Seog Y. Jeong

Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles

Roadway-powered electric vehicles (RPEVs) are attractive candidates for future transportation because they do not rely on large and heavy batteries but directly and efficiently get power while moving along a road. The inductive power transfer systems (IPTSs) that have been widely used for the wireless powering of RPEVs are reviewed in this paper. The development history of the IPTS is tracked from the origin of the RPEV in the 1890s to the recent RPEV. Throughout its 100-year history, the size, weight, efficiency, air gap, lateral tolerance, electromagnetic force, and cost of the IPTS have been substantially improved, and now RPEVs are becoming more widely commercialized. Important milestones of the developments of the IPTS and RPEVs are summarized in this paper, focusing on recent developments of on-line electric vehicles that were first commercialized in 2013.

Ultraslim S-Type Power Supply Rails for Roadway-Powered Electric Vehicles

An ultraslim S-type power supply rail, which has a width of only 4 cm, for roadway-powered electric vehicles (RPEVs) is proposed in this paper. The cross section of the core has a thin S-shape, and a vertically-wound multiturn coil is displaced inside the core. In this way, the most slim power supply rail is designed, which is crucial for the commercialization of RPEVs. The construction of roadway infrastructure, which is responsible for more than 80% of the total deployment cost for RPEVs, can be much easier when the width of the power supply rail is so small. To increase portability and to minimize construction time, a foldable power supply module is also proposed in which flexible power cables connect each foldable power supply module such that no connectors are needed during deployment. An effective winding method for minimizing the cable length is proposed, and an optimum core thickness of the proposed power supply rail is determined by FEA simulations and verified by a prototype power supply module. By virtue of the ultraslim shape, a large lateral displacement of 30 cm at an air gap of 20 cm was experimentally obtained, which is 6 cm larger than that of the I-type power supply rail. In addition to the larger lateral displacement, it is estimated that the S-type one has lower EMF than the I-type one because the width of the S-type one is narrower than that of I-type one. The maximum efficiency, excluding the inverter, was 91%, and the pick-up power was 22 kW.

Uniform Power I-Type Inductive Power Transfer System With DQ -Power Supply Rails for On-Line Electric Vehicles

A narrow-width power-invariant inductive power transfer system (IPTS) along the driving direction is newly proposed in this paper. The conventional I-type power supply rail for on-line electric vehicles (OLEVs) has a very narrow power supply rail with 10-cm width and exposes pedestrians to a very low electromagnetic field due to its alternatively arranged magnetic poles along the driving direction of electric vehicles; however, it has a major drawback: Sinusoidal variation of the induced pick-up voltage depending on pick-up positions on the power supply rail along driving direction. To overcome this disadvantage, a dq-power supply rail fed by two high-frequency ac currents of the d-phase and q-phase is introduced in this paper. The d -phase and q-phase magnetic poles are alternatively arranged in a line; hence, the induced voltage of a pickup becomes spatially uniform. The power invariant characteristic of the proposed IPTS for OLEV has been verified by analysis, simulations, and experiments. A practical winding method is suggested as well.

Generalized Models on Self-Decoupled Dual Pick-up Coils for Large Lateral Tolerance

Self-decoupled dual pick-up coils for large lateral tolerance and low electromagnetic field for pedestrians are proposed. Analytical models are developed that are applicable to any self-decoupled coils, regardless the coil types such as single/dual pick-ups and core/coreless coils. An optimum decoupling distance between adjacent pick-up coils is determined and found to be independent of the existence of a core plate. Maximum load power over a large lateral tolerance is obtained for the optimum decoupling distance. The proposed models are so general that they can be applied to any self-decoupled pick-up coils for stationary charging and dynamic charging systems. Moreover, the self-decoupled coils are compatible with any compensation method such as serial, parallel, and serial-parallel. A prototype system of 1.5 kW and Q = 60 for roadway powered electrical vehicles was implemented and showed fairly good agreements with the theoretical models and simulations. The measured lateral tolerance was 90 cm, which is about 1.5 times of the coil width.

