Sarah E. Deacon

Adhiron: a stable and versatile peptide display scaffold for molecular recognition applications.

We have designed a novel non-antibody scaffold protein, termed Adhiron, based on a phytocystatin consensus sequence. The Adhiron scaffold shows high thermal stability (Tm ca. 101°C), and is expressed well in Escherichia coli. We have determined the X-ray crystal structure of the Adhiron scaffold to 1.75 Å resolution revealing a compact cystatin-like fold. We have constructed a phage-display library in this scaffold by insertion of two variable peptide regions. The library is of high quality and complexity comprising 1.3 × 1010 clones. To demonstrate library efficacy, we screened against the yeast Small Ubiquitin-like Modifier (SUMO). In selected clones, variable region 1 often contained sequences homologous to the known SUMO interactive motif (V/I-X-V/I-V/I). Four Adhirons were further characterised and displayed low nanomolar affinities and high specificity for yeast SUMO with essentially no cross-reactivity to human SUMO protein isoforms. We have identified binders against >100 target molecules to date including as examples, a fibroblast growth factor (FGF1), platelet endothelial cell adhesion molecule (PECAM-1; CD31), the SH2 domain Grb2 and a 12-aa peptide. Adhirons are highly stable and well expressed allowing highly specific binding reagents to be selected for use in molecular recognition applications.

Label-free electrochemical impedance biosensor to detect human interleukin-8 in serum with sub-pg/ml sensitivity

Biosensors with high sensitivity and short time-to-result that are capable of detecting biomarkers in body fluids such as serum are an important prerequisite for early diagnostics in modern healthcare provision. Here, we report the development of an electrochemical impedance-based sensor for the detection in serum of human interleukin-8 (IL-8), a pro-angiogenic chemokine implicated in a wide range of inflammatory diseases. The sensor employs a small and robust synthetic non-antibody capture protein based on a cystatin scaffold that displays high affinity for human IL-8 with a KD of 35±10 nM and excellent ligand specificity. The change in the phase of the electrochemical impedance from the serum baseline, ∆θ(ƒ), measured at 0.1 Hz, was used as the measure for quantifying IL-8 concentration in the fluid. Optimal sensor signal was observed after 15 min incubation, and the sensor exhibited a linear response versus logarithm of IL-8 concentration from 900 fg/ml to 900 ng/ml. A detection limit of around 90 fg/ml, which is significantly lower than the basal clinical levels of 5–10 pg/ml, was observed. Our results are significant for the development of point-of-care and early diagnostics where high sensitivity and short time-to-results are essential.

A high-throughput assay of membrane protein stability.

The preparation of purified, detergent-solubilized membrane proteins in a monodisperse and stable form is usually a prerequisite for investigation not only of their function but also for structural studies by X-ray crystallography and other approaches. Typically, it is necessary to explore a wide range of conditions, including detergent type, buffer pH, and the presence of additives such as glycerol, in order to identify those optimal for stability. Given the difficulty of expressing and purifying membrane proteins in large amounts, such explorations must ideally be performed on as small a scale as practicable. To achieve this objective in the UK Membrane Protein Structure Initiative, we have developed a rapid, economical, light-scattering assay of membrane protein aggregation that allows the testing of 48 buffer conditions in parallel on 6 protein targets, requiring less than 2 mg protein for each target. Testing of the assay on a number of unrelated membrane transporters has shown that it is of generic applicability. Proteins of sufficient purity for this plate-based assay are first rapidly prepared using simple affinity purification procedures performed in batch mode. Samples are then transferred by microdialysis into each of the conditions to be tested. Finally, attenuance at 340 nm is monitored in a 384-well plate using a plate reader. Optimal conditions for protein stability identified in the assay can then be exploited for the tailored purification of individual targets in as stable a form as possible.

