Sandra J. Shefelbine

BoneJ: Free and extensible bone image analysis in ImageJ

Bone geometry is commonly measured on computed tomographic (CT) and X-ray microtomographic (μCT) images. We obtained hundreds of CT, μCT and synchrotron μCT images of bones from diverse species that needed to be analysed remote from scanning hardware, but found that available software solutions were expensive, inflexible or methodologically opaque. We implemented standard bone measurements in a novel ImageJ plugin, BoneJ, with which we analysed trabecular bone, whole bones and osteocyte lacunae. BoneJ is open source and free for anyone to download, use, modify and distribute.

Using digital image correlation to determine bone surface strains during loading and after adaptation of the mouse tibia

Previous models of cortical bone adaptation, in which loading is imposed on the bone, have estimated the strains in the tissue using strain gauges, analytical beam theory, or finite element analysis. We used digital image correlation (DIC), tracing a speckle pattern on the surface of the bone during loading, to determine surface strains in a murine tibia during compressive loading through the knee joint. We examined whether these surface strains in the mouse tibia are modified following two weeks of load-induced adaptation by comparison with contralateral controls. Results indicated non-uniform strain patterns with isolated areas of high strain (0.5%), particularly on the medial side. Strain measurements were reproducible (standard deviation of the error 0.03%), similar between specimens, and in agreement with strain gauge measurements (between 0.1 and 0.2% strain). After structural adaptation, strains were more uniform across the tibial surface, particularly on the medial side where peak strains were reduced from 0.5% to 0.3%. Because DIC determines local strains over the entire surface, it will provide a better understanding of how strain stimulus influences the bone response during adaptation.

Characterizing a novel and adjustable noninvasive murine joint loading model

OBJECTIVEnMechanical loading through a mechano-adaptive response modifies articular cartilage structure and contributes to osteoarthritis (OA). However, the specific mechanical stimuli involved in joint health and disease remain poorly defined, partly due to a lack of in vivo models of controlled loading. The present study was undertaken to develop and characterize a novel nonsurgical murine model in which applied loads to the knee joint are highly adjustable.nnnMETHODSnAnimals experienced normal locomotion, except during loading. Loads were applied to the right knees of 8-week-old CBA mice, 3 times a week for 2 weeks (and assessed immediately or after 3 weeks of nonloading), or for 5 weeks, or just once (and assessed immediately or after 2 weeks of nonloading). Histologic features of loaded and control contralateral joints, including articular cartilage lesions, osteophyte formation, and pathologic features, were examined. Ex vivo visualization during loading was performed by microfocal computed tomography (micro-CT).nnnRESULTSnTwo weeks of loading produced articular cartilage lesions only at sites of maximal contact as exhibited by micro-CT; after 3 weeks without further loading, joints in another group of mice identically loaded revealed significant increases in mean lesion severity to levels seen following 5 weeks of loading. Single application of load also induced lesions, but in this case, 2 weeks of solely habitual use did not lead to further deterioration. Only repetitive loading induced loss of Safranin O staining. Loading also led to osteophyte formation, meniscal ossification, synovial hyperplasia and fibrosis, and cruciate ligament pathology, with a severity that was dependent upon the loading regimen utilized.nnnCONCLUSIONnWe describe for the first time a noninvasive model of murine knee joint loading. This will further the study of mechanical and genetic interactions in joint health and in OA initiation and progression.

Transplantation of human fetal blood stem cells in the osteogenesis imperfecta mouse leads to improvement in multiscale tissue properties.

Osteogenesis imperfecta (OI or brittle bone disease) is a disorder of connective tissues caused by mutations in the collagen genes. We previously showed that intrauterine transplantation of human blood fetal stem/stromal cells in OI mice (oim) resulted in a significant reduction of bone fracture. This work examines the cellular mechanisms and mechanical bone modifications underlying these therapeutic effects, particularly examining the direct effects of donor collagen expression on bone material properties. In this study, we found an 84% reduction in femoral fractures in transplanted oim mice. Fetal blood stem/stromal cells engrafted in bones, differentiated into mature osteoblasts, expressed osteocalcin, and produced COL1a2 protein, which is absent in oim mice. The presence of normal collagen decreased hydroxyproline content in bones, altered the apatite crystal structure, increased the bone matrix stiffness, and reduced bone brittleness. In conclusion, expression of normal collagen from mature osteoblast of donor origin significantly decreased bone brittleness by improving the mechanical integrity of the bone at the molecular, tissue, and whole bone levels.

