Serge Maurice Mbadinga

Insights into the Anaerobic Biodegradation Pathway of n -Alkanes in Oil Reservoirs by Detection of Signature Metabolites

Anaerobic degradation of alkanes in hydrocarbon-rich environments has been documented and different degradation strategies proposed, of which the most encountered one is fumarate addition mechanism, generating alkylsuccinates as specific biomarkers. However, little is known about the mechanisms of anaerobic degradation of alkanes in oil reservoirs, due to low concentrations of signature metabolites and lack of mass spectral characteristics to allow identification. In this work, we used a multidisciplinary approach combining metabolite profiling and selective gene assays to establish the biodegradation mechanism of alkanes in oil reservoirs. A total of twelve production fluids from three different oil reservoirs were collected and treated with alkali; organic acids were extracted, derivatized with ethanol to form ethyl esters and determined using GC-MS analysis. Collectively, signature metabolite alkylsuccinates of parent compounds from C1 to C8 together with their (putative) downstream metabolites were detected from these samples. Additionally, metabolites indicative of the anaerobic degradation of mono- and poly-aromatic hydrocarbons (2-benzylsuccinate, naphthoate, 5,6,7,8-tetrahydro-naphthoate) were also observed. The detection of alkylsuccinates and genes encoding for alkylsuccinate synthase shows that anaerobic degradation of alkanes via fumarate addition occurs in oil reservoirs. This work provides strong evidence on the in situ anaerobic biodegradation mechanisms of hydrocarbons by fumarate addition.

Methanogenic Microbial Community Composition of Oily Sludge and Its Enrichment Amended with Alkanes Incubated for Over 500 Days

Methanogenic microbial community is responsive to the availability of hydrocarbons and such information is critical for the assessment of hydrocarbon degradation in remediation and also in biologically enhanced recovery of energy from non-producing oil reserves. In this study, methanogenic enrichment cultures from oily sludge amended with n-alkanes (C15-C20) showed a development of active methanogenic alkanes-degrading consortium for over a total of 1000 days of incubation at 37°C. Total genomic DNAs were extracted from three types of samples, the original oily sludge (OS), the sludge after incubation for 500 days under methanogenic condition without any external carbon addition (EC), and the enrichment culture from the EC amended with n-alkanes (ET) incubated for another 500 days. The phylogenetic diversities of microbial communities of the three samples were analyzed by PCR amplification of partial 16S rRNA genes. The catabolic genes encoding benzylsuccinate synthase (bssA) and alkylsuccinate synthase (assA) were also examined by PCR amplification. These results provide important evidence in that microbial populations in an oily sludge shifted from methanogenic aromatic compounds degrading communities to potential methanogenic alkane-degrading communities when the enrichment was supplemented with n-alkanes and incubated under anaerobic conditions.

Analysis of microbial communities in the oil reservoir subjected to CO2-flooding by using functional genes as molecular biomarkers for microbial CO2 sequestration

Sequestration of CO2 in oil reservoirs is considered to be one of the feasible options for mitigating atmospheric CO2 building up and also for the in situ potential bioconversion of stored CO2 to methane. However, the information on these functional microbial communities and the impact of CO2 storage on them is hardly available. In this paper a comprehensive molecular survey was performed on microbial communities in production water samples from oil reservoirs experienced CO2-flooding by analysis of functional genes involved in the process, including cbbM, cbbL, fthfs, [FeFe]-hydrogenase, and mcrA. As a comparison, these functional genes in the production water samples from oil reservoir only experienced water-flooding in areas of the same oil bearing bed were also analyzed. It showed that these functional genes were all of rich diversity in these samples, and the functional microbial communities and their diversity were strongly affected by a long-term exposure to injected CO2. More interestingly, microorganisms affiliated with members of the genera Methanothemobacter, Acetobacterium, and Halothiobacillus as well as hydrogen producers in CO2 injected area either increased or remained unchanged in relative abundance compared to that in water-flooded area, which implied that these microorganisms could adapt to CO2 injection and, if so, demonstrated the potential for microbial fixation and conversion of CO2 into methane in subsurface oil reservoirs.

Chemical Structure, Property and Potential Applications of Biosurfactants Produced by Bacillus subtilis in Petroleum Recovery and Spill Mitigation

Lipopeptides produced by microorganisms are one of the five major classes of biosurfactants known and they have received much attention from scientific and industrial communities due to their powerful interfacial and biological activities as well as environmentally friendly characteristics. Microbially produced lipopeptides are a series of chemical structural analogues of different families and, among them, 26 families covering about 90 lipopeptide compounds have been reported in the last two decades. This paper reviews the chemical structural characteristics and molecular behaviors of surfactin, one of the representative lipopeptides of the 26 families. In particular, two novel surfactin molecules isolated from cell-free cultures of Bacillus subtilis HSO121 are presented. Surfactins exhibit strong self-assembly ability to form sphere-like micelles and larger aggregates at very low concentrations. The amphipathic and surface properties of surfactins are related to the existence of the minor polar and major hydrophobic domains in the three 3-D conformations. In addition, the application potential of surfactin in bioremediation of oil spills and oil contaminants, and microbial enhanced oil recovery are discussed.

