Seokhan Yoon

Dyeing of cotton and polyester/cotton blend with disperse dyes using sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate (DBDCBS) at alkaline condition of room temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound,DBDCBS, has two reactive groups such as dichloro-s-triazinyl group andα, β-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

Dyeing and Printing on Aramid Materials

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

Application Properties of Ultra Light Weight Silica Aerogel to Polyurethane Membrane

Application properties of ultra light weight silica aerogel toward polyurethane membranes were investigated. From the results of pre-milling process of the silica aerogel, the solvent for dispersion of the aerogel was determined for methyl ethyl ketone and its content in the solvent was determined by 30%. Using this aerogel dispersion, the polyurethane membranes were prepared according to the mixing amount of silica aerogel and various properties of the membranes were investigated. As results, the optimum mixing amount of silica aerogel inside polyurethane membranes was decided at 11%, because the improvement of light weight property, air permeability, and moisture vapor permeability were improved upto 11% of silica aerogel content, maintaining the water penetration resistance almost unchanged.

Research of Possibility of Carrageenan as DTP Pre-treatment Thickening Agent for Cellulosic Fabric

A pre-treatment process is essential for getting high quality of digital textile printing(DTP). In this study, we have studied three kinds of carrageenan polymer(k-, -, i-Carrageenan) as a pre-treatment thickening agent for the first time. Alginate polymer was also examined and its results were compared with that of the three kinds of carrageenan polymer. To confirm the performance of each thickening agent, we examined for a sharpness, color strength and fastness(washing, rub, light). The result showed that -Carrageenan has superior property in sharpness with low viscosity and i-Carrageenan was excellent in the color strength among the pre-treatment agents. Washing fastness to color change and staining for the all samples were 4 or 4-5 grade. Both dry and wet rubbing fastness of the samples were 4-5 grade. However, -Carrageenan coated sample has the lowest grade in light fastness. As a result, we found the possibility of carrageenan polymer as pre-treatment agent.

Change of Dyeability and Physical Properties of Modified Wool by Formic Acid, Ultrasonic Wave and Heat Treatment

In this study, the possibility of the practical development of highly sensitive clothing textiles using fibrillated wool fibers were considered by determining the dyeability, the physical and mechanical properties of fibrillated wool fibers treated under strong acid and high temperature ultrasonic wave irradation and they were compared with those of untreated wool fibers. The color strengths of the dyed fibrillated wool fabrics increased by the acid metal complex dyes contrary to the untreated wool fabrics, and color fastness properties to rubbing, light, and dry cleaning were excellent, similar to those of the untreated wool fabrics. The tensile strengths of fibrillated wool fabrics were also kept after the dyeing. Moreover, the Numeri, Fukurami, and THV of the fibrillated wool fabrics were better than those of the untreated wool fabrics.

Dyeing Properties of Askin Fabric with Indigo

Recently, polyester is widely used in textile fabrics due to its application potentials in various fields. It is known that askin fabric is prepared with mainly polyester and is enjoyed with various end uses such as marine clothing, underwear, shirts, swimming suits and so on. For this purpose, color fastness should be considered with great importance during its wet processing step. In this context, vat dyes were very much attracted due to the advantage of superior fastness property. Thus, we have used indigo dye towards askin fabric dyeings and investigated corresponding properties namely, dyeing temperature, concentration of dye, reducing agent amount and alkali amount. The results showed that higher color strengths of indigo dyeing on askin fabric were obtained at , 8% o.w.f, 3g/l, 5g/l, respectively. The color fastness to washing was considerable generally.

Synthesis of Blue Acid Dyes having Antimicrobial Property and its Application on Nylon Fiber

Sulfadiazine and silver sulfadiazine are well-known bactericidal agent routinely used clinical settings. Antimicrobial acid dyes were synthesized by introducing sulfadiazine or silver sulfadiazine and applied on nylon fabric. The Chemical Structure of the Synthesized dyes was identified by HPLC-mass. The dyeability of synthesized acid dyes for nylon fabric was similar to commercial acid dyes. Resistance to washing, rubbing and lightfastness were good. Nylon fabrics dyed with synthesized acid dyes had good antimicrobial properties. Durable antimicrobial properties after 20 times washing have shown good result that reduction ratio of colonies, is 99.9 %. Mixed dyeing were carried out using commercial acid dyes(leveling type) and synthesized dyes. The mixed dyeings have also shown good antimicrobial properties.