Sehyun Seong

Novel orthogonal velocity polishing tool and its material removal characteristics from CVD SiC mirror surfaces

A new and patented polishing tool called Orthogonal Velocity field Tool (OVT) was built and its material removal characteristics from Chemical Vapor Deposition Silicon Carbide (CVD SiC) mirror surfaces were investigated in this study. The velocity field of OVT is produced by rotating the bicycle type tool in the two orthogonal axes, and this concept is capable of producing a material removal foot print of pseudo Gaussian shapes. First for the OVT characterization, we derived a theoretical material removal model using distributions of pressure exerted onto the workpiece surface, relative speed between the tool and workpiece surface, and dwell time inside the tool- workpiece contact area. Second, using two flat CVD SiC mirrors that are 150 mm in diameter, we ran material removal experiments over machine run parameter ranging from 12.901 to 25.867 psi in pressure, from 0.086 m/sec to 0.147 m/sec tool in the relative speed, and 5 to 15 sec in dwell time. Material removal coefficients are obtained by using the in-house developed data analysis program. The resulting material removal coefficient varies from 3.35 to 9.46 um/psi hour m/sec with a mean value of 5.90 ± 1.26(standard deviation). We describe the technical details of the new OVT machine, the data analysis program, the experiments, and the results together with the implications to the future development of the machine.

Integrated ray tracing simulation of annual variation of spectral bio-signatures from cloud free 3D optical Earth model

Understanding the Earth spectral bio-signatures provides an important reference datum for accurate de-convolution of collapsed spectral signals from potential earth-like planets of other star systems. This study presents a new ray tracing computation method including an improved 3D optical earth model constructed with the coastal line and vegetation distribution data from the Global Ecological Zone (GEZ) map. Using non-Lambertian bidirectional scattering distribution function (BSDF) models, the input earth surface model is characterized with three different scattering properties and their annual variations depending on monthly changes in vegetation distribution, sea ice coverage and illumination angle. The input atmosphere model consists of one layer with Rayleigh scattering model from the sea level to 100 km in altitude and its radiative transfer characteristics is computed for four seasons using the SMART codes. The ocean scattering model is a combination of sun-glint scattering and Lambertian scattering models. The land surface scattering is defined with the semi empirical parametric kernel method used for MODIS and POLDER missions. These three component models were integrated into the final Earth model that was then incorporated into the in-house built integrated ray tracing (IRT) model capable of computing both spectral imaging and radiative transfer performance of a hypothetical space instrument as it observes the Earth from its designated orbit. The IRT model simulation inputs include variation in earth orientation, illuminated phases, and seasonal sea ice and vegetation distribution. The trial simulation runs result in the annual variations in phase dependent disk averaged spectra (DAS) and its associated bio-signatures such as NDVI. The full computational details are presented together with the resulting annual variation in DAS and its associated bio-signatures.

Imaging and radiometric performance simulation for a new high-performance dual-band airborne reconnaissance camera

In recent years, high performance visible and IR cameras have been used widely for tactical airborne reconnaissance. The process improvement for efficient discrimination and analysis of complex target information from active battlefields requires for simultaneous multi-band measurement from airborne platforms at various altitudes. We report a new dual band airborne camera designed for simultaneous registration of both visible and IR imagery from mid-altitude ranges. The camera design uses a common front end optical telescope of around 0.3m in entrance aperture and several relay optical sub-systems capable of delivering both high spatial resolution visible and IR images to the detectors. The camera design is benefited from the use of several optical channels packaged in a compact space and the associated freedom to choose between wide (~3 degrees) and narrow (~1 degree) field of view. In order to investigate both imaging and radiometric performances of the camera, we generated an array of target scenes with optical properties such as reflection, refraction, scattering, transmission and emission. We then combined the target scenes and the camera optical system into the integrated ray tracing simulation environment utilizing Monte Carlo computation technique. Taking realistic atmospheric radiative transfer characteristics into account, both imaging and radiometric performances were then investigated. The simulation results demonstrate successfully that the camera design satisfies NIIRS 7 detection criterion. The camera concept, details of performance simulation computation, the resulting performances are discussed together with future development plan.

