Serdar Usumez

Effect of Self-Etching Primers on Bond Strength—Are They Reliable?

Currently introduced self-etching primers combine conditioning and priming agents into a single product. The purpose of this study was to determine the effects of using three self-etching primers on the shear bond strength (SBS) of orthodontic brackets and on the bracket/adhesive failure mode. Brackets were bonded to extracted human teeth according to one of four protocols. In the control group, teeth were etched with 37% phosphoric acid. In the experimental groups, the enamel was conditioned with three different self-etching primers, Clearfil SE Bond (CSE), Etch & Prime 3.0 (EP3), or Transbond Plus (TBP), as suggested by the manufacturer. The brackets were then bonded with Transbond XT in all groups. The present in vitro findings indicate that conditioning with TBP before bonding orthodontic brackets to the enamel surface resulted in a significantly (P < or = .001) higher SBS (mean, 16.0 +/- 4.5 MPa) than that found in CSE, EP3, and the control (acid-etched [AE]) groups. CSE produced bond strength values (mean 11.5 +/- 3.3 MPa) that are statistically comparable to those produced by acid etching (mean 13.1 +/- 3.1 MPa). The use of EP3 for enamel conditioning resulted in the lowest mean SBS value (mean 9.9 +/- 4.0 MPa). A comparison of the adhesive remnant index scores indicated that there was more residual adhesive remaining on the teeth that were treated with conventional acid etching than in the CSE and EP3 groups. In the TBP group, the failure sites were similar to those of the AE group but different from those of the CSE group.

Can previously bleached teeth be bonded safely

The purpose of our study was to determine the effect of a 35% hydrogen peroxide bleaching agent on the shear bond strength of metallic orthodontic brackets. Sixty premolars were randomly divided into 3 groups of 20 each. Teeth in group A were etched with 37% phosphoric acid before bonding metallic premolar brackets. Teeth in the other 2 groups were bleached with a 35% hydrogen peroxide in-office bleaching agent according to the manufacturers recommendations. Twenty bleached teeth (group B) were bonded immediately, and the other 20 (group C) were stored in artificial saliva for 30 days before bonding. Shear bond strength of these brackets was measured on a universal testing machine and recorded in MPa. Adhesive remnant index (ARI) scores were determined after the brackets failed. Data were analyzed with analysis of variance (ANOVA) and chi-square tests. The shear bond strength values of groups A, B, and C were 12.9 +/- 3.4, 12.0 +/- 4.6, and 14.8 +/- 4.0 MPa, respectively. Results of ANOVA showed no statistically significant differences in shear bond strengths between groups (P >.05). ARI scores were significantly different in all groups. The unbleached groups failures were primarily at the bracket/adhesive interface, whereas the bleached groups either showed cohesive failures within the adhesive or failed at the adhesive/enamel interface. The results of this study suggest that office bleaching with hydrogen peroxide does not adversely affect the bond strengths of brackets bonded immediately after bleaching or 30 days after bleaching, even though bleaching can result in differences in the failure site.

New Generation Open-bite Treatment with Zygomatic Anchorage

This technical note aims to present the fabrication and application of a new generation of posterior intrusion appliances using zygomatic anchorage. The use of zygomatic anchorage enables en masse impaction of the posterior segment without any side effects such as labial flaring. A 14-year-old, female Class II patient with an anterior open bite was treated with a new generation posterior intrusion appliance. At the end of treatment, a Class I canine and molar relationship and a correction of the anterior open bite were achieved. The molars were impacted 3.6 mm, and this impaction was maintained throughout the treatment. The mandibular plane showed a counterclockwise autorotation of 4 degrees. This case report demonstrates that zygomatic anchorage can be used effectively for molar intrusion and anchorage maintenance. However, further clinical studies with larger samples are required to confirm its effectiveness.

Dental and alveolar arch widths in normal occlusion, class II division 1 and class II division 2.