Reliable scale-up of membrane protein over-expression by bacterial auto-induction: From microwell plates to pilot scale fermentations

The production of well-ordered crystals of membrane proteins for structural investigation by X-ray diffraction typically requires extensive crystallization trials and may involve the screening of multiple detergents, lipids and other additives. Purification of sufficient amounts of protein for such trials is hampered by the fact that even when over-expressed, membrane proteins represent only a small percentage of the total protein content of bacteria. Fermentation-scale cultures of cells are therefore usually required. To maximize the efficiency and reduce the cost of such cultures, in the UK Membrane Protein Structure Initiative we have systematically investigated the use of auto-induction as an alternative to induction of expression with isopropyl-β-D-thiogalactoside. We report here the benefits of first optimizing expression on a multiwell plate scale by systematically varying the concentrations of glucose, glycerol, lactose and succinate present in the auto-induction medium. For subsequent scale-up, comparison of isopropyl-β-D-thiogalactoside induction in shake-flasks with auto-induction in shake-flasks and in 1L fermenters without and with control of pH and aeration revealed that highest yields of target protein were obtained using the latter culture conditions. However, analysis of the time-course of expression highlighted the importance of choosing the correct time for harvest. The high yields of target protein that can be obtained in a single batch by auto-induction, performed on a 30 l scale in a fermenter, obviate batch-to-batch variations that can add an unwanted variable to crystallization screening experiments. The approach described should therefore be of great utility for membrane protein production for structural studies.

Enhanced Fructose Oxidase Activity in a Galactose Oxidase Variant

Galactose oxidase (GO; EC 1.1.3.9) catalyses the oxidation of a wide range of primary alcohols including mono‐, oligo‐ and polysaccharides. High‐resolution structures have been determined for GO, but no structural information is available for the enzyme with bound substrate or inhibitor. Previously, computer‐aided docking experiments have been used to develop a plausible model for interactions between GO and the D‐galactose substrate. Residues implicated in such interactions include Arg330, Gln406, Phe464, Phe194 and Trp290. In the present study we describe an improved expression system for recombinant GO in the methylotrophic yeast Pichia pastoris. We use this system to express variant proteins mutated at Arg330 and Phe464 to explore the substrate binding model. We also demonstrate that the Arg330 variants display greater fructose oxidase activity than does wild‐type GO.

Investigation of the structure and function of a Shewanella oneidensis arsenical-resistance family transporter

The toxic metalloid arsenic is an abundant element and most organisms possess transport systems involved in its detoxification. One such family of arsenite transporters, the ACR3 family, is widespread in fungi and bacteria. To gain a better understanding of the molecular mechanism of arsenic transport, we report here the expression and characterization of a family member, So_ACR3, from the bacterium Shewanella oneidensis MR-1. Surprisingly, expression of this transporter in the arsenic-hypersensitive Escherichia coli strain AW3110 conferred resistance to arsenate, but not to arsenite. Purification of a C-terminally His-tagged form of the protein allowed the binding of putative permeants to be directly tested: arsenate but not arsenite quenched its intrinsic fluorescence in a concentration-dependent fashion. Fourier transform infrared spectroscopy showed that the purified protein was predominantly α-helical. A mutant bearing a single cysteine residue at position 3 retained the ability to confer arsenate resistance, and was accessible to membrane impermeant thiol reagents in intact cells. In conjunction with successful C-terminal tagging with oligohistidine, this finding is consistent with the experimentally-determined topology of the homologous human apical sodium-dependent bile acid transporter, namely 7 transmembrane helices and a periplasmic N-terminus, although the presence of additional transmembrane segments cannot be excluded. Mutation to alanine of the conserved residue proline 190, in the fourth putative transmembrane region, abrogated the ability of the transporter to confer arsenic resistance, but did not prevent arsenate binding. An apparently increased thermal stability is consistent with the mutant being unable to undergo the conformational transitions required for permeant translocation.

