Sangyoon J. Han

Decoupling Substrate Stiffness, Spread Area, and Micropost Density: A Close Spatial Relationship between Traction Forces and Focal Adhesions

Mechanical cues can influence the manner in which cells generate traction forces and form focal adhesions. The stiffness of a cells substrate and the available area on which it can spread can influence its generation of traction forces, but to what extent these factors are intertwined is unclear. In this study, we used microcontact printing and micropost arrays to control cell spreading, substrate stiffness, and post density to assess their effect on traction forces and focal adhesions. We find that both the spread area and the substrate stiffness influence traction forces in an independent manner, but these factors have opposite effects: cells on stiffer substrates produce higher average forces, whereas cells with larger spread areas generate lower average forces. We show that post density influences the generation of traction forces in a manner that is more dominant than the effect of spread area. Additionally, we observe that focal adhesions respond to spread area, substrate stiffness, and post density in a manner that closely matches the trends seen for traction forces. This work supports the notion that traction forces and focal adhesions have a close relationship in their response to mechanical cues.

Substrate stiffness increases twitch power of neonatal cardiomyocytes in correlation with changes in myofibril structure and intracellular calcium

During neonatal development, there is an increase in myocardial stiffness that coincides with an increase in the contractility of the heart. In vitro assays have shown that substrate stiffness plays a role in regulating the twitch forces produced by immature cardiomyocytes. However, its effect on twitch power is unclear due to difficulties in measuring the twitch velocity of cardiomyocytes. Here, we introduce what we consider a novel approach to quantify twitch power by combining the temporal resolution of optical line scanning with the subcellular force resolution of micropost arrays. Using this approach, twitch power was found to be greater for cells cultured on stiffer posts, despite having lower twitch velocities. The increased power was attributed in part to improved myofibril structure (increased sarcomere length and Z-band width) and intracellular calcium levels. Immunofluorescent staining of α-actin revealed that cardiomyocytes had greater sarcomere length and Z-band width when cultured on stiffer arrays. Moreover, the concentration of intracellular calcium at rest and its rise with each twitch contraction was greater for cells on the stiffer posts. Altogether, these findings indicate that cardiomyocytes respond to substrate stiffness with biomechanical and biochemical changes that lead to an increase in cardiac contractility.

Measuring the Contractile Forces of Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes With Arrays of Microposts

Human stem cell-derived cardiomyocytes hold promise for heart repair, disease modeling, drug screening, and for studies of developmental biology. All of these applications can be improved by assessing the contractility of cardiomyocytes at the single cell level. We have developed an in vitro platform for assessing the contractile performance of stem cell-derived cardiomyocytes that is compatible with other common endpoints such as microscopy and molecular biology. Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) were seeded onto elastomeric micropost arrays in order to characterize the contractile force, velocity, and power produced by these cells. We assessed contractile function by tracking the deflection of microposts beneath an individual hiPSC-CM with optical microscopy. Immunofluorescent staining of these cells was employed to assess their spread area, nucleation, and sarcomeric structure on the microposts. Following seeding of hiPSC-CMs onto microposts coated with fibronectin, laminin, and collagen IV, we found that hiPSC-CMs on laminin coatings demonstrated higher attachment, spread area, and contractile velocity than those seeded on fibronectin or collagen IV coatings. Under optimized conditions, hiPSC-CMs spread to an area of approximately 420 μm2, generated systolic forces of approximately 15 nN/cell, showed contraction and relaxation rates of 1.74 μm/s and 1.46 μm/s, respectively, and had a peak contraction power of 29 fW. Thus, elastomeric micropost arrays can be used to study the contractile strength and kinetics of hiPSC-CMs. This system should facilitate studies of hiPSC-CM maturation, disease modeling, and drug screens as well as fundamental studies of human cardiac contraction.