High Frequency of Thermodesulfovibrio spp. and Anaerolineaceae in Association with Methanoculleus spp. in a Long-Term Incubation of n-Alkanes-Degrading Methanogenic Enrichment Culture

In the present study, the microbial community and functional gene composition of a long-term active alkane-degrading methanogenic culture was established after two successive enrichment culture transfers and incubated for a total period of 1750 days. Molecular analysis was conducted after the second transfer (incubated for 750 days) for both the active alkanes-degrading methanogenic enrichment cultures (T2-AE) and the background control (T2-BC). A net increase of methane as the end product was detected in the headspace of the enrichment cultures amended with long-chain n-alkanes and intermediate metabolites, including octadecanoate, hexadecanoate, isocaprylate, butyrate, isobutyrate, propionate, acetate, and formate were measured in the liquid cultures. The composition of microbial community shifted through the successive transfers over time of incubation. Sequences of bacterial and archaeal 16S rRNA gene (16S rDNA) and mcrA functional gene indicated that bacterial sequences affiliated to Thermodesulfovibrio spp. and Anaerolineaceae and archaeal sequences falling within the genus Methanoculleus were the most frequently encountered and thus represented the dominant members performing the anaerobic degradation of long-chain n-alkanes and methanogenesis. In addition, the presence of assA functional genes encoding the alkylsuccinate synthase α subunit indicated that fumarate addition mechanism could be considered as a possible initial activation step of n-alkanes in the present study. The succession pattern of microbial communities indicates that Thermodesulfovibrio spp. could be a generalist participating in the metabolism of intermediates, while Anaerolineaceae plays a key role in the initial activation of long-chain n-alkane biodegradation.

The biofilm property and its correlationship with high-molecular-weight polyacrylamide degradation in a water injection pipeline of Daqing oilfield

Biofilms increase dragging force for liquid transportation, cause power consumption, and result in equipment corrosion in polymer-flooding oilfields. To reveal the responsible microorganisms for biofilm formation and stability of high-molecular-weight polyacrylamide (PAM), a biofilm, developed on the sieve of a piston plunger pump in a water transport and injection pipeline with partial hydrolyzed polyacrylamide (HPAM) in Daqing Oilfield, was collected and analyzed by molecular microbiology, chemical and physical methods. Diverse bacterial groups (11 families) were detected in the biofilm, including Pseudomonadaceae, Rhodocyclaceae, Desulfobulbaceae, Alcaligenaceae, Comamonadaceae, Oxalobacteraceae, Bacteriovoracaceae, Campylobacteraceae, Flavobacteriaceae, Clostridiales Incertae Sedis XIII and Moraxellaceae. Three archaeal orders of methanogens including Methanomicrobiales, Methanosarcinales and Thermoplasmatales were also detected separately. HPAM was degraded into lower molecular weight polymers and organic fragments with its amide groups hydrolyzed into carboxylic groups by the microorganisms. The microenvironment of the biofilm contained diverse bacterial and archaeal communities, correlating with the extracellular polymeric substance (EPS) and HPAM biodegradation. The results are helpful to provide information for biofilm control in oil fields.

Evaluation of microbial community composition in thermophilic methane-producing incubation of production water from a high-temperature oil reservoir

Investigation of petroleum microbes is fundamental for the development and utilization of oil reservoirs’ microbial resources, and also provides great opportunities for research and development of bio-energy. Production water from a high-temperature oil reservoir was incubated anaerobically at 55°C for more than 400 days without amendment of any nutrients. Over the time of incubation, about 1.6 mmol of methane and up to 107 μ mol of hydrogen (H2) were detected in the headspace. Methane formation indicated that methanogenesis was likely the predominant process in spite of the presence of 23.4 mM in the production water. Microbial community composition of the incubation was characterized by means of 16S rRNA gene clone libraries construction. Bacterial composition changed from Pseudomonales as the dominant population initially to Hydrogenophilales-related microorganisms affiliated to Petrobacter spp. closely. After 400 days of incubation, other bacterial members detected were related to Anareolineales, β-, γ-, and δ-Proteobacteria. The archaeal composition of the original production water was essentially composed of obligate acetoclastic methanogens of the genus Methanosaeta, but the incubation was predominantly composed of CO2-reducing methanogens of the genus Methanothermobacter and Crenarchaeotes-related microorganisms. Our results suggest that methanogenesis could be more active than expected in oil reservoir environments and methane formation from CO2-reduction played a significant role in the methanogenic community. This conclusion is consistent with the predominant role played by H2-oxidizing methanogens in the methanogenic conversion of organic matter in high-temperature petroleum reservoirs.

