Sefaattin Tongay

Band offsets and heterostructures of two-dimensional semiconductors

The band offsets and heterostructures of monolayer and few-layer transition-metal dichalcogenides MX2 (M = Mo, W; X = S, Se, Te) are investigated from first principles calculations. The band alignments between different MX2 monolayers are calculated using the vacuum level as reference, and a simple model is proposed to explain the observed chemical trends. Some of the monolayers and their heterostructures show band alignments suitable for potential applications in spontaneous water splitting, photovoltaics, and optoelectronics. The strong dependence of the band offset on the number of layers also implicates a possible way of patterning quantum structures with thickness engineering.

Ultrafast charge transfer in atomically thin MoS2/WS2 heterostructures

Van der Waals heterostructures have recently emerged as a new class of materials, where quantum coupling between stacked atomically thin two-dimensional layers, including graphene, hexagonal-boron nitride and transition-metal dichalcogenides (MX2), give rise to fascinating new phenomena. MX2 heterostructures are particularly exciting for novel optoelectronic and photovoltaic applications, because two-dimensional MX2 monolayers can have an optical bandgap in the near-infrared to visible spectral range and exhibit extremely strong light-matter interactions. Theory predicts that many stacked MX2 heterostructures form type II semiconductor heterojunctions that facilitate efficient electron-hole separation for light detection and harvesting. Here, we report the first experimental observation of ultrafast charge transfer in photoexcited MoS2/WS2 heterostructures using both photoluminescence mapping and femtosecond pump-probe spectroscopy. We show that hole transfer from the MoS2 layer to the WS2 layer takes place within 50 fs after optical excitation, a remarkable rate for van der Waals coupled two-dimensional layers. Such ultrafast charge transfer in van der Waals heterostructures can enable novel two-dimensional devices for optoelectronics and light harvesting.

Thermally Driven Crossover from Indirect toward Direct Bandgap in 2D Semiconductors: MoSe2 versus MoS2

Layered semiconductors based on transition-metal chalcogenides usually cross from indirect bandgap in the bulk limit over to direct bandgap in the quantum (2D) limit. Such a crossover can be achieved by peeling off a multilayer sample to a single layer. For exploration of physical behavior and device applications, it is much desired to reversibly modulate such crossover in a multilayer sample. Here we demonstrate that, in a few-layer sample where the indirect bandgap and direct bandgap are nearly degenerate, the temperature rise can effectively drive the system toward the 2D limit by thermally decoupling neighboring layers via interlayer thermal expansion. Such a situation is realized in few-layer MoSe(2), which shows stark contrast from the well-explored MoS(2) where the indirect and direct bandgaps are far from degenerate. Photoluminescence of few-layer MoSe(2) is much enhanced with the temperature rise, much like the way that the photoluminescence is enhanced due to the bandgap crossover going from the bulk to the quantum limit, offering potential applications involving external modulation of optical properties in 2D semiconductors. The direct bandgap of MoSe(2), identified at 1.55 eV, may also promise applications in energy conversion involving solar spectrum, as it is close to the optimal bandgap value of single-junction solar cells and photoelechemical devices.

High Efficiency Graphene Solar Cells by Chemical Doping

We demonstrate single layer graphene/n-Si Schottky junction solar cells that under AM1.5 illumination exhibit a power conversion efficiency (PCE) of 8.6%. This performance, achieved by doping the graphene with bis(trifluoromethanesulfonyl)amide, exceeds the native (undoped) device performance by a factor of 4.5 and is the highest PCE reported for graphene-based solar cells to date. Current-voltage, capacitance-voltage, and external quantum efficiency measurements show the enhancement to be due to the doping-induced shift in the graphene chemical potential that increases the graphene carrier density (decreasing the cell series resistance) and increases the cells built-in potential (increasing the open circuit voltage) both of which improve the solar cell fill factor.

Defects activated photoluminescence in two-dimensional semiconductors: interplay between bound, charged, and free excitons

Point defects in semiconductors can trap free charge carriers and localize excitons. The interaction between these defects and charge carriers becomes stronger at reduced dimensionalities, and is expected to greatly influence physical properties of the hosting material. We investigated effects of anion vacancies in monolayer transition metal dichalcogenides as two-dimensional (2D) semiconductors where the vacancies density is controlled by α-particle irradiation or thermal-annealing. We found a new, sub-bandgap emission peak as well as increase in overall photoluminescence intensity as a result of the vacancy generation. Interestingly, these effects are absent when measured in vacuum. We conclude that in opposite to conventional wisdom, optical quality at room temperature cannot be used as criteria to assess crystal quality of the 2D semiconductors. Our results not only shed light on defect and exciton physics of 2D semiconductors, but also offer a new route toward tailoring optical properties of 2D semiconductors by defect engineering.