Competition for actin between two distinct F-actin networks defines a bistable switch for cell polarization

Symmetry-breaking polarization enables functional plasticity of cells and tissues and is yet not well understood. Here we show that epithelial cells, hard-wired to maintain a static morphology and to preserve tissue organization, can spontaneously switch to a migratory polarized phenotype after relaxation of the actomyosin cytoskeleton. We find that myosin II engages actin in the formation of cortical actomyosin bundles and thus makes it unavailable for deployment in the process of dendritic growth normally driving cell motility. Under low-contractility regimes, epithelial cells polarize in a front–back manner owing to the emergence of actin retrograde flows powered by dendritic polymerization of actin. Coupled to cell movement, the flows transport myosin II from the front to the back of the cell, where the motor locally ‘locks’ actin in contractile bundles. This polarization mechanism could be employed by embryonic and cancer epithelial cells in microenvironments where high-contractility-driven cell motion is inefficient.

Flow mechanotransduction regulates traction forces, intercellular forces, and adherens junctions

Endothelial cells respond to fluid shear stress through mechanotransduction responses that affect their cytoskeleton and cell-cell contacts. Here, endothelial cells were grown as monolayers on arrays of microposts and exposed to laminar or disturbed flow to examine the relationship among traction forces, intercellular forces, and cell-cell junctions. Cells under laminar flow had traction forces that were higher than those under static conditions, whereas cells under disturbed flow had lower traction forces. The response in adhesion junction assembly matched closely with changes in traction forces since adherens junctions were larger in size for laminar flow and smaller for disturbed flow. Treating the cells with calyculin-A to increase myosin phosphorylation and traction forces caused an increase in adherens junction size, whereas Y-27362 cause a decrease in their size. Since tugging forces across cell-cell junctions can promote junctional assembly, we developed a novel approach to measure intercellular forces and found that these forces were higher for laminar flow than for static or disturbed flow. The size of adherens junctions and tight junctions matched closely with intercellular forces for these flow conditions. These results indicate that laminar flow can increase cytoskeletal tension while disturbed flow decreases cytoskeletal tension. Consequently, we found that changes in cytoskeletal tension in response to shear flow conditions can affect intercellular tension, which in turn regulates the assembly of cell-cell junctions.

Traction microscopy to identify force modulation in subresolution adhesions

We present a reconstruction algorithm that resolves cellular tractions in diffraction-limited nascent adhesions (NAs). The enabling method is the introduction of sparsity regularization to the solution of the inverse problem, which suppresses noise without underestimating traction magnitude. We show that NAs transmit a distinguishable amount of traction and that NA maturation depends on traction growth rate. A software package implementing this numerical approach is provided.

Thermal fracture of oxidized polydimethylsiloxane during soft lithography of nanopost arrays

During the fabrication of nanopost arrays for measuring cellular forces, we have observed surface cracks in the negative molds used to replicate the arrays from a silicon master. These cracks become more numerous and severe with each replication such that repeated castings lead to arrays with missing or broken posts. This loss in pattern fidelity from the silicon master undermines the spatial resolution of the nanopost arrays in measuring cellular forces. We hypothesized that these cracks are formed because of a mismatch in the coefficient of thermal expansion (CTE) of polydimethylsiloxane (PDMS) and its oxidized surface layer. To study the fracture of PDMS due to thermal effects, we treated circular test samples of PDMS with oxidizing plasma and then heated them to cause surface cracks. These cracks were found to be more abundant at 180 °C than at lower temperatures. Finite element analysis of a bilayer material with a CTE mismatch was used to validate that thermal stresses are sufficient to overcome the fracture toughness of oxidized PDMS. As a consequence, we have ascertained that elevated temperatures are a significant detriment to the reproducibility of nanoscale features in PDMS during replica molding.