Tethered aerial robots using contactless power systems for extended mission time and range

Tethered aerial robots (TAR) that can be continuously powered by power cables for extended mission time and range are newly proposed. The TAR can overcome the limited mission time of conventional battery-based aerial vehicles and the mission range is quite extended with a virtue of a long aerial multi-wounded power cable. The TAR is equipped with an aerial contactless power system (ACPS) for avoiding the use of brush and an aerial tension control system (ATCS), first proposed in this paper, for avoiding tangled power cable. A prototype TAR including the ACPS and ATCS was developed and successfully demonstrated at outdoor environment, where the output power of 180 W at 100 kHz and a flight altitude of 20 m for 30 minutes were achieved.

Trends of Wireless Power Transfer Systems for Roadway Powered Electric Vehicles

Roadway powered electric vehicles (RPEV) are attractive candidates for future transportations because they are free from large and heavy batteries but directly get power efficiently while moving along a road. The inductive power transfer systems (IPTS) that have been widely used for the wireless powering of RPEV are reviewed in this paper. Main milestones of the developments of the IPTS and RPEV are summarized in this paper, mainly about the recent developments of on-line electric vehicles (OLEV) that have been commercialized first in 2013.

Self-decoupled dual pick-up coils with large lateral tolerance for roadway powered electric vehicles

Self-decoupled dual pick-up coils for roadway powered electric vehicle (RPEV) with large lateral tolerance and low EMF for pedestrians are proposed. The accurate equivalent circuits and mathematical models for the dual pick-up coils are completely developed to decouple the two adjacent pick-up coils for the both cases with and without core plates. The proposed models are verified by simulations and experiments. It is found that the adjacent pick-up coils can be decoupled regardless of the existence of core plates by overlapping the pick-up coils and the overlapping is nearly same for the both cases with and without core plates.

Metal object detection circuit with non-overlapped coils for wireless EV chargers

In the inductive power transfer (IPT) system operation, overheating of metal objects caused by eddy current may cause ignition, resulting in fire or damages to the equipment. Therefore, a metal object detection (MOD) circuit with non-overlapped coils to ensure safe operation of a wireless EV chargers is proposed in this paper. The proposed MOD circuit is composed of a variable resistor, a low pass filter, and a precision rectifier with amplification for accurate data acquisition. Influence of metal object under alternating magnetic field is described with respect to various thickness and types of metal objects. The proposed MOD circuit was experimentally verified using three non-overlapped coils and a 4cm × 4cm metal object, where its output voltage was changed from 200 mV to 1V. The MOD circuit can detect multiple metal objects at the same time and is suitable for high power wireless EV chargers.

Living object detection system based on comb pattern capacitive sensor for wireless EV chargers

A living object detection (LOD) system based on a comb pattern capacitive sensor with simple and cost-effective characteristics is applied to wireless EV chargers for the first time in this paper. The proposed LOD system mounted on a transmitter (Tx) pad adopts an optimal comb shape as a sensing pattern to obtain uniform capacitance capability. Unlike general applications using a capacitive sensor, the proposed capacitive sensor, which is applied to wireless EV chargers, inherently contains significant capacitive coupling between the living object and the ground. This capacitive coupling should be carefully considered in order to accurately sense any minimal capacitance change caused by the presence of a living object. In this paper, a static circuit model of the proposed capacitive sensor with a living object considering the ground effect and an RC integrator to detect even a tiny voltage difference are established and verified by experiments. The results show that when a living object is present, the measured capacitance by the proposed sensing pattern was increased by up to 27.5% compared to when there is no living object.

A widely uniform and highly ambient robust DC magnetic field generator for precise motion sensors

A widely uniform and highly ambient robust DC magnetic field generator for precise motion sensors using inertial measurement units (IMUs) is newly proposed in this paper. Chronic problems such as low uniformity of magnetic field and geomagnetic disturbance of conventional Helmholtz, Merritt, Rubens, Lee-Whiting, and Tetra coils can be significantly mitigated by the proposed uniform DC magnetic field generator (UFG). Different from the previous air coils, the proposed UFG adopts a core-cage so that a strong and uniform DC magnetic field distribution can be generated inside the cage and that the UFG may be quite magnetically robust to ambient changes such as geomagnetic field and ferromagnetic objects. Design procedures for the UFG are fully established. Detailed designs of the UFG for magnetic field generation, enhancing uniformity, and geomagnetic cancellation are provided. Experiments for a prototype UFG of 30 cm × 30 cm × 30 cm size showed that the geomagnetic field inside the UFG was significantly attenuated by - 21 dB while the DC magnetic field uniformity (<; 10°) was achieved over 81 % of the total volume of 27,000 cm3.