Sema Çalış

Diclofenac sodium incorporated PLGA (50:50) microspheres: formulation considerations and in vitro/in vivo evaluation.

Recently, considerable interest has been focused on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug-delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. Poly (lactide-co-glycolide) (PLGA) polymers have been proven to be excellent drug carriers for microparticulate systems due to their advantages, e.g. biocompatibility and regulatory approval. The administration of nonsteroidal anti-inflammatory drugs (NSAIDs) into the intra-articular cavity in patients with chronic inflammatory disease is complicated due to the short duration of effect. In the present study, controlled-release parenteral formulations of diclofenac sodium (DS), a commonly used NSAID, were prepared for intra-articular administration, and evaluated in vitro for particle size, yield, drug loading, surface morphology and release characteristics. For in vivo studies, Technetium-99m labelled polyclonal human immunogammaglobulin (99m Tc-HIG) was used as the radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post-therapy in rabbits showed no significant difference in the group treated with PLGA (50:50) (mw 34000) DS microspheres compared to control groups.

In vitro and in vivo evaluation of diclofenac sodium loaded albumin microspheres

The use of polymeric carriers in formulations of therapeutic drug delivery systems has gained widespread application, due to their advantage of being biodegradable and biocompatible. Among the microparticulate systems, microspheres have a special importance since it is possible to target drugs and provide controlled release. Diclofenac sodium (DS), is a potent drug in the NSAID group having non-steroidal, anti-inflammatory properties, and is widely used in the treatment of rheumatoid arthritis, osteoarthritis and ankylosing spondylitis. In this present study, it was aimed to prepare microsphere formulations of DS using a natural biodegradable polymer as a carrier for intraarticular administration to extend the duration period of the dosage form in the knee joint. Microsphere formulations of DS which were prepared were evaluated in vitro for particle size, yield value, encapsulation efficiency, surface morphology, and in vitro drug release. Two appropriate formulations were selected for in vivo trials. For the in vivo studies, Technetium-99m labelled polyclonal human immunogammaglobulin (99mTc-HIG) was used as the radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. After the induction of arthritis in knee joints of rabbits, the radio-labelled microspheres loaded with DS were injected directly into the articular cavity and at specific time points gamma scintigrams were obtained to find the residence time of the microspheres in knee joints in order to determine the most suitable formulation.The use of polymeric carriers in formulations of therapeutic drug delivery systems has gained widespread application, due to their advantage of being biodegradable and biocompatible. Among the microparticulate systems, microspheres have a special importance since it is possible to target drugs and provide controlled release. Diclofenac sodium (DS), is a potent drug in the NSAID group having non-steroidal, anti-inflammatory properties, and is widely used in the treatment of rheumatoid arthritis, osteoarthritis and ankylosing spondylitis. In this present study, it was aimed to prepare microsphere formulations of DS using a natural biodegradable polymer as a carrier for intraarticular administration to extend the duration period of the dosage form in the knee joint. Microsphere formulations of DS which were prepared were evaluated in vitro for particle size, yield value, encapsulation efficiency, surface morphology, and in vitro drug release. Two appropriate formulations were selected for in vivo trials. For the in vivo studies, Technetium-99m labelled polyclonal human immunogammaglobulin (99mTc-HIG) was used as the radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. After the induction of arthritis in knee joints of rabbits, the radio-labelled microspheres loaded with DS were injected directly into the articular cavity and at specific time points gamma scintigrams were obtained to find the residence time of the microspheres in knee joints in order to determine the most suitable formulation.

Comparative evaluation of polymeric and amphiphilic cyclodextrin nanoparticles for effective camptothecin delivery

Camptothecin (CPT) is a potent anticancer agent. The clinical application of CPT is restricted by poor water solubility and instability under physiological conditions. Solubilization and stabilization of CPT were realized through nanoparticulate systems of amphiphilic cyclodextrins, poly(lactide-co-glycolide) (PLGA) or poly-epsilon-caprolactone (PCL). Nanoparticles were prepared with nanoprecipitation technique, whereas cyclodextrin nanoparticles were prepared from preformed inclusion complexes of CPT with amphiphilic cyclodextrins. Polymeric nanoparticles, on the other hand, were loaded with CPT:HP-beta-CD inclusion complex to solubilize and stabilize the drug. Mean particle sizes were under 275 nm, and polydispersity indices were lower than 0.2 for all formulations. Drug-loading values were significantly higher for amphiphilic cyclodextrin nanoparticles when compared with those for PLGA and PCL nanoparticles. Nanoparticle formulations showed a significant controlled release profile extended up to 12 days for amphiphilic cyclodextrin nanoparticles and 48h for polymeric nanoparticles. Anticancer efficacy of the nanoparticles was evaluated in comparison with CPT solution in dimethyl sulfoxide (DMSO) on MCF-7 breast adenocarcinoma cells. Amphiphilic cyclodextrin nanoparticles showed higher anticancer efficacy than PLGA or PCL nanoparticles loaded with CPT and the CPT solution in DMSO. These results indicated that CPT-loaded amphiphilic cyclodextrin nanoparticles might provide a promising carrier system for the effective delivery of this anticancer drug having bioavailability problems.