Integrated ray tracing simulation of spectral bio-signatures from full 3D earth model

Accurate identification and understanding of spectral bio-signatures from possible extra terrestrial planets have received an ever increasing attention from both astronomy and space science communities in recent years. In pursuance of this subject, one of the most important scientific breakthroughs would be to obtain the detailed understanding on spectral biosignatures of the Earth, as it serves as a reference datum for accurate interpretation of collapsed (in temporal and spatial domains) information from the spectral measurement using TPF instruments. We report a new Integrated Ray Tracing (IRT) model capable of computing various spectral bio-signatures as they are observed from the Earth surface. The model includes the Sun, the full 3-D Earth, and an optical instrument, all combined into single ray tracing environment in real scale. In particular, the full 3-D Earth surface is constructed from high resolution coastal line data and defined with realistic reflectance and BSDF characteristics depending on wavelength, vegetation types and their distributions. We first examined the model validity by confirming the imaging and radiometric performance of the AmonRa visible channel camera, simulating the Earth observation from the L1 halo orbit. We then computed disk averaged spectra, light curves and NDVI indexes, leading to the construction of the observed disk averaged spectra at the AmonRa instrument detector plane. The model, computational procedure and the simulation results are presented. The future plan for the detailed spectral signature simulation runs for various input conditions including seasonal vegetation changes and variable cloud covers is discussed.

Improved atmospheric 3D BSDF model in earthlike exoplanet using ray-tracing based method

The studies on planetary radiative transfer computation have become important elements to disk-averaged spectral characterization of potential exoplanets. In this paper, we report an improved ray-tracing based atmospheric simulation model as a part of 3-D earth-like planet model with 3 principle sub-components i.e. land, sea and atmosphere. Any changes in ray paths and their characteristics such as radiative power and direction are computed as they experience reflection, refraction, transmission, absorption and scattering. Improved atmospheric BSDF algorithms uses Q.Lius combined Rayleigh and aerosol Henrey-Greenstein scattering phase function. The input cloud-free atmosphere model consists of 48 layers with vertical absorption profiles and a scattering layer with their input characteristics using the GIOVANNI database. Total Solar Irradiance data are obtained from Solar Radiation and Climate Experiment (SORCE) mission. Using aerosol scattering computation, we first tested the atmospheric scattering effects with imaging simulation with HRIV, EPOXI. Then we examined the computational validity of atmospheric model with the measurements of global, direct and diffuse radiation taken from NREL(National Renewable Energy Laboratory)s pyranometers and pyrheliometers on a ground station for cases of single incident angle and for simultaneous multiple incident angles of the solar beam.

Material removal characteristics of orthogonal velocity polishing tool for efficient fabrication of CVD SiC mirror surfaces

Today, CVD SiC mirrors are readily available in the market. However, it is well known to the community that the key surface fabrication processes and, in particular, the material removal characteristics of the CVD SiC mirror surface varies sensitively depending on the shop floor polishing and figuring variables. We investigated the material removal characteristics of CVD SiC mirror surfaces using a new and patented polishing tool called orthogonal velocity tool (OVT) that employs two orthogonal velocity fields generated simultaneously during polishing and figuring machine runs. We built an in-house OVT machine and its operating principle allows for generation of pseudo Gaussian shapes of material removal from the target surface. The shapes are very similar to the tool influence functions (TIFs) of other polishing machine such as IRP series polishing machines from Zeeko. Using two CVD SiC mirrors of 150 mm in diameter and flat surface, we ran trial material removal experiments over the machine run parameter ranges from 12.901 to 25.867 psi in pressure, 0.086 m/sec to 0.147 m/sec in tool linear velocity, and 5 to 15 sec in dwell time. An in-house developed data analysis program was used to obtain a number of Gaussian shaped TIFs and the resulting material removal coefficient varies from 3.35 to 9.46 um/psi hour m/sec with the mean value to 5.90 ± 1.26(standard deviation). We report the technical details of the new OVT machine, of the data analysis program, of the experiments and the results together with the implications to the future development of the OVT machine and process for large CVD SiC mirror surfaces.