Enhanced Expression and Purification of Fungal Galactose Oxidase in Escherichia coli and Use for Analysis of a Saturation Mutagenesis Library

Galactose oxidase (GO) displays broad primary alcohol substrate specificity and so offers potential for engineering new substrate specificity by directed evolution. Producing variant libraries of sufficient complexity ideally requires expression of functional protein in a host such as Escherichia coli. Wild-type GO is produced by the fungus Fusarium graminiarum and is expressed poorly in E. coli. We introduced silent mutations within codons 2-7 of the mature GO coding sequence to enhance GO translation and have combined these with other expression-enhancing mutations. We selected the best E. coli host strain, autoinduction medium, induction temperature, harvest time and cell lysis procedure to produce active recombinant GO. Although normally secreted by the fungus, we have expressed GO in the cytoplasm of E. coli and have used a C-terminal Streptag II sequences for single-step affinity purification. This resulted in purification of 240 mg of functional GO per litre of shake flask culture. We have generated a saturation mutagenesis library at residue Cys383, known to influence substrate binding, and have used the optimised expression conditions to purify and characterise the resulting enzymes.Galactose oxidase (GO) displays broad primary alcohol substrate specificity and so offers potential for engineering new substrate specificity by directed evolution. Producing variant libraries of sufficient complexity ideally requires expression of functional protein in a host such as Escherichia coli. Wild‐type GO is produced by the fungus Fusarium graminiarum and is expressed poorly in E. coli. We introduced silent mutations within codons 2–7 of the mature GO coding sequence to enhance GO translation and have combined these with other expression‐enhancing mutations. We selected the best E. coli host strain, autoinduction medium, induction temperature, harvest time and cell lysis procedure to produce active recombinant GO. Although normally secreted by the fungus, we have expressed GO in the cytoplasm of E. coli and have used a C‐terminal Streptag II sequences for single‐step affinity purification. This resulted in purification of 240 mg of functional GO per litre of shake flask culture. We have generated a saturation mutagenesis library at residue Cys383, known to influence substrate binding, and have used the optimised expression conditions to purify and characterise the resulting enzymes.

A urea channel from Bacillus cereus reveals a novel hexameric structure

Urea is exploited as a nitrogen source by bacteria, and its breakdown products, ammonia and bicarbonate, are employed to counteract stomach acidity in pathogens such as Helicobacter pylori. Uptake in the latter is mediated by UreI, a UAC (urea amide channel) family member. In the present paper, we describe the structure and function of UACBc, a homologue from Bacillus cereus. The purified channel was found to be permeable not only to urea, but also to other small amides. CD and IR spectroscopy revealed a structure comprising mainly α-helices, oriented approximately perpendicular to the membrane. Consistent with this finding, site-directed fluorescent labelling indicated the presence of seven TM (transmembrane) helices, with a cytoplasmic C-terminus. In detergent, UACBc exists largely as a hexamer, as demonstrated by both cross-linking and size-exclusion chromatography. A 9 Å (1 Å=0.1 nm) resolution projection map obtained by cryo-electron microscopy of two-dimensional crystals shows that the six protomers are arranged in a planar hexameric ring. Each exhibits six density features attributable to TM helices, surrounding a putative central channel, while an additional helix is peripherally located. Bioinformatic analyses allowed individual TM regions to be tentatively assigned to the density features, with the resultant model enabling identification of residues likely to contribute to channel function.

Large-scale preparation of bacterial cell membranes by tangential flow filtration.

The preparation of cell membranes by ultracentrifugation of bacterial cell lysates, a pre-requisite for the purification of over-expressed membrane proteins, is both time-consuming and difficult to perform on a large scale. To overcome this bottleneck in the structural investigation of such proteins in the UK Membrane Protein Structure Initiative, we have investigated the alternative use of tangential flow filtration for preparation of membranes from Escherichia coli. This method proved to be superior to the conventional use of ultracentrifuges both in speed and in yield of membrane protein. Moreover, it could more readily be scaled up to process larger quantities of bacterial cells. Comparison of the purity and monodispersity of an over-expressed membrane protein purified from conventionally-prepared membranes and from membranes prepared by filtration revealed no substantial differences. The approach described should therefore be of general use for membrane protein preparation for a wide range of applications, including both structural and functional studies.