Monolayer behaviour in bulk ReS 2 due to electronic and vibrational decoupling

Semiconducting transition metal dichalcogenides consist of monolayers held together by weak forces where the layers are electronically and vibrationally coupled. Isolated monolayers show changes in electronic structure and lattice vibration energies, including a transition from indirect to direct bandgap. Here we present a new member of the family, rhenium disulphide (ReS2), where such variation is absent and bulk behaves as electronically and vibrationally decoupled monolayers stacked together. From bulk to monolayers, ReS2 remains direct bandgap and its Raman spectrum shows no dependence on the number of layers. Interlayer decoupling is further demonstrated by the insensitivity of the optical absorption and Raman spectrum to interlayer distance modulated by hydrostatic pressure. Theoretical calculations attribute the decoupling to Peierls distortion of the 1T structure of ReS2, which prevents ordered stacking and minimizes the interlayer overlap of wavefunctions. Such vanishing interlayer coupling enables probing of two-dimensional-like systems without the need for monolayers.

Tuning Interlayer Coupling in Large-Area Heterostructures with CVD-Grown MoS2 and WS2 Monolayers

Band offsets between different monolayer transition metal dichalcogenides are expected to efficiently separate charge carriers or rectify charge flow, offering a mechanism for designing atomically thin devices and probing exotic two-dimensional physics. However, developing such large-area heterostructures has been hampered by challenges in synthesis of monolayers and effectively coupling neighboring layers. Here, we demonstrate large-area (>tens of micrometers) heterostructures of CVD-grown WS2 and MoS2 monolayers, where the interlayer interaction is externally tuned from noncoupling to strong coupling. Following this trend, the luminescence spectrum of the heterostructures evolves from an additive line profile where each layer contributes independently to a new profile that is dictated by charge transfer and band normalization between the WS2 and MoS2 layers. These results and findings open up venues to creating new material systems with rich functionalities and novel physical effects.

Anomalous Raman spectra and thickness-dependent electronic properties of WSe2

Typical Raman spectra of transition metal dichalcogenides (TMDs) display two prominent peaks, E2g and A1g, that are well separated from each other. We find that these modes are degenerate in bulk WSe2 yielding one single Raman peak. As the dimensionality is lowered, the observed peak splits in two as a result of broken degeneracy. In contrast to our experimental findings, our phonon dispersion calculations reveal that these modes remain degenerate independent of the number of layers. Interestingly, for minuscule biaxial strain the degeneracy is preserved but once the crystal symmetry is broken by uniaxial strain, the degeneracy is lifted. Our calculated phonon dispersion for uniaxially strained WSe2 shows a perfect match to the measured Raman spectrum which suggests that uniaxial strain exists in WSe2 flakes possibly induced during the sample preparation and/or as a result of interaction between WSe2 and the substrate. Furthermore, we find that WSe2 undergoes an indirect to direct bandgap transition from bulk to monolayers which is ubiquitous for semiconducting TMDs. These results not only allow us to understand the vibrational properties of WSe2 but also provides detailed insight to their physical properties.

Doping against the Native Propensity of MoS2: Degenerate Hole Doping by Cation Substitution

Layered transition metal dichalcogenides (TMDs) draw much attention as the key semiconducting material for two-dimensional electrical, optoelectronic, and spintronic devices. For most of these applications, both n- and p-type materials are needed to form junctions and support bipolar carrier conduction. However, typically only one type of doping is stable for a particular TMD. For example, molybdenum disulfide (MoS2) is natively an n-type presumably due to omnipresent electron-donating sulfur vacancies, and stable/controllable p-type doping has not been achieved. The lack of p-type doping hampers the development of charge-splitting p-n junctions of MoS2, as well as limits carrier conduction to spin-degenerate conduction bands instead of the more interesting, spin-polarized valence bands. Traditionally, extrinsic p-type doping in TMDs has been approached with surface adsorption or intercalation of electron-accepting molecules. However, practically stable doping requires substitution of host atoms with dopants where the doping is secured by covalent bonding. In this work, we demonstrate stable p-type conduction in MoS2 by substitutional niobium (Nb) doping, leading to a degenerate hole density of ∼ 3 × 10(19) cm(-3). Structural and X-ray techniques reveal that the Nb atoms are indeed substitutionally incorporated into MoS2 by replacing the Mo cations in the host lattice. van der Waals p-n homojunctions based on vertically stacked MoS2 layers are fabricated, which enable gate-tunable current rectification. A wide range of microelectronic, optoelectronic, and spintronic devices can be envisioned from the demonstrated substitutional bipolar doping of MoS2. From the miscibility of dopants with the host, it is also expected that the synthesis technique demonstrated here can be generally extended to other TMDs for doping against their native unipolar propensity.

Scalable enhancement of graphene oxide properties by thermally driven phase transformation

Chemical functionalization of graphene is promising for a variety of next-generation technologies. Although graphene oxide (GO) is a versatile material in this direction, its use is limited by the production of metastable, chemically inhomogeneous and spatially disordered GO structures under current synthetic protocols, which results in poor optoelectronic properties. Here, we present a mild thermal annealing procedure, with no chemical treatments involved, to manipulate as-synthesized GO on a large scale to enhance sheet properties with the oxygen content preserved. Using experiments supported by atomistic calculations, we demonstrate that GO structures undergo a phase transformation into prominent oxidized and graphitic domains by temperature-driven oxygen diffusion. Consequently, as-synthesized GO that absorbs mainly in the ultraviolet region becomes strongly absorbing in the visible region, photoluminescence is blue shifted and electronic conductivity increases by up to four orders of magnitude. Our thermal processing method offers a suitable way to tune and enhance the properties of GO, which creates opportunities for various applications.