The aim of this study was to compare the transverse dimensions of the dental arches and alveolar arches in the canine, premolar, and molar regions of Class II division 1 and Class II division 2 malocclusion groups with normal occlusion subjects. This study was performed using measurements on dental casts of 150 normal occlusion (mean age: 21.6 +/- 2.6 years), 106 Class II division 1 (mean age: 17.2 +/- 2.4 years), and 108 Class II division 2 (mean age: 18.5 +/- 2.9 years) malocclusion subjects. Independent-samples t-test was applied for comparisons of the groups. These findings indicate that the maxillary interpremolar width, maxillary canine, premolar and molar alveolar widths, and mandibular premolar and molar alveolar widths were significantly narrower in subjects with Class II division 1 malocclusion than in the normal occlusion sample. The maxillary interpremolar width, canine and premolar alveolar widths, and all mandibular alveolar widths were significantly narrower in the Class II division 2 group than in the normal occlusion sample. The mandibular intercanine and interpremolar widths were narrower and the maxillary intermolar width measurement was larger in the Class II division 2 subjects when compared with the Class II division 1 subjects. Maxillary molar teeth in subjects with Class II division 1 malocclusions tend to incline to the buccal to compensate the insufficient alveolar base. For that reason, rapid maxillary expansion rather than slow expansion may be considered before or during the treatment of Class II division 1 patients.

Rapid maxillary expansion. Is it better in the mixed or in the permanent dentition

The aim of this study was to compare the dentoskeletal effects of a modified acrylic-bonded rapid maxillary expansion (RME) device when it is used in the mixed and permanent dentitions. The study group consisted of 51 patients in the mixed and permanent dentition (26 girls and 25 boys) who underwent RME treatment. Group 1 was composed of 34 subjects in the mixed dentition (19 girls and 15 boys; mean age, 9.2 +/- 1.3 years). Group 2 consisted of 17 subjects in the permanent dentition (seven girls and 10 boys; mean age 12.7 +/- 1.2 years). Lateral and frontal cephalograms and upper dental casts were collected before treatment (T1), after treatment (T2), and after retention (T3). Intragroup and intergroup changes were evaluated by paired t-test and Students t-test, respectively. In both groups after RME, the maxilla moved forward; mandible rotated posteriorly; facial height increased; nasal, maxillary, and maxillary intercanine and first molar widths increased; and the upper molars tipped buccally. Almost all these significant changes were stable at follow-up (T3). When overall (T1 - T3) differences were considered, upper molars tipped more, and the ANB angle increased less in the mixed dentition group compared with the permanent dentition group (P < .01). Within the limits of this study, the results suggest that the orthopedic effects of RME are not as great as expected at early ages, and it might be a better alternative to delay RME to early permanent dentition.

Effects of Extraction and Nonextraction Treatment on Class I and Class II Subjects

This study aims to examine the profile as well as the dentoalveolar and skeletal effects of extraction or nonextraction treatment in a wide range of patients including Class I and Class II, division 1 cases. Results achieved with extraction and nonextraction modalities have also been compared. The study was performed on pretreatment and posttreatment lateral cephalograms of 87 orthodontic patients. There were no significant differences between the pretreatment values of extraction and nonextraction Class I groups, whereas SN-GoGn (degrees), maxillary incisor to A-Po (degrees), mandibular incisor to A-Po (mm), Co-Gn (mm), overjet (mm), and overbite (mm) measurements of extraction Class II group were significantly higher before the treatment. After treatment, these differences were eliminated in the Class II group; however, incisors were significantly protruded in both nonextraction groups. No other differences in profile or lip position were found between the extraction and nonextraction groups. The results of this study indicate that in successfully treated cases, whether by extraction or nonextraction, the same soft and hard tissue profile posttreatment end points were reached except for the incisor positioning, which is rather easier to anticipate than profile and soft tissue changes. The simple statement that extraction means a more retrusive or dished-in profile seems to be unacceptable. It seems that a more thorough assessment and investigation including pretreatment extent of crowding and factors related to anchorage, soft tissue thickness, and strain should be carried out.

Effect of light-emitting diode on bond strength of orthodontic brackets.

The aim of this study was to evaluate the effect of light-emitting diode (LED) light curing on shear bond strength (SBS) of orthodontic brackets bonded to teeth. Light exposure of 40 seconds from a conventional halogen-based light-curing unit was used as a control. Eighty human premolars were divided into four groups of 20 each. Brackets were bonded to acid-etched teeth with Transbond XT light-cured adhesive. In the first group, the adhesive was light cured for 40 seconds with a conventional halogen unit (XL3000, 3M). In the other three groups, adhesive was cured with a commercial LED unit (Elipar FreeLight, 3M ESPE) for 10, 20, or 40 seconds. SBS of brackets was measured on a universal testing machine and recorded in megapascals. Adhesive remnant index (ARI) scores were determined after failure of brackets. Data were analyzed using analysis of variance and chi-square tests. No statistically significant differences were found among the SBS values of halogen-based light-cured (13.1 +/- 3.1 MPa) and 20- and 40-second LED-cured (13.9 +/- 4.8 MPa and 12.7 +/- 5.1 MPa) specimens (P > .05). However, 10 seconds of LED curing yielded significantly lower SBS (P < .05). No statistically significant differences were found between the ARI scores among groups. The results of this study are promising for the orthodontic application of LED-curing units, but further compatibility and physical characteristic studies of various orthodontic adhesives and clinical trials should be performed before validation.

