Sarah J. Butcher

A mechanism for initiating RNA-dependent RNA polymerization.

In most RNA viruses, genome replication and transcription are catalysed by a viral RNA-dependent RNA polymerase. Double-stranded RNA viruses perform these operations in a capsid (the polymerase complex), using an enzyme that can read both single- and double-stranded RNA. Structures have been solved for such viral capsids, but they do not resolve the polymerase subunits in any detail. Here we show that the 2u2009Å resolution X-ray structure of the active polymerase subunit from the double-stranded RNA bacteriophage φ6 (refs 3, 4) is highly similar to that of the polymerase of hepatitis C virus, providing an evolutionary link between double-stranded RNA viruses and flaviviruses. By crystal soaking and co-crystallization, we determined a number of other structures, including complexes with oligonucleotide and/or nucleoside triphosphates (NTPs), that suggest a mechanism by which the incoming double-stranded RNA is opened up to feed the template through to the active site, while the substrates enter by another route. The template strand initially overshoots, locking into a specificity pocket, and then, in the presence of cognate NTPs, reverses to form the initiation complex; this process engages two NTPs, one of which acts with the carboxy-terminal domain of the protein to prime the reaction. Our results provide a working model for the initiation of replication and transcription.

Insights into assembly from structural analysis of bacteriophage PRD1

The structure of the membrane-containing bacteriophage PRD1 has been determined by X-ray crystallography at about 4u2009Å resolution. Here we describe the structure and location of proteins P3, P16, P30 and P31. Different structural proteins seem to have specialist roles in controlling virus assembly. The linearly extended P30 appears to nucleate the formation of the icosahedral facets (composed of trimers of the major capsid protein, P3) and acts as a molecular tape-measure, defining the size of the virus and cementing the facets together. Pentamers of P31 form the vertex base, interlocking with subunits of P3 and interacting with the membrane protein P16. The architectural similarities with adenovirus and one of the largest known virus particles PBCV-1 support the notion that the mechanism of assembly of PRD1 is scaleable and applies across the major viral lineage formed by these viruses.

Molecular Mechanisms of Membrane Deformation by I-BAR Domain Proteins

BACKGROUNDnGeneration of membrane curvature is critical for the formation of plasma membrane protrusions and invaginations and for shaping intracellular organelles. Among the central regulators of membrane dynamics are the BAR superfamily domains, which deform membranes into tubular structures. In contrast to the relatively well characterized BAR and F-BAR domains that promote the formation of plasma membrane invaginations, I-BAR domains induce plasma membrane protrusions through a poorly understood mechanism.nnnRESULTSnWe show that I-BAR domains induce strong PI(4,5)P(2) clustering upon membrane binding, bend the membrane through electrostatic interactions, and remain dynamically associated with the inner leaflet of membrane tubules. Thus, I-BAR domains induce the formation of dynamic membrane protrusions to the opposite direction than do BAR and F-BAR domains. Strikingly, comparison of different I-BAR domains revealed that they deform PI(4,5)P(2)-rich membranes through distinct mechanisms. IRSp53 and IRTKS I-BARs bind membranes mainly through electrostatic interactions, whereas MIM and ABBA I-BARs additionally insert an amphipathic helix into the membrane bilayer, resulting in larger tubule diameter in vitro and more efficient filopodia formation in vivo. Furthermore, FRAP analysis revealed that whereas the mammalian I-BAR domains display dynamic association with filopodia, the C. elegans I-BAR domain forms relatively stable structures inside the plasma membrane protrusions.nnnCONCLUSIONSnThese data define I-BAR domain as a functional member of the BAR domain superfamily and unravel the mechanisms by which I-BAR domains deform membranes to induce filopodia in cells. Furthermore, our work reveals unexpected divergence in the mechanisms by which evolutionarily distinct groups of I-BAR domains interact with PI(4,5)P(2)-rich membranes.

Intermediates in the assembly pathway of the double-stranded RNA virus φ6

The double‐stranded RNA bacteriophage φ6 contains a nucleocapsid enclosed by a lipid envelope. The nucleocapsid has an outer layer of protein P8 and a core consisting of the four proteins P1, P2, P4 and P7. These four proteins form the polyhedral structure which acts as the RNA packaging and polymerase complex. Simultaneous expression of these four proteins in Escherichia coli gives rise to procapsids that can carry out the entire RNA replication cycle. Icosahedral image reconstruction from cryo‐electron micrographs was used to determine the three‐dimensional structures of the virion‐isolated nucleocapsid and core, and of several procapsid‐related particles expressed and assembled in E.coli. The nucleocapsid has a T = 13 surface lattice, composed primarily of P8. The core is a rounded structure with turrets projecting from the 5‐fold vertices, while the procapsid is smaller than the core and more dodecahedral. The differences between the core and the procapsid suggest that maturation involves extensive structural rearrangements producing expansion. These rearrangements are co‐ordinated with the packaging and RNA polymerization reactions that result in virus assembly. This structural characterization of the φ6 assembly intermediates reveals the ordered progression of obligate stages leading to virion assembly along with striking similarities to the corresponding Reoviridae structures.

Low pH induces swiveling of the glycoprotein heterodimers in the Semliki forest virus spike complex

Time-resolved cryoelectron microscopy reveals the first step in the conformational changes that enable membrane fusion in Semliki Forest virus. The neutral pH structure reveals a central cavity within the spike complex, plate-like extensions forming a layer above the membrane, and the paths of the paired transmembrane domains connecting the trimeric spikes and pentamer-hexamer clustered capsid subunits. Low pH treatment results in centrifugal movement of E2, the receptor-binding subunit, centripetal movement of E1 to narrow the central cavity initiating the formation of an E1 trimer, and the extension of the E1 fusion sequence toward the target membrane.

