Sara Nardis

Novel Aspects of Corrole Chemistry

Corrole is one of the first examples of porphyrin analogs reported in the literature. This class of compounds has received a great attention, because of their promising exploitation in different fields, ranging from medicine to material chemistry. Among them, corrole can be considered the prototypical example of contracted porphyrins, with one of the meso carbon bridges missing. Although this macrocycle was first reported more than thirty years ago, only recently more attention has been devoted to the chemistry of corrole. The recent availability of efficient and facile syntheses of meso-substituted corroles has probably been the shuttle for the impressive flourishing of corrole-related papers appearing in literature in the last few years. The aim of this review is to highlight the latest reports in the synthetic chemistry of corrole, with special attention to the synthetic strategies and peripheral functionalizations of this macrocycle.

Novel routes to substituted 5,10,15-triarylcorroles

A one-pot procedure that allows the preparation of 5,10,15-triarylcorroles directly from the condensation of pyrrole and benzaldehydes, avoiding the concomitant formation of the corresponding tetraarylporphyrins, has been developed. This approach is general and allows the preparation of sterically hindered corroles from 2,6-disubstituted benzaldehydes, where the Rothemund approach failed. The first examples of fully substituted corrole free bases were prepared following this approach, but in this case corroles were obtained as a mixture with the corresponding dodecasubstituted porphyrins. Unsymmetrically substituted ABC corroles were obtained from the condensation of two different dipyrromethanes. A [2+12] biladiene-like approach afforded 10-(4-methylphenyl)-5,15-diphenylcorrole, along with a significant amount of tetraphenylporphyrin from the self-tetramerization of the starting pyrryl carbinol. An X-ray structure of 5,10,15-triphenylcorrole shows deviations from planarity that are attributed to the ster...

Porphyrinoids for Chemical Sensor Applications

Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

Preparation and self-assembly of chiral porphyrin diads on the gold electrodes of quartz crystal microbalances: A novel potential approach to the development of enantioselective chemical sensors

Porphyrin diad 1 was synthesized by reaction of the acyl chloride of porphyrin 2 and trans-1,2-dithiane-4,5-diol. The Co complex of this diad was studied as a potential enantioselective receptor for chiral recognition in solution and in the solid state. In solution both enantiomers of limonene induce significant changes in the visible and circular dichroism (CD) spectra of [Co2(1)], while a different behavior is observed in the case of the enantiomeric pair of trans-1,2-diaminocyclohexane. A different efficiency of [Co2(1)] chiral recognition is obtained for these compounds, with a remarkable degree of enantiodiscrimination observed in the case of limonene. Self-assembled monolayers of [Co2(1)] were deposited onto the gold electrodes of quartz crystal microbalances to be used as sensing materials of nanogravimetric sensors operating in the gas phase. The enantiodiscrimination properties of these sensors towards the enantiomeric pairs of chiral analytes have been studied. While in the case of analytes bearing donor ligand atoms we did not observe a remarkable enantioselectivity, a significant degree of chiral discrimination was observed in the case of limonene; this result is particularly encouraging for the potential development of enantioselective chemical sensors for use in an array configuration.

β-Nitro-5,10,15-tritolylcorroles.

Functionalization of the β-pyrrolic positions of the corrole macrocycle with -NO(2) groups is limited at present to metallocorrolates due to the instability exhibited by corrole free bases under oxidizing conditions. A careful choice of the oxidant can limit the transformation of corroles into decomposition products or isocorrole species, preserving the corrole aromaticity, and thus allowing the insertion of nitro groups onto the corrole framework. Here we report results obtained by reacting 5,10,15-tritolylcorrole (TTCorrH(3)) with the AgNO(2)/NaNO(2) system, to give mono- and dinitrocorrole derivatives when stoichiometry is carefully controlled. Reactions were found to be regioselective, affording the 3-NO(2)TTCorrH(3) and 3,17-(NO(2))(2)TTCorrH(3) isomers as the main products in the case of mono- and disubstitution, in 53 and 20% yields, respectively. In both cases, traces of other mono- and disubstituted isomers were detected, which were structurally characterized by X-ray crystallography. The influence of the β-nitro substituents on the corrole properties is studied in detail by UV-visible, electrochemical, and spectroelectrochemical characterization of these functionalized corroles. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations of the ground and excited state properties of these β-nitrocorrole derivatives also afforded significant information, closely matching the experimental observations. It is found that the β-NO(2) substituents conjugate with the π-aromatic system of the macrocycle, which initiates significant changes in both the spectroscopic and redox properties of the so functionalized corroles. This effect is more pronounced when the nitro group is introduced at the 2-position, because in this case the conjugation is, for steric reasons, more efficient than in the 3-nitro isomer.

Demetalation of corrole complexes: an old dream turning into reality

Different strategies for the demetalation of corrole complexes have been developed, using copper complexes of corrole as model compounds. Best results were obtained using the acidic mixture CHCl3/H2SO4, which allowed the almost complete removal of copper ions from both meso-triaryl-, β-octaalkyl- and fully substituted corroles. This route reduced both the decomposition of the starting complex and the formation of isocorrole species produced by oxidation of the corrole ring in the acidic conditions necessary for the demetalation reaction. To investigate the scope of the reaction, the same approach was later extended to other metal complexes of corrole, such as cobalt, manganese, iron and germanium derivatives. Although not always successful, this approach demonstrated that in the case of corrole it is also possible to obtain a reversible coordination of metal ions, a route of synthetic interest for further functionalization of the corrole ring.