Diversity and Composition of Sulfate-Reducing Microbial Communities Based on Genomic DNA and RNA Transcription in Production Water of High Temperature and Corrosive Oil Reservoir

Deep subsurface petroleum reservoir ecosystems harbor a high diversity of microorganisms, and microbial influenced corrosion is a major problem for the petroleum industry. Here, we used high-throughput sequencing to explore the microbial communities based on genomic 16S rDNA and metabolically active 16S rRNA analyses of production water samples with different extents of corrosion from a high-temperature oil reservoir. Results showed that Desulfotignum and Roseovarius were the most abundant genera in both genomic and active bacterial communities of all the samples. Both genomic and active archaeal communities were mainly composed of Archaeoglobus and Methanolobus. Within both bacteria and archaea, the active and genomic communities were compositionally distinct from one another across the different oil wells (bacteria p = 0.002; archaea p = 0.01). In addition, the sulfate-reducing microorganisms (SRMs) were specifically assessed by Sanger sequencing of functional genes aprA and dsrA encoding the enzymes adenosine-5′-phosphosulfate reductase and dissimilatory sulfite reductase, respectively. Functional gene analysis indicated that potentially active Archaeoglobus, Desulfotignum, Desulfovibrio, and Thermodesulforhabdus were frequently detected, with Archaeoglobus as the most abundant and active sulfate-reducing group. Canonical correspondence analysis revealed that the SRM communities in petroleum reservoir system were closely related to pH of the production water and sulfate concentration. This study highlights the importance of distinguishing the metabolically active microorganisms from the genomic community and extends our knowledge on the active SRM communities in corrosive petroleum reservoirs.

Analysis of Bacterial and Archaeal Communities along a High-Molecular-Weight Polyacrylamide Transportation Pipeline System in an Oil Field

Viscosity loss of high-molecular-weight partially hydrolyzed polyacrylamide (HPAM) solution was observed in a water injection pipeline before being injected into subterranean oil wells. In order to investigate the possible involvement of microorganisms in HPAM viscosity loss, both bacterial and archaeal community compositions of four samples collected from different points of the transportation pipeline were analyzed using PCR-amplification of the 16S rRNA gene and clone library construction method together with the analysis of physicochemical properties of HPAM solution and environmental factors. Further, the relationship between environmental factors and HPAM properties with microorganisms were delineated by canonical correspondence analysis (CCA). Diverse bacterial and archaeal groups were detected in the four samples. The microbial community of initial solution S1 gathered from the make-up tank is similar to solution S2 gathered from the first filter, and that of solution S3 obtained between the first and the second filter is similar to that of solution S4 obtained between the second filter and the injection well. Members of the genus Acinetobacter sp. were detected with high abundance in S3 and S4 in which HPAM viscosity was considerably reduced, suggesting that they likely played a considerable role in HPAM viscosity loss. This study presents information on microbial community diversity in the HPAM transportation pipeline and the possible involvement of microorganisms in HPAM viscosity loss and biodegradation. The results will help to understand the microbial community contribution made to viscosity change and are beneficial for providing information for microbial control in oil fields.

Synthesis of Anaerobic Degradation Biomarkers Alkyl-, Aryl- and Cycloalkylsuccinic Acids and Their Mass Spectral Characteristics

Anaerobic biodegradation of petroleum hydrocarbons has been reported to proceed predominantly via fumarate addition to yield substituted succinate metabolites. These metabolites, commonly regarded as signature biomarkers, are specific indicators of anaerobic hydrocarbon degradation by microbial activity. To the best of our knowledge, mass spectrometry information for 2-(1-methylalkyl) succinic acids, 2-arylsuccinic acids, 2-cycloalkylsuccinic acids and/or their derivatives is still incomplete, especially for the analysis of environmental samples. Here, a novel approach is proposed for the successful synthesis of five hydrocarbon-derived succinic acids. The characteristic fragments of 2-(1-methylalkyl)succinic acid diesters were investigated by four derivatization processes (methyl, ethyl, n-butyl and trimethylsilyl esterification), some of which are not available in official libraries. Under electron ionization mass spectrometry conditions, informative fragments of various molecular masses have been obtained. Results confirmed characteristic differences among the derivatization processes of the chemically synthesized compounds. In the case of 2-(cyclo)alkylsuccinate esters, four intermediate fragments were observed at m/z 114 + 14n, 118 + 28n, [M – (17 + 14n)]+ and [M – (59 + 14n)]+ (n = 1, 2 and 4 for methyl, ethyl and n-butyl ester). However, for silylation the abundant fragment ions are at m/z 262, 217, 172, 147, 73 and [M − 15]+. These data provide information for the identification of hydrocarbon-derived succinic acids as anaerobic biodegradation intermediates in hydrocarbons-rich environments.