Seok-Ho Shin

Opportunities in low-level radiocarbon microtracing: applications and new technology

14C-radiolabeled (radiocarbon) drug studies are central to defining the disposition of therapeutics in clinical development. Concerns over radiation, however, have dissuaded investigators from conducting these studies as often as their utility may merit. Accelerator mass spectrometry (AMS), originally designed for carbon dating and geochronology, has changed the outlook for in-human radiolabeled testing. The high sensitivity of AMS affords human clinical testing with vastly reduced radiative (microtracing) and chemical exposures (microdosing). Early iterations of AMS were unsuitable for routine biomedical use due to the instruments’ large size and associated per sample costs. The situation is changing with advances in the core and peripheral instrumentation. We review the important milestones in applied AMS research and recent advances in the core technology platform. We also look ahead to an entirely new class of 14C detection systems that use lasers to measure carbon dioxide in small gas cells.

Prediction of pharmacokinetics and drug-drug interaction potential using physiologically based pharmacokinetic (PBPK) modeling approach: A case study of caffeine and ciprofloxacin

Over the last decade, physiologically based pharmacokinetics (PBPK) application has been extended significantly not only to predicting preclinical/human PK but also to evaluating the drug-drug interaction (DDI) liability at the drug discovery or development stage. Herein, we describe a case study to illustrate the use of PBPK approach in predicting human PK as well as DDI using in silico, in vivo and in vitro derived parameters. This case was composed of five steps such as: simulation, verification, understanding of parameter sensitivity, optimization of the parameter and final evaluation. Caffeine and ciprofloxacin were used as tool compounds to demonstrate the “fit for purpose” application of PBPK modeling and simulation for this study. Compared to caffeine, the PBPK modeling for ciprofloxacin was challenging due to several factors including solubility, permeability, clearance and tissue distribution etc. Therefore, intensive parameter sensitivity analysis (PSA) was conducted to optimize the PBPK model for ciprofloxacin. Overall, the increase in Cmax of caffeine by ciprofloxacin was not significant. However, the increase in AUC was observed and was proportional to the administered dose of ciprofloxacin. The predicted DDI and PK results were comparable to observed clinical data published in the literatures. This approach would be helpful in identifying potential key factors that could lead to significant impact on PBPK modeling and simulation for challenging compounds.

Drug–drug interaction of microdose and regular-dose omeprazole with a CYP2C19 inhibitor and inducer

Purpose A microdose drug–drug interaction (DDI) study may be a valuable tool for anticipating drug interaction at therapeutic doses. This study aimed to compare the magnitude of DDIs at microdoses and regular doses to explore the applicability of a microdose DDI study. Patients and methods Six healthy male volunteer subjects were enrolled into each DDI study of omeprazole (victim) and known perpetrators: fluconazole (inhibitor) and rifampin (inducer). For both studies, the microdose (100 μg, cold compound) and the regular dose (20 mg) of omeprazole were given at days 0 and 1, respectively. On days 2–9, the inhibitor or inducer was given daily, and the microdose and regular dose of omeprazole were repeated at days 8 and 9, respectively. Full omeprazole pharmacokinetic samplings were performed at days 0, 1, 8, and 9 of both studies for noncompartmental analysis. Results The magnitude of the DDI, the geometric mean ratios (with perpetrator/omeprazole only) of maximum concentration (Cmax) and area under the curve to the last measurement (AUCt) of the microdose and the regular dose were compared. The geometric mean ratios in the inhibition study were: 2.17 (micro) and 2.68 (regular) for Cmax, and 4.07 (micro), 4.33 (regular) for AUCt. For the induction study, they were 0.26 (micro) and 0.21 (regular) for Cmax, and 0.16 (micro) and 0.15 (regular) for AUCt. There were no significant statistical differences in the magnitudes of DDIs between microdose and regular-dose conditions, regardless of induction or inhibition. Conclusion Our results may be used as partial evidence that microdose DDI studies may replace regular-dose studies, or at least be used for DDI-screening purposes.

A Highly Sensitive Liquid Chromatography–Electrospray Ionization–Time of Flight/Mass Spectrometric Assay for the Quantitation of 4-Beta-Hydroxycholesterol and Its Application to in vivo Cytochrome P450 3a Induction by AGM-130