The Effects of Early Preorthodontic Trainer Treatment on Class II, Division 1 Patients

The aim of this study was to clarify the dentoskeletal treatment effects induced by a preorthodontic trainer appliance treatment on Class II, division 1 cases. Twenty patients (10 girls and 10 boys, mean age 9.6 +/- 1.3 years) with a Class II, division 1 malocclusion were treated with preorthodontic trainer appliances (Myofunctional Research Co., Queensland, Australia). The patients were instructed to use the trainer every day for one hour and overnight while they slept. A control group of 20 patients (mean age 10.2 +/- 0.8 years) with untreated Class II, division 1 malocclusions was used to eliminate possible growth effects. Lateral cephalograms were taken at the start and end of treatment. Final cephalograms were taken 13.1 +/- 1.8 months after trainer application, compared with a mean of 11.2 +/- 2.4 months later for the control group. The mean and standard deviations for cephalometric measurements were analyzed by paired-samples t-test and independent-samples t-tests. At the end of the study period, the trainer group subjects showed significant changes including anterior rotation and sagittal growth of the mandible, increased SNB and facial height, reduced ANB, increased lower incisor proclination, retroclination of upper incisors, and overjet reduction. However, only total facial height increase, lower incisor proclination, and overjet reduction were significantly higher when compared with the changes observed in the control group. This study demonstrates that the preorthodontic trainer application induces basically dentoalveolar changes that result in significant reduction of overjet and can be used with appropriate patient selection.

Effect of Rapid Maxillary Expansion on Nocturnal Enuresis

One of the effects of rapid maxillary expansion (RME) is a reduction in nighttime bed-wetting. The aim of this prospective study was to investigate the effects of RME on nocturnal enuresis (NE) in children who are liable to psychosocial stress conditions. Eight children (six boys and two girls) who had not responded to different conventional medical treatments were included in the study. The subjects were between eight and 11 years of age with a mean age of nine years five months, and were residents of a government orphanage. All the children wet the bed at least one time every night and previously had been subjected to unsuccessful conventional treatment modalities. Maxillary expansion was performed using a rigid acrylic RME device. Lateral and PA cephalometric films and dental casts were used in the assessment of the dentofacial and nasopharyngeal structures. Data were analyzed using a paired t-test. In seven of the eight children, remarkable improvement was observed in NE after three to six mm RME. At the end of eight months observation, the mean rate of improvement in bed-wetting in the seven successful subjects was 74.2% (57.6-87.5%). The findings also indicated significant changes in the nasomaxillary structures and nasopharyngeal airway dimensions with the use of RME. However, none of the subjects became completely dry, and the disorder is probably multicausal including psychological emotions and tensions. This study demonstrated that RME treatment could cause relief for the enuretic children. However, the long-term success rate is still questionable.

Dental and Alveolar Arch Widths in Normal Occlusion and Class III Malocclusion

The aim of this study was to compare the transverse dimensions of the dental arches and alveolar widths of Class III malocclusion group with a group of untreated normal occlusion subjects. This study was performed using measurements on dental casts of 150 normal occlusion (mean age, 21.6 +/- 2.6 years) and 100 Class III malocclusion (mean age, 15.4 +/- 2.2 years) subjects. Independent samples t-test was applied for comparing the groups. The findings of this study indicated that the mandibular intercanine and intermolar alveolar widths were significantly larger in the Class Ill group when compared with the normal occlusion sample (P < .001). Maxillary interpremolar, intermolar widths and all maxillary alveolar width measurements were significantly narrower in the Class III group (P < .001). In addition, the lower canine and premolar alveolar width measurements were also statistically significantly larger in the normal occlusion group when compared with the Class III malocclusion group (P < .001). Subjects with Class III malocclusion tend to have the maxillary teeth inclined to the lingual and mandibular teeth inclined to the buccal direction because of the restriction of maxillary growth and development according to dental arch width measurements. Therefore, rapid maxillary expansion should be considered before or during the treatment of a Class III patient with or without face-mask therapy.