine lactone (oxo-C12-HSL) and N-(butryl)-homoserine lactone (C4-HSL) are attractants. Furthermore, we tested the chemoeffector potential of pyocyanin and pyoverdine, secondary metabolites under a quorum sensing control. Pyocyanin is proved to be a weak attractant while pyoverdine are repellent. We demonstrated the usability of the device in co-culturing experiments, where we showed that various factors released by P. aeruginosa affect the dynamic spatial rearrangement of a neighboring E. coli population, while surface adhesion of the cells is also modulated.

Interaction of Bacterial Populations in Coupled Microchambers

When culturing bacteria in artificial microhabi-tats, such as in microfluidic devices, microcham-bers and microreactors, the ecological and microbi-ological aspects must be considered. In such devices and experiments cells often live in structured envi-ronments that from an ecological viewpoint could be considered “patchy” (i.e. with strong spatial het-erogeneities and variations in suitability for the cells).

An all optical microfluidic sorter.

We present a microfluidic cell sorter that is able to count, characterize and sort micrometer sized particles and cells. In addition to optical counting and characterization, also sorting is performed by optical forces. The device is optimized for simplicity. The microfluidic channels and optical waveguides that carry the illuminating, detecting and sorting light form a single integrated structure, all built from the same material in a single photopolymerization step.

Integrated optical devices using bacteriorhodopsin as active nonlinear optical material

Coupling of optical data-processing devices with microelectronics, telecocommunication and sensory functions, is among the biggest challenges in molecular electronics. Intensive research is going on to find suitable nonlinear optical materials that could meet the demanding requirements of optoelectronic applications, especially regarding high sensitivity and stability. In addition to inorganic and organic crystals, biological molecules have also been considered for use in integrated optics, among which the bacterial chromoprotein, bacteriorhodopsin (bR) generated the most interest. bR undergoes enormous absorption and concomitant refractive index changes upon initiation of a cyclic series of photoreactions by a burst of actinic light. This effect can be exploited to create highly versatile all-optical logical elements. We demonstrate the potential of this approach by investigating the static and dynamic response of several basic elements of integrated optical devices. Our results show that, due to its relatively high refractive index changes, bR can be used as an active nonlinear optical material to produce a variety of integrated optical switching and modulation effects.