Sanjib Moulick

Aeration characteristics of a rectangular stepped cascade system

Aeration experiments, maintaining nappe flow conditions, were carried out on a rectangular stepped cascade of total height 3.0 m to determine the total number of steps, slope of the entire cascade and hydraulic loading rate at which maximum overall aeration efficiency occurs, keeping the surface area of individual steps constant. Based on dimensional analysis, the overall aeration efficiency at standard conditions (E(20)) was expressed as a function of square of total number of steps (N(2)) and dimensionless discharge (d(c)/h), where d(c) and h represent critical depth in a rectangular prismatic channel and individual step height respectively. An empirical equation with E(20) as the response and N(2) and d(c)/h as the independent parameters was developed based on the experimental results subject to 36<or=N(2)<or =196 and 0.009<or=d(c)/h< or=0.144. The experimental results showed that the overall aeration efficiency (E(20)) for a particular step height of stepped cascade increases with increase in d(c)/h up to a certain value and then decreases. This may be due to at higher d(c)/h, i.e., at higher hydraulic loading rate, the flow approaches the transition zone and thereby aeration efficiency decreases. E(20) was also found to increase with number of steps at any hydraulic loading rate, because of the increased surface area of fall. The optimum number of steps, slope of the entire stepped cascade and hydraulic loading rate were found to be 14, 0.351 and 0.009 m(2)/s respectively producing the maximum value of overall aeration efficiency of 0.90.

Water Quality and Growth of Rohu, Labeo rohita, in a Biofloc System

We evaluated the technical feasibility of reducing water dependency of rohu, Labeo rohita, culture with biofloc under light-limited indoor culture. Biofloc and control treatments were conducted in 700-L indoor tanks at three different stocking densities (STD): 1.3, 2.6, and 3.9 Nos. fish m−2 of surface area of tank for a period of 90 days. In biofloc treatment, fish were fed 20% crude protein feed and extra organic carbon in the form of wheat flour, whereas in case of control treatment they were fed 30% crude protein feed only. Fish survival was 100% in both the treatments. Lower stocking density produced larger fish, but growth was similar within stocking densities among control and biofloc treatments. The nutritional quality of biofloc was found to be quite suitable for rohu. Frequency of water exchange was significantly less in biofloc treatments as compared to the control ones.

Nutrient modeling for a semi- intensive IMC pond: an MS excel approach

Semi-intensive Indian Major Carp (IMC) culture was practised in polythene lined dugout ponds at the Aquacultural Farm of Indian Institute of Technology, Kharagpur, West Bengal for 3 consecutive years at three different stocking densities (S.D), viz., 20,000, 35,000 and 50,000 numbers of fingerlings per hectare of water spread area. Fingerlings of Catla, Rohu and Mrigal were raised at a stocking ratio of 4:3:3. Total ammonia nitrogen (TAN) value along with other fishpond water quality parameters was monitored at 1 day intervals to ensure a good water ecosystem for a better fish growth. Water exchange was carried out before the TAN reached the critical limit. Field data on TAN obtained from the cultured fishponds stocked with three different stocking densities were used to study the dynamics of TAN. A developed model used to study the nutrient dynamics in shrimp pond was used to validate the observed data in the IMC pond ecosystem. Two years of observed TAN data were used to calibrate the spreadsheet model and the same model was validated using the third year observed data. The manual calibration based on the trial and error process of parameters adjustments was used and several simulations were performed by changing the model parameters. After adjustment of each parameter, the simulated and measured values of the water quality parameters were compared to judge the improvement in the model prediction. Forward finite difference discretization method was used in a MS-Excel spreadsheet to calibrate and validate the model for obtaining the TAN levels during the culture period. Observed data from the cultured fishponds of three different S.D were used to standardize 13 model parameters. The efficiency of the developed spreadsheet model was found to be more than 90% for the TAN estimation in the IMC cultured fishponds.