A liquid chromatography–electrospray ionization-time-of-flight/mass spectrometry (LC–ESI-TOF/MS) method was developed for the determination of 4-beta-hydroxycholesterol (4β-HC) in rat plasma, to evaluate cytochrome P450 3A (CYP3A) induction liability of a novel cyclin dependent kinases (CDKs) inhibitor, AGM-130. The method consisted of sample preparation without derivatization reagents for high sensitivity such as picolinyl ester, which could be labor-intensive and time consuming. The 4% bovine serum albumin in phosphate-buffered saline as a surrogate matrix was used in the calibration curve and quality control samples for the determination of 4β-HC. Stable isotope-labeled (SIL) 4β-HC (d7-4β-HC) was used as an internal standard. A quadratic regression (weighted 1/concentration), with an equation y = ax2 + bx + c, was used to fit calibration curves over the concentration range of 3.01–2220 ng/mL for 4β-HC. For quality control samples at 15.0, 165, and 1820 ng/mL from the qualification experiment, the within-run accuracy ranged from 95% to 105% with precision values ≤10% for 4β-HC. This novel LC–ESI-TOF/MS method was successfully applied to evaluate the potential of CYP3A induction by 5′-hydroxy-5-nitro-indirubin oxime (AGM-130) in rat.

A Liquid Chromatography-Quadrupole-Time-of-Flight Mass Spectrometric Assay for the Quantification of Fabry Disease Biomarker Globotriaosylceramide (GB3) in Fabry Model Mouse

Fabry disease is a rare lysosomal storage disorder resulting from the lack of α-Gal A gene activity. Globotriaosylceramide (GB3, ceramide trihexoside) is a novel endogenous biomarker which predicts the incidence of Fabry disease. At the early stage efficacy/biomarker study, a rapid method to determine this biomarker in plasma and in all relevant tissues related to this disease simultaneously is required. However, the limited sample volume, as well as the various levels of GB3 in different matrices makes the GB3 quantitation very challenging. Hereby we developed a rapid method to identify GB3 in mouse plasma and various tissues. Preliminary stability tests were also performed in three different conditions: short-term, freeze-thaw, long-term. The calibration curve was well fitted over the concentration range of 0.042–10 μg/mL for GB3 in plasma and 0.082–20 μg/g for GB3 in various tissues. This method was successfully applied for the comparison of GB3 levels in Fabry model mice (B6;129-Glatm1Kul/J), which has not been performed previously to the best of our knowledge.

Qualification and Application of a Liquid Chromatography-Quadrupole Time-of-Flight Mass Spectrometric Method for the Determination of Adalimumab in Rat Plasma

A liquid chromatography–quadrupole time-of-flight (Q-TOF) mass spectrometric method was developed for early-stage research on adalimumab in rats. The method consisted of immunoprecipitation followed by tryptic digestion for sample preparation and LC-QTOF-MS/MS analysis of specific signature peptides of adalimumab in the positive ion mode using electrospray ionization. This specific signature peptide is derived from the complementarity-determining region (CDR) of adalimumab. A quadratic regression (weighted 1/concentration), with an equation y = ax2 + bx + c, was used to fit calibration curves over the concentration range of 1–100 μg/mL for adalimumab. The qualification run met the acceptance criteria of ±25% accuracy and precision values for quality control (QC) samples. This qualified LC-QTOF-MS/MS method was successfully applied to a pharmacokinetic study of adalimumab in rats as a case study. This LC-QTOF-MS/MS approach would be useful as a complementary method for adalimumab or its biosimilars at an early stage of research.

A single liquid chromatography-quadrupole time-of-flight mass spectrometric method for the quantification of total antibody, antibody-conjugated drug and free payload of antibody-drug conjugates

A single hybrid affinity-captured-LC-TOF-MS/MS method was developed and applied for the quantification of total antibody, antibody conjugated drug and free payload of antibody drug conjugate (ADC). Adcetris®, a valine-citrulline monomethyl auristatin E conjugated ADC, was used as a model ADC compound. A quadratic regression (weighted 1/concentration) was used to fit calibration curves over the concentration range 30.65-613.00 ng/mL with an equation y = ax2  + bx + c for the antibody-conjugated drug of Adcetris®. The qualification run met the acceptance criteria of ±25% accuracy and precision values for quality control samples. For the analysis of total antibody, a signature peptide (TTPPVLDSDGSFFLYSK, molecular weight 1874) was used after affinity capture using magnetic beads and on-bead trypsin digestion. A quadratic regression (weighted 1/concentration) was used to fit calibration curves over the concentration range 5.00-100.00 μg/mL with an equation y = ax2  + bx + c for total antibody. For free payload analysis of monomethyl auristatin E, a protein precipitation method followed by LC-TOF-MS/MS analysis was used. A quadratic regression (weighted 1/concentration) was used to fit calibration curves over the concentration range 1.01-2200 ng/mL with an equation y = ax2  + bx + c for free payload. Pharmacokinetic study samples and in vitro stability samples in rat were successfully analyzed by this a hybrid affinity-captured-LC-TOF-MS/MS method. This single platform method is a useful complementary method for the pharmacokinetics study of ADC with valine-citrulline linker at the early drug discovery stage.