Sean T. Hunt

Self-assembly of noble metal monolayers on transition metal carbide nanoparticle catalysts

Tough core-shell catalysts One approach for increasing the activity of precious metals in catalysis is to coat them onto less expensive earth-abundant transition metal cores such as nickel, but often these structures alloy and deactivate during reactions. Hunt et al. synthesized several types of transition metal carbide nanoparticles coated with atomically thin precious-metal shells. Titanium-doped tungsten carbide nanoparticles with platinum-ruthenium shells were highly active for methanol electrooxidation, stable over 10,000 cycles, and resistant to CO deactivation. Science, this issue p. 974 Transition metal carbide nanoparticles coated with noble metal monolayers resist CO poisoning during catalysis. We demonstrated the self-assembly of transition metal carbide nanoparticles coated with atomically thin noble metal monolayers by carburizing mixtures of noble metal salts and transition metal oxides encapsulated in removable silica templates. This approach allows for control of the final core-shell architecture, including particle size, monolayer coverage, and heterometallic composition. Carbon-supported Ti0.1W0.9C nanoparticles coated with Pt or bimetallic PtRu monolayers exhibited enhanced resistance to sintering and CO poisoning, achieving an order of magnitude increase in specific activity over commercial catalysts for methanol electrooxidation after 10,000 cycles. These core-shell materials provide a new direction to reduce the loading, enhance the activity, and increase the stability of noble metal catalysts.

sn-Beta zeolites with borate salts catalyse the epimerization of carbohydrates via an intramolecular carbon shift

Carbohydrate epimerization is an essential technology for the widespread production of rare sugars. In contrast to other enzymes, most epimerases are only active on sugars substituted with phosphate or nucleotide groups, thus drastically restricting their use. Here we show that Sn-Beta zeolite in the presence of sodium tetraborate catalyses the selective epimerization of aldoses in aqueous media. Specifically, a 5 wt% aldose (for example, glucose, xylose or arabinose) solution with a 4:1 aldose:sodium tetraborate molar ratio reacted with catalytic amounts of Sn-Beta yields near-equilibrium epimerization product distributions. The reaction proceeds by way of a 1,2 carbon shift wherein the bond between C-2 and C-3 is cleaved and a new bond between C-1 and C-3 is formed, with C-1 moving to the C-2 position with an inverted configuration. This work provides a general method of performing carbohydrate epimerizations that surmounts the main disadvantages of current enzymatic and inorganic processes.

Engineering Non‐sintered, Metal‐Terminated Tungsten Carbide Nanoparticles for Catalysis

Transition-metal carbides (TMCs) exhibit catalytic activities similar to platinum group metals (PGMs), yet TMCs are orders of magnitude more abundant and less expensive. However, current TMC synthesis methods lead to sintering, support degradation, and surface impurity deposition, ultimately precluding their wide-scale use as catalysts. A method is presented for the production of metal-terminated TMC nanoparticles in the 1-4 nm range with tunable size, composition, and crystal phase. Carbon-supported tungsten carbide (WC) and molybdenum tungsten carbide (Mo(x)W(1-x)C) nanoparticles are highly active and stable electrocatalysts. Specifically, activities and capacitances about 100-fold higher than commercial WC and within an order of magnitude of platinum-based catalysts are achieved for the hydrogen evolution and methanol electrooxidation reactions. This method opens an attractive avenue to replace PGMs in high energy density applications such as fuel cells and electrolyzers.

Activating earth-abundant electrocatalysts for efficient, low-cost hydrogen evolution/oxidation: sub-monolayer platinum coatings on titanium tungsten carbide nanoparticles

Most earth-abundant electrocatalysts suffer from negligible activity for the hydrogen oxidation reaction (HOR) and significant overpotentials for the hydrogen evolution reaction (HER) in acidic media. We designed earth-abundant, carbon-supported titanium tungsten carbide (TixW1−xC) nanoparticles decorated with surface Pt coatings ranging from the “single-atom” to the two-monolayer regime. Reactivity studies demonstrated that sub-monolayer Pt coverages are optimal and could activate the exposed metal carbide sites for both HER and HOR at low overpotentials. Specifically, a 0.25 monolayer coverage of Pt improved the exchange current density of Ti0.2W0.8C by more than three orders of magnitude. This catalyst outperformed traditional Pt/C by a factor of 13 on a Pt mass basis, allowing for over a 96% reduction in Pt loadings. Deactivation was not observed after 10 000 cycles between −50 and +600 mV vs. RHE in 1.0 M HClO4, and activity was maintained after 140 000 catalytic turnovers. A technoeconomic analysis revealed that over the catalyst lifetime, this new architecture could reduce materials and energy costs by a factor of 6 compared to state-of-the-art earth-abundant catalysts and a factor of 12 compared to Pt/C.

Transition Metal Nitride Core-Noble Metal Shell Nanoparticles as Highly CO Tolerant Catalysts

Core-shell architectures offer an effective way to tune and enhance the properties of noble-metal catalysts. Herein, we demonstrate the synthesis of Pt shell on titanium tungsten nitride core nanoparticles (Pt/TiWN) by high temperature ammonia nitridation of a parent core-shell carbide material (Pt/TiWC). X-ray photoelectron spectroscopy revealed significant core-level shifts for Pt shells supported on TiWN cores, corresponding to increased stabilization of the Pt valence d-states. The modulation of the electronic structure of the Pt shell by the nitride core translated into enhanced CO tolerance during hydrogen electrooxidation in the presence of CO. The ability to control shell coverage and vary the heterometallic composition of the shell and nitride core opens up attractive opportunities to synthesize a broad range of new materials with tunable catalytic properties.