Simulations of the contractile cycle in cell migration using a bio-chemical–mechanical model

Cell migration relies on traction forces in order to propel a cell. Several computational models have been developed that help explain the trajectory that cells take during migration, but little attention has been placed on traction forces during this process. Here, we investigated the spatiotemporal dynamics of cell migration by using a bio-chemical–mechanical contractility model that incorporates the first steps of cell migration on an array of posts. In the model, formation of a new adhesion causes a reactivation of stress fibre assembly within a cell. The model was able to predict the spatial distribution of traction forces observed with previous experiments. Moreover, the model found that the strain energy exerted by the traction forces of a migrating cell underwent a cyclic relationship that rose with the formation of a new adhesion and fell with the release of an adhesion at its rear.

Vimentin fibers orient traction stress

Significance Vimentin is a marker for the epithelial-to-mesenchymal transition, which is thought to lead to cancer metastasis. Without vimentin, planar cells exhibit polarity defects and cannot migrate as single cells. The mechanisms by which vimentin influences cell migration remain mostly unknown, however. Generally, intermediate filaments regulate the mechanical integrity of cells and tissues; thus, we hypothesized that vimentin could be involved in supporting the directionally aligned force transmission required for single-cell migration. We have developed imaging and analysis methods to probe the role of vimentin in mesenchymal cell migration that will have broad utility in intermediate filament research. In summary, our results demonstrate that vimentin governs the alignment of the cell traction forces needed for directed single-cell mesenchymal migration. The intermediate filament vimentin is required for cells to transition from the epithelial state to the mesenchymal state and migrate as single cells; however, little is known about the specific role of vimentin in the regulation of mesenchymal migration. Vimentin is known to have a significantly greater ability to resist stress without breaking in vitro compared with actin or microtubules, and also to increase cell elasticity in vivo. Therefore, we hypothesized that the presence of vimentin could support the anisotropic mechanical strain of single-cell migration. To study this, we fluorescently labeled vimentin with an mEmerald tag using TALEN genome editing. We observed vimentin architecture in migrating human foreskin fibroblasts and found that network organization varied from long, linear bundles, or “fibers,” to shorter fragments with a mesh-like organization. We developed image analysis tools employing steerable filtering and iterative graph matching to characterize the fibers embedded in the surrounding mesh. Vimentin fibers were aligned with fibroblast branching and migration direction. The presence of the vimentin network was correlated with 10-fold slower local actin retrograde flow rates, as well as spatial homogenization of actin-based forces transmitted to the substrate. Vimentin fibers coaligned with and were required for the anisotropic orientation of traction stresses. These results indicate that the vimentin network acts as a load-bearing superstructure capable of integrating and reorienting actin-based forces. We propose that vimentins role in cell motility is to govern the alignment of traction stresses that permit single-cell migration.

MENA Confers Resistance to Paclitaxel in Triple-Negative Breast Cancer

Taxane therapy remains the standard of care for triple-negative breast cancer. However, high frequencies of recurrence and progression in treated patients indicate that metastatic breast cancer cells can acquire resistance to this drug. The actin regulatory protein MENA and particularly its invasive isoform, MENAINV, are established drivers of metastasis. MENAINV expression is significantly correlated with metastasis and poor outcome in human patients with breast cancer. We investigated whether MENA isoforms might play a role in driving resistance to chemotherapeutics. We find that both MENA and MENAINV confer resistance to the taxane paclitaxel, but not to the widely used DNA-damaging agents doxorubicin or cisplatin. Furthermore, paclitaxel treatment does not attenuate growth of MENAINV-driven metastatic lesions. Mechanistically, MENA isoform expression alters the ratio of dynamic and stable microtubule populations in paclitaxel-treated cells. MENA expression also increases MAPK signaling in response to paclitaxel treatment. Decreasing ERK phosphorylation by co-treatment with MEK inhibitor restored paclitaxel sensitivity by driving microtubule stabilization in MENA isoform–expressing cells. Our results reveal a novel mechanism of taxane resistance in highly metastatic breast cancer cells and identify a combination therapy to overcome such resistance. Mol Cancer Ther; 16(1); 143–55. ©2016 AACR.