DNA packaging orders the membrane of bacteriophage PRD1.

Bacteriophage PRD1 contains a linear dsDNA genome enclosed by a lipid membrane lying within a protein coat. Determination of the structure of the detergent‐treated particle to 2 nm by cryo‐electron microscopy and three‐dimensional reconstruction has defined the position of the major coat protein P3. The coat contains 240 copies of trimeric P3 packed into positions of local 6‐fold symmetry on a T = 25 lattice. The three‐dimensional structures of the PRD1 virion and a DNA packaging mutant to a resolution of 2.8 nm have revealed specific interactions between the coat and the underlying membrane. The membrane is clearly visible as two leaflets separated by 2 nm and spanned by transmembrane density. The size of the coat does not change upon DNA packaging. Instead, the number of interactions seen between the protein shell and the membrane and the order of the membrane components increase. Thus the membrane of PRD1 plays a role in assembly which is akin to that played by the nucleocapsid in other membrane viruses.

Electron Cryotomography of Tula Hantavirus Suggests a Unique Assembly Paradigm for Enveloped Viruses

ABSTRACT Hantaviruses (family Bunyaviridae) are rodent-borne emerging viruses that cause a serious, worldwide threat to human health. Hantavirus diseases include hemorrhagic fever with renal syndrome and hantavirus cardiopulmonary syndrome. Virions are enveloped and contain a tripartite single-stranded negative-sense RNA genome. Two types of glycoproteins, GN and GC, are embedded in the viral membrane and form protrusions, or “spikes.” The membrane encloses a ribonucleoprotein core, which consists of the RNA segments, the nucleocapsid protein, and the RNA-dependent RNA polymerase. Detailed information on hantavirus virion structure and glycoprotein spike composition is scarce. Here, we have studied the structures of Tula hantavirus virions using electron cryomicroscopy and tomography. Three-dimensional density maps show how the hantavirus surface glycoproteins, membrane, and ribonucleoprotein are organized. The structure of the GN-GC spike complex was solved to 3.6-nm resolution by averaging tomographic subvolumes. Each spike complex is a square-shaped assembly with 4-fold symmetry. Spike complexes formed ordered patches on the viral membrane by means of specific lateral interactions. These interactions may be sufficient for creating membrane curvature during virus budding. In conclusion, the structure and assembly principles of Tula hantavirus exemplify a unique assembly paradigm for enveloped viruses.

Insights into Virus Evolution and Membrane Biogenesis from the Structure of the Marine Lipid-Containing Bacteriophage PM2

Recent, primarily structural observations indicate that related viruses, harboring no sequence similarity, infect hosts of different domains of life. One such clade of viruses, defined by common capsid architecture and coat protein fold, is the so-called PRD1-adenovirus lineage. Here we report the structure of the marine lipid-containing bacteriophage PM2 determined by crystallographic analyses of the entire approximately 45 MDa virion and of the outer coat proteins P1 and P2, revealing PM2 to be a primeval member of the PRD1-adenovirus lineage with an icosahedral shell and canonical double beta barrel major coat protein. The view of the lipid bilayer, richly decorated with membrane proteins, constitutes a rare visualization of an in vivo membrane. The viral membrane proteins P3 and P6 are organized into a lattice, suggesting a possible assembly pathway to produce the mature virus.

Structure and host-cell interaction of SH1, a membrane-containing, halophilic euryarchaeal virus

The Archaea, and the viruses that infect them, are the least well understood of all of the three domains of life. They often grow in extreme conditions such as hypersaline lakes and sulfuric hot springs. Only rare glimpses have been gained into the structures of archaeal viruses. Here, we report the subnanometer resolution structure of a recently isolated, hypersalinic, membrane-containing, euryarchaeal virus, SH1, in which different viral proteins can be localized. The results indicate that SH1 has a complex capsid formed from single β-barrels, an important missing link in hypotheses on viral capsid protein evolution. Unusual, symmetry-mismatched spikes seem to play a role in host adsorption. They are connected to highly organized membrane proteins providing a platform for capsid assembly and potential machinery for host infection.

Combined EM/X-Ray Imaging Yields a Quasi-Atomic Model of the Adenovirus-Related Bacteriophage PRD1 and Shows Key Capsid and Membrane Interactions

BACKGROUNDnThe dsDNA bacteriophage PRD1 has a membrane inside its icosahedral capsid. While its large size (66 MDa) hinders the study of the complete virion at atomic resolution, a 1.65-A crystallographic structure of its major coat protein, P3, is available. Cryo-electron microscopy (cryo-EM) and three-dimensional reconstruction have shown the capsid at 20-28 A resolution. Striking architectural similarities between PRD1 and the mammalian adenovirus indicate a common ancestor.nnnRESULTSnThe P3 atomic structure has been fitted into improved cryo-EM reconstructions for three types of PRD1 particles: the wild-type virion, a packaging mutant without DNA, and a P3-shell lacking the membrane and the vertices. Establishing the absolute EM scale was crucial for an accurate match. The resulting quasi-atomic models of the capsid define the residues involved in the major P3 interactions, within the quasi-equivalent interfaces and with the membrane, and show how these are altered upon DNA packaging.nnnCONCLUSIONSnThe new cryo-EM reconstructions reveal the structure of the PRD1 vertex and the concentric packing of DNA. The capsid is essentially unchanged upon DNA packaging, with alterations limited to those P3 residues involved in membrane contacts. These are restricted to a few of the N termini along the icosahedral edges in the empty particle; DNA packaging leads to a 4-fold increase in the number of contacts, including almost all copies of the N terminus and the loop between the two beta barrels. Analysis of the P3 residues in each quasi-equivalent interface suggests two sites for minor proteins in the capsid edges, analogous to those in adenovirus.