Laboratory test simulation for non-flat response calibration of global Earth albedo monitor

In this report, we present laboratory test simulation for directional responsivity of a global Earth albedo monitoring instrument. The sensor is to observe the Sun and the Earth, alternately, and measure their shortwave (<4μm) radiations around the L1 halo orbit to obtain global Earth albedo. The instrument consists of a broadband scanning radiometer (energy channel instrument) and an imager (visible channel instrument) with ±2° field-of-view. In the case of the energy channel instrument, radiations arriving at the viewing ports from the Sun and the Earth are directed toward the pyroelectric detector via two spherical folding mirrors and a 3D compound parabolic concentrator (CPC). The instrument responsivity is defined by the ratio of the incident radiation input to the instrument output signal. The radiometer’s relative directional responsivity needs to be characterized across the field-of-view to assist output signal calibration. For the laboratory test, the distant small source configuration consists of an off-axis collimator and the instrument with adjustable mounts. Using reconstructed 3D CPC surface, the laboratory test simulation for predicting the instrument directional responsivity was conducted by a radiative transfer computation with ray tracing technique. The technical details of the laboratory test simulation are presented together with future plan.

Ray tracing simulation of aero-optical effect using multiple gradient index layer

We present a new ray tracing simulation of aero-optical effect through anisotropic inhomogeneous media as supersonic flow field surrounds a projectile. The new method uses multiple gradient-index (GRIN) layers for construction of the anisotropic inhomogeneous media and ray tracing simulation. The cone-shaped projectile studied has 19° semi-vertical angle; a sapphire window is parallel to the cone angle; and an optical system of the projectile was assumed via paraxial optics and infrared image detector. The condition for the steady-state solver conducted through computational fluid dynamics (CFD) included Mach numbers 4 and 6 in speed, 25 km altitude, and 0° angle of attack (AoA). The grid refractive index of the flow field via CFD analysis and Gladstone-Dale relation was discretized into equally spaced layers which are parallel with the projectile’s window. Each layer was modeled as a form of 2D polynomial by fitting the refractive index distribution. The light source of ray set generated 3,228 rays for varying line of sight (LOS) from 10° to 40°. Ray tracing simulation adopted the Snell’s law in 3D to compute the paths of skew rays in the GRIN layers. The results show that optical path difference (OPD) and boresight error (BSE) decreases exponentially as LOS increases. The variation of refractive index decreases, as the speed of flow field increases the OPD and its rate of decay at Mach number 6 in speed has somewhat larger value than at Mach number 4 in speed. Compared with the ray equation method, at Mach number 4 and 10° LOS, the new method shows good agreement, generated 0.33% of relative root-mean-square (RMS) OPD difference and 0.22% of relative BSE difference. Moreover, the simulation time of the new method was more than 20,000 times faster than the conventional ray equation method. The technical detail of the new method and simulation is presented with results and implication.

A new ray tracing model for aero-optical effect simulation of laminar flow field surrounding highly supersonic projectile with cone shape head

We present the apparent optical performance variation of an infrared sensor caused by laminar flow field surrounding a highly supersonic projectile with cone shape head. An optical ray tracing model was constructed and numerical simulations of the aero-optical effects were performed by computational fluid dynamics (CFD) analysis and isodensity surface based ray tracing computation. To maximize modeling and computation efficiency, the number of sampling isodensity layers was reduced to less than 5 for improved discretization of the inhomogeneous gradient index (GRIN) media. Using this method, the simulation results show that the BSE is smaller than about 2.8 arcsec when the projectile flies at 25, 35, 50 km in altitude, Mach 4, 6 in speed, and 0°, 10° in angle of attack. The technical details and implications of the optical ray tracing model are presented together with the simulation results.

Performance simulation model for a new MWIR camera for missile plume detection

We report realistic performance simulation results for a new MWIR camera. It is designed for early detection of long distance missile plumes over few hundreds kilometer in the distance range. The camera design uses a number of refractive optical element and a IR detector. Both imaging and radiometric performance of the camera are investigated by using large scale ray tracing including targets and background scene models. Missile plume radiance was calculated from using CFD type radiative transfer algorithm and used as the light source for ray tracing computation. The atmospheric background was estimated using MODTRAN utilizing path thermal radiance, single/multiple scattered radiance and transmittance. The ray tracing simulation results demonstrate that the camera would satisfy the imaging and radiometric performance requirements in field operation at the target MWIR band.