Structural and mechanical differences between collagen homo- and heterotrimers: relevance for the molecular origin of brittle bone disease.

Collagen constitutes one-third of the human proteome, providing mechanical stability, elasticity, and strength to organisms. Normal type I collagen is a heterotrimer triple-helical molecule consisting of two α-1 chains and one α-2 chain. The homotrimeric isoform of type I collagen, which consists of three α-1 chains, is only found in fetal tissues, fibrosis, and cancer in humans. A mouse model of the genetic brittle bone disease, osteogenesis imperfect, oim, is characterized by a replacement of the α-2 chain by an α-1 chain, resulting also in a homotrimer collagen molecule. Experimental studies of oim mice tendon and bone have shown reduced mechanical strength compared to normal mice. The relationship between the molecular content andxa0the decrease in strength is, however, still unknown. Here, fully atomistic simulations of a section of mouse type I heterotrimer and homotrimer collagen molecules are developed to explore the effect of the substitution of the α-2 chain. We calculate the persistence length and carry out a detailed analysis of the structure to determine differences in structural and mechanical behavior between hetero- and homotrimers. The results show that homotrimer persistence length is half of that of the heterotrimer (96xa0Å vs. 215xa0Å), indicating it is more flexible and confirmed by direct mechanical testing. Our structural analyses reveal that in contrast to the heterotrimer, the homotrimer easily forms kinks and freely rotates with angles much larger than heterotrimer. These local kinks may explain the larger lateral distance between collagen molecules seen in the fibrils of oim mice tendon and could have implications for reducing the intermolecular cross-linking, which is known to reduce the mechanical strength.

How tough is brittle bone? Investigating osteogenesis imperfecta in mouse bone.

The multiscale hierarchical structure of bone is naturally optimized to resist fractures. In osteogenesis imperfecta, or brittle bone disease, genetic mutations affect the quality and/or quantity of collagen, dramatically increasing bone fracture risk. Here we reveal how the collagen defect results in bone fragility in a mouse model of osteogenesis imperfecta (oim), which has homotrimeric α1(I) collagen. At the molecular level, we attribute the loss in toughness to a decrease in the stabilizing enzymatic cross‐links and an increase in nonenzymatic cross‐links, which may break prematurely, inhibiting plasticity. At the tissue level, high vascular canal density reduces the stable crack growth, and extensive woven bone limits the crack‐deflection toughening during crack growth. This demonstrates how modifications at the bone molecular level have ramifications at larger length scales affecting the overall mechanical integrity of the bone; thus, treatment strategies have to address multiscale properties in order to regain bone toughness. In this regard, findings from the heterozygous oim bone, where defective as well as normal collagen are present, suggest that increasing the quantity of healthy collagen in these bones helps to recover toughness at the multiple length scales.

Insight into differences in nanoindentation properties of bone.

Nanoindentation provides the ideal framework to determine mechanical properties of bone at the tissue scale without being affected by the size, shape, and porosity of the bone. However, the values of tissue level mechanical properties vary significantly between studies. Since the differences in the bone sample, hydration state, and test parameters complicate direct comparisons across the various studies, these discrepancies in values cannot be compared directly. The objective of the current study is to evaluate and compare mechanical properties of the same bones using a broad range of testing parameters. Wild type C56BL6 mice tibiae were embedded following different processes and tested in dry and rehydrated conditions. Spherical and Berkovich indenter probes were used, and data analysis was considered within the elasto-plastic (Oliver-Pharr), viscoelastic and visco-elastic-plastic frameworks. The mean values of plane strain modulus varied significantly depending on the hydration state, probe geometry and analysis method. Indentations in dry bone analyzed using a visco-elastic-plastic approach gave values of 34 GPa. After rehydrating the same bones and indenting them with a spherical tip and utilizing a viscoelastic analysis, the mean modulus value was 4 GPa, nearly an order of magnitude smaller. Results suggest that the hydration state, probe geometry and the limitations and assumptions of each analysis method influence significantly the measured mechanical properties. This is the first time that such a systematic study has been carried out and it has been concluded that the discrepancies in the mechanical properties of bone measured by nanoindentation found in the literature should not be attributed only to the differences between the bones themselves, but also to the testing and analysis protocols.