Electrocatalytic Hydrogenation of Oxygenates using Earth-Abundant Transition-Metal Nanoparticles under Mild Conditions

Electrocatalytic hydrogenation (ECH) is a sustainable pathway for the synthesis of value-added organic compounds, provided affordable catalysts with high activity, selectivity and durability are developed. Here, we synthesize Cu/C, Ni/C, and CuNi/C nanoparticles and compare their performance to Pt/C, Ru/C, PtRu/C for the ECH of hydroxyacetone, a bio-derived feedstock surrogate containing a carbonyl and a hydroxyl functional group. The non-precious metal electrocatalysts show promising conversion-time behavior, product selectivities, and Faradaic efficiencies. Ni/C forms propylene glycol with a selectivity of 89 % (at 80 % conversion), while Cu/C catalyzes ECH (52 % selectivity) and hydrodeoxygenation (HDO, 48 % selectivity, accounting for evaporation). CuNi/C shows increased turnover frequencies but reduced ECH selectivity (80 % at 80 % conversion) as compared to the Ni/C catalyst. Importantly, stability studies show that the non-precious metal catalysts do not leach at operating conditions.

Reverse Microemulsion-mediated Synthesis of Monometallic and Bimetallic Early Transition Metal Carbide and Nitride Nanoparticles

A reverse microemulsion is used to encapsulate monometallic or bimetallic early transition metal oxide nanoparticles in microporous silica shells. The silica-encapsulated metal oxide nanoparticles are then carburized in a methane/hydrogen atmosphere at temperatures over 800 °C to form silica-encapsulated early transition metal carbide nanoparticles. During the carburization process, the silica shells prevent the sintering of adjacent carbide nanoparticles while also preventing the deposition of excess surface carbon. Alternatively, the silica-encapsulated metal oxide nanoparticles can be nitridized in an ammonia atmosphere at temperatures over 800 °C to form silica-encapsulated early transition metal nitride nanoparticles. By adjusting the reverse microemulsion parameters, the thickness of the silica shells, and the carburization/nitridation conditions, the transition metal carbide or nitride nanoparticles can be tuned to various sizes, compositions, and crystal phases. After carburization or nitridation, the silica shells are then removed using either a room-temperature aqueous ammonium bifluoride solution or a 0.1 to 0.5 M NaOH solution at 40-60 °C. While the silica shells are dissolving, a high surface area support, such as carbon black, can be added to these solutions to obtain supported early transition metal carbide or nitride nanoparticles. If no high surface area support is added, then the nanoparticles can be stored as a nanodispersion or centrifuged to obtain a nanopowder.

Principles and Methods for the Rational Design of Core–Shell Nanoparticle Catalysts with Ultralow Noble Metal Loadings

Conspecuts Commercial and emerging renewable energy technologies are underpinned by precious metal catalysts, which enable the transformation of reactants into useful products. However, the noble metals (NMs) comprise the least abundant elements in the lithosphere, making them prohibitively scarce and expensive for future global-scale technologies. As such, intense research efforts have been devoted to eliminating or substantially reducing the loadings of NMs in various catalytic applications. These efforts have resulted in a plethora of heterogeneous NM catalyst morphologies beyond the traditional supported spherical nanoparticle. In many of these new architectures, such as shaped, high index, and bimetallic particles, less than 20% of the loaded NMs are available to perform catalytic turnovers. The majority of NM atoms are subsurface, providing only a secondary catalytic role through geometric and ligand effects with the active surface NM atoms. A handful of architectures can approach 100% NM utilization, but severe drawbacks limit general applicability. For example, in addition to problems with stability and leaching, single atom and ultrasmall cluster catalysts have extreme metal-support interactions, discretized d-bands, and a lack of adjacent NM surface sites. While monolayer thin films do not possess these features, they exhibit such low surface areas that they are not commercially relevant, serving predominantly as model catalysts. This Account champions core-shell nanoparticles (CS NPs) as a vehicle to design highly active, stable, and low-cost materials with high NM utilization for both thermo- and electrocatalysis. The unique benefits of the many emerging NM architectures could be preserved while their fundamental limitations could be overcome through reformulation via a core-shell morphology. However, the commercial realization of CS NPs remains challenging, requiring concerted advances in theory and manufacturing. We begin by formulating seven constraints governing proper core material design, which naturally point to early transition metal ceramics as suitable core candidates. Two constraints prove extremely challenging. The first relates to the core modifying the shell work function and d-band. To properly investigate materials that could satisfy this constraint, we discuss our development of a new heat, quench, and exfoliation (HQE) density functional theory (DFT) technique to model heterometallic interfaces. This technique is used to predict how transition metal carbides can favorably tune the catalytic properties of various NM monolayer shell configurations. The second challenging constraint relates to the scalable manufacturing of CS NP architectures with independent synthetic control of the thickness and composition of the shell and the size and composition of the core. We discuss our development of a synthetic method that enables high temperature self-assembly of tunable CS NP configurations. Finally, we discuss how these principles and methods were used to design catalysts for a variety of applications. These include the design of a thermally stable sub-monolayer CS catalyst, a highly active methanol electrooxidation catalyst, CO-tolerant Pt catalysts, and a hydrogen evolution catalyst that is less expensive than state-of-the-art NM-free catalysts. Such core-shell architectures offer the promise of ultralow precious metal loadings while ceramic cores hold the promise of thermodynamic stability and access to unique catalytic activity/tunability.