Sensitivity-selectivity balance in mass sensors: the case of metalloporphyrins

The influence of peripheral alkyl substituents on the sensing behaviour of metalloporphyrin-based Thickness Shear Mode Resonating sensors (TSMRs) has been investigated. The presence of the alkyl chains improves the metalloporphyrin thin film permeability but at the same time increases the magnitude of non-specific interactions, reducing the influence of the intrinsic metalloporphyrin selectivity. The butyloxy derivative 2 represents a good example of a compromise between these opposite effects, where the short alkyl chain is able to increase the sensitivity and response time behaviour of the TSMR sensor, without significant loss of the selectivity properties.

Amination reaction on copper and germanium β-nitrocorrolates.

Copper and germanium complexes of β-substituted nitrocorroles were reacted with 4-amino-4H-1,2,4-triazole to give the corresponding β-amino-β-nitro derivatives, in moderate to good yields. This is the first successful example of a vicarious nucleophilic substitution performed on corrole derivatives, because the same reaction carried out on silver complexes afforded the corresponding 6-azahemiporphycenes by way of corrole ring expansion. The first step of this work is related to the modification of a synthetic protocol for preparation of the β-substituted nitro corroles. The nitration reaction was carried out on a copper corrole using NaNO(2) as the primary source of NO(2)(-) coupled with AgNO(2) used as oxidant. By variation of the molar ratio of the reagents it was possible to direct the product distribution toward mono- and dinitro derivatives. The reaction between mono- and dinitro derivatives of (TtBuCorrCu) with 4-amino-4H-1,2,4-triazole gave good results, leading to the isolation of 2-(NH(2))-3-(NO(2))-TtBuCorrCu and 2,18-(NH(2))(2)-3,17-(NO(2))(2)-TtBuCorrCu in moderate yields. To elucidate factors that influence the reaction, and to highlight the different behavior observed for different metal complex substrates, the electrochemistry of three copper complexes, TtBuPCorrCu, (NO(2))TtBuPCorrCu, and (NO(2))(2)TtBuPCorrCu, was studied by cyclic voltammetry and thin-layer UV-visible spectroelectrochemistry. The nitro groups on (NO(2))(x)TtBuPCorrCu are highly electron-withdrawing, which leads not only to a substantial positive shift of all redox potentials but also to a unique redox behavior and UV-vis spectrum of the singly reduced product as compared to the parent compound, TtBuPCorrCu. Finally, the amination reaction was carried out on a Ge(IV) nitrocorrolate, giving in good yield the 2-amino-3-nitroderivative, which was structurally characterized by single crystal X-ray crystallography.

Porphyrin-Based Nanostructures for Sensing Applications

The construction of nanosized supramolecular hosts via self-assembly of molecular components is a fascinating field of research. Such intriguing class of architectures, beside their intrinsic intellectual stimuli, is of importance in many fields of chemistry and technology, such as material chemistry, catalysis, and sensor applications. Within this wide scenario, tailored solid films of porphyrin derivatives are structures of great potential for, among others, chemical sensor applications. The formation of supramolecules relays on noncovalent interactions (electrostatic, hydrogen bond, 𝜋-𝜋, or coordinative interactions) driven by the chemical information stored on the assembling molecules, such as shape and functional groups. This allows, for example, the formation of large well-defined porphyrin aggregates in solution that can be spontaneously transferred onto a solid surface, so achieving a solid system with tailored features. These films have been used, covering the bridge between nanostructures and microsystems, for the construction of solid-state sensors for volatiles and metal ion recognition and detection. Moreover, the variation of peripheral substituents of porphyrins, such as, for example, chiral appended functionalities, can result in the formation of porphyrin aggregates featuring high supramolecular chirality. This would allow the achievement of porphyrin layers characterised by different chiroptical and molecular recognition properties.

Demetalation of Silver(III) Corrolates

Several procedures for the demetalation of silver(III) corrolates have been tested. Acidic conditions induce removal of the silver ion but they can also promote concomitant oxidation of the corrole nucleus to an isocorrole species, the degree of which will depend upon the specific acidic media. This oxidation cannot be completely avoided by addition of hydrazine, particularly in the case of 3-NO(2) substituted complexes which are quantitatively converted into the corresponding 3-NO(2), 5-hydroxy isocorroles upon silver ion removal. Several beta-nitro isocorrole products were isolated, and one was structurally characterized. Electrochemical and chemical reductive methods for silver(III) corrolates demetalation were then tested with the aim to avoid the formation of isocorroles. While reaction with sodium borohydride was shown to be quite effective to demetalate unsubstituted silver corrolates this was not the case for the beta-nitro derivatives where the peripheral nitro group is reduced by borohydride giving the corresponding 3-amino free base corrole species. For the beta-nitro corrole silver complexes, a successful approach was obtained using DBU/THF solutions which afforded the 3-NO(2) corrole free-base compound as a single reaction product in good yield. These conditions were also effective for unsubstituted corroles although longer reaction times were necessary in this case. To study in greater detail the corrole demetalation behavior, selected Ag(III) derivatives were characterized by cyclic voltammetry in pyridine, and the demetalation products spectrally characterized after controlled potential reduction in a thin-layer spectroelectrochemical cell.