Adsorption of salmon calcitonin to PLGA microspheres

AbstractPurpose. The interaction of salmon calcitonin (sCT) and poly (d,l-lactide-co-glycolide) was detected during preparation and evaluation of microspheres. The purpose of this study was to quantitate the extent and nature of the interaction. Methods. Blank microspheres were prepared by an aqueous emulsification solvent extraction technique. Adsorption studies were carried out at six concentrations of sCT and three concentrations of microspheres. Adsorption isotherms were constructed using the Langmuir and Freundlich treatments. Results. Adsorption at 1 mg/ml sCT concentration resulted in almost complete depletion of the peptide from the adsorption medium with the time to reach maximum adsorption decreasing with increasing microsphere concentration. At sCT concentrations below 100 µg/ml, a true equilibrium occurred in 1 hour or less while at higher concentrations (up to 350 µg/ml), a transient equilibrium was reached in 1 to 2 hours, followed by further adsorption of the peptide. The adsorption followed the Langmuir isotherm at concentrations below 200 µg/ml, indicating formation of a monolayer. Multilayer interaction, described by the Freundlich isotherm, occurred at higher concentrations and resulted in complete depletion of sCT from the adsorption medium. The affinity constant during monolayer formation was 0.09 and the plateau surface concentration was 5.1 µg/mg. The multilayer peptide-peptide adsorption showed a lower affinity (0.025) but higher capacity (24 µg/mg) than the monolayer peptide-polymer adsorption. Conclusions. The results show that poly (d,l-lactide-co-glycolide) microspheres have a high adsorption capacity for sCT which must be considered in formulating a controlled delivery product of this peptide.

In vitro and in vivo studies of ibuprofen-loaded biodegradable alginate beads

The irritation effects of ibuprofen, a widely used non-steroidal anti-inflammatory drug (NSAID), were evaluated on mouse gastric and duodenal mucosa when suspended in 0.5% (w/v) sodiumcarboxymethylcellulose (NaCMC) solution and loaded in alginate beads. The ionotropic gelation method was used to prepare controlled release alginate beads of ibuprofen. The influence of various formulation factors on the encapsulation efficiency, as in vitro drug release and micromeritic properties, was investigated. Other variables included the alginate concentration, percentage drug loading and stirring speed during the microencapsulation process. Scanning electron micrographs of alginate beads loaded with ibuprofen showed rough surface morphology and particle sizes in the range of 1.15 ± 0.4–3.15 ± 0.6 mm. The yield of microspheres, as collected after drying, was generally 80–90%. Formulation code H showing t50% value of 3.5 h was chosen for in vivo trials because of the appropriate drug release properties. For in vivo trials, free ibuprofen (100 mg kg−1), blank and ibuprofen (100 mg kg−1) loaded alginate beads (formulation code H) were suspended in 0.5% (w/v) NaCMC solution and each group was given to six mice orally by gavage. NaCMC solution was used as a control in experimental studies. In vivo data showed that the administration of ibuprofen in alginate beads prevented the gastric lesions.

5-Fluorouracil encapsulated alginate beads for the treatment of breast cancer

Alginate beads containing 5-fluorouracil (5-FU) were prepared by the gelation of alginate with calcium cations. Alginate beads loaded with 5-FU were prepared at 1.0 and 2.0% (w/v) polymers. The effect of polymer concentration and the drug loading (1.0, 5.0 and 10%) on the release profile of 5-FU was investigated. As the drug load increased, larger beads were obtained in which the resultant beads contained higher 5-FU content. The encapsulation efficiencies obtained for 5-FU loads of 1.0, 5.0 and 10% (w/v) were 3.5, 7.4 and 10%, respectively. Scanning electron microscopy (SEM) and particle size analysis revealed differences between the formulations as to their appearance and size distribution. The amount of 5-FU released from the alginate beads increased with decreasing alginate concentrations.

In vitro evaluation and intra-articular administration of biodegradable microspheres containing naproxen sodium

The dispersion of non-steroidal antiinflammatory drugs (NSAIDs) into biodegradable polymeric matrices have been accepted as a good approach for obtaining a therapeutic effect in a predetermined period of time meanwhile minimizing the side effects of NSAIDs. In the present study, it was aimed to prepare Naproxen Sodium (NS), (a NSAID) loaded microsphere formulation using natural Bovine Serum Albumin (BSA) and synthetic biodegradable polymers such as poly(lactide-co-glycolic acid) (PLGA) (50:50 MW 34,000 and 88,000 Da) for intra-articular administration, and to study the retention of the drug at the site of injection in the knee joint. NS incorporated microspheres were evaluated in vitro for particle size (the mean particle size; for BSA microspheres, 10.0 +/- 0.3 microm, for PLGA microspheres, 9.0 +/- 0.2 and 5.0 +/- 0.1 microm for MW 34,000 and 88,000 Da, respectively), yield value, drug loading, surface morphology and drug release. For in vivo studies, monoarticular arthritis was induced in the left knee joints of rabbits by using ovalbumin and Freunds Complete Adjuvant as antigen and adjuvant. A certain time (4 days) is allowed for the formation of arthritis in the knee joints, then the NS loaded microspheres were injected directly into the articular cavity. At specific time points, gamma scintigrams were obtained to determine the residence time of the microspheres in knee joints, in order to determine the most suitable formulation. This study indicated that PLGA, a synthetic polymer, is more promising than the natural type BSA microspheres for an effective cure of mono-articular arthritis in rabbits.