Determination of gait patterns in children with spastic diplegic cerebral palsy using principal components

This study developed an objective graphical classification method of spastic diplegic cerebral palsy (CP) gait patterns based on principal component analysis (PCA). Gait analyses of 20 healthy and 20 spastic diplegic CP children were examined to define gait characteristics. PCA was used to reduce the dimensionality of 27 parameters (26 selected kinematics variables and age of the children) for the 40 subjects in order to identify the dominant variability in the data. Fuzzy C-mean cluster analysis was performed plotting the first three principal components, which accounted for 61% of the total variability. Results indicated that only the healthy children formed a distinct cluster; however it was possible to recognise gait patterns in overlapping clusters in children with spastic diplegia. This study demonstrates that it is possible to quantitatively classify gait types in CP using PCA. Graphical classification of gait types could assist in clinical evaluation of the children and serve as a validation of clinical reports as well as aid treatment planning.

Ultra-structural defects cause low bone matrix stiffness despite high mineralization in osteogenesis imperfecta mice ☆

Bone is a complex material with a hierarchical multi-scale organization from the molecule to the organ scale. The genetic bone disease, osteogenesis imperfecta, is primarily caused by mutations in the collagen type I genes, resulting in bone fragility. Because the basis of the disease is molecular with ramifications at the whole bone level, it provides a platform for investigating the relationship between structure, composition, and mechanics throughout the hierarchy. Prior studies have individually shown that OI leads to: 1. increased bone mineralization, 2. decreased elastic modulus, and 3. smaller apatite crystal size. However, these have not been studied together and the mechanism for how mineral structure influences tissue mechanics has not been identified. This lack of understanding inhibits the development of more accurate models and therapies. To address this research gap, we used a mouse model of the disease (oim) to measure these outcomes together in order to propose an underlying mechanism for the changes in properties. Our main finding was that despite increased mineralization, oim bones have lower stiffness that may result from the poorly organized mineral matrix with significantly smaller, highly packed and disoriented apatite crystals. Using a composite framework, we interpret the lower oim bone matrix elasticity observed as the result of a change in the aspect ratio of apatite crystals and a disruption of the crystal connectivity.

Upregulating CXCR4 in Human Fetal Mesenchymal Stem Cells Enhances Engraftment and Bone Mechanics in a Mouse Model of Osteogenesis Imperfecta

Stem cells have considerable potential to repair damaged organs and tissues. We previously showed that prenatal transplantation of human first trimester fetal blood mesenchymal stem cells (hfMSCs) in a mouse model of osteogenesis imperfecta (oim mice) led to a phenotypic improvement, with a marked decrease in fracture rate. Donor cells differentiated into mature osteoblasts, producing bone proteins and minerals, including collagen type Iα2, which is absent in nontransplanted mice. This led to modifications of the bone matrix and subsequent decrease of bone brittleness, indicating that grafted cells directly contribute to improvement of bone mechanical properties. Nevertheless, the therapeutic effect was incomplete, attributing to the limited level of engraftment in bone. In this study, we show that although migration of hfMSCs to bone and bone marrow is CXCR4‐SDF1 (SDF1 is stromal‐derived factor) dependent, only a small number of cells present CXCR4 on the cell surface despite high levels of internal CXCR4. Priming with SDF1, however, upregulates CXCR4 to increase the CXCR4+ cell fraction, improving chemotaxis in vitro and enhancing engraftment in vivo at least threefold in both oim and wild‐type bone and bone marrow. Higher engraftment in oim bones was associated with decreased bone brittleness. This strategy represents a step to improve the therapeutic benefits of fetal cell therapy toward being curative.