Antitumoral activity of camptothecin-loaded nanoparticles in 9L rat glioma model

Camptothecin (CPT), a plant alkaloid, is a potent anticancer drug in cell culture studies but it is clinically inactive due to rapid hydrolysis under physiological conditions. The drug exists in two forms depending on the pH value, an active lactone form at pH below 5 and an inactive carboxylate form at basic pH and this is a reversible reaction. In this study, nanoparticulate delivery systems were developed with either amphiphilic cyclodextrins, poly(lactide-co-glycolide) or poly-ɛ-caprolactone in order to maintain the active lactone form and prevent the drug from hydrolysis. All nanoparticles were prepared with nanoprecipitation technique. Mean particle sizes were 130-280nm and surface charges were negative. The encapsulation efficiency was significantly higher for amphiphilic cyclodextrin nanoparticles when compared to polymeric nanoparticles. Nanoparticle formulations based on cyclodextrins showed a controlled release profile extended up to 12 days. 6-O-Capro-β-cyclodextrin (1.44μg/60μL CPT) and concentrated 6-O-Capro-β-cyclodextrin (2.88μg/60μL CPT) nanoparticles significantly modified the growth or lethality of the 9L gliomas, since the median survival time was 26 days for the untreated group and between 27 and 33 days for amphiphilic cyclodextrin nanoparticle groups. These results indicate that, CPT-loaded amphiphilic cyclodextrin nanoparticles may provide a promising carrier system for the effective delivery of CPT in comparison to polymeric analogues.

Influence of irradiation sterilization on poly(lactide-co-glycolide) microspheres containing anti-inflammatory drugs

Gamma-irradiation is finding increasing use in the sterilization of pharmaceutical products. However, irradiation might also affect the performance of drug delivery systems. In this study, the influence of gamma-irradiation on the physicochemical properties of two commonly used non-steroidal anti-inflammatory drugs (NSAIDs) [naproxen sodium (NS) and diclofenac sodium (DS)] was investigated. The drugs were incorporated in poly(lactide-co-glycolide) (PLGA, 50:50; molecular weight 34000 or 88000 Da) microspheres. The biodegradable microspheres were irradiated at doses of 5, 15, 25 kGy using a 60Co source. Drug loading of irradiated and non-irradiated microspheres with both 34000 and 88000 Da polymers were essentially the same. A significant difference was noticed in the particle sizes of the irradiated as compared to the non-irradiated formulations. Notably, in release studies, the amount of active substance released from PLGA microspheres showed an increase with increasing irradiation dose. In DSC, the glass transition temperatures (Tg) of microspheres exhibited a slow increase with irradiation dose.

Antibacterial activity of triclosan chitosan coated graft on hernia graft infection model

The use of mesh in hernia repair has become common, because of lower recurrence rate and simple application. Data from the meta-analysis and the multi-central studies support the use of meshes in hernia repair. One of the complications due to the hernia repair with mesh is the infection. The incidence range is between 1 and 10%. Triclosan embedded commercial absorbable suture materials are used to reduce surgical site infection rate. This study was planned on mesh infection model, because of the low incidence rate. The agent isolated from mesh infections was mostly Staphylococcus aureus and thus it was used as the infecting agent in this research. To achieve a better therapeutic efficacy, triclosan was formulated in chitosan gels. Chitosan is an attractive biopolymer because of its biocompatible, biodegradable, bioadhesive properties. Gel formulations using chitosans (low, medium and high molecular weight) were prepared in 1% (v/v) acetic acid solution and in vitro release profiles were evaluated. Gel formulations showed release profile extended up to 7 days and high molecular weight chitosan gel formulation was released higher quantity drug than other formulations. Meshes coated with triclosan loaded chitosan gel were used to reduce bacterial count and to prevent mesh infection in the study. 24h and simultaneous bacteria inoculation was used to model mesh infection. The rats were observed for 8 days by means of surgical site infection. On the eighth day, the animals were sacrificed and the grafts were removed. Tissue squeezers were used to liberate bacterias from removed grafts. The isolated suspensions were cultured on blood agar plates and colony-forming units were counted overnight. Grafts coated with triclosan loaded chitosan gel presented satisfactory preventive effect against graft infection.