Sergey N. Kalyakin

System peaks in capillary zone electrophoresis of anions with negative voltage polarity and counter‐electroosmotic flow

The system peaks that often appear on electropherograms in anion separation by CE with indirect spectrophotometric detection, negative voltage polarity and cathodic EOF are studied. The system peaks are shown to correspond to the zones with the changed concentration of the BGE constituents; they appear while the zone of each analyte anion passes through the outlet end of the capillary and are transported to the detector by EOF. An equation is suggested for predicting migration times of the system peaks with an error of 1%. The ratios of the system peak area to the analyte peak area are found to amount to 20%. It is shown that it is possible to avoid overlapping of the system peaks and analyte peaks by controlling the EOF velocity owing to hydrodynamic pressure. Using the mathematical simulation of CE shows that the system peaks and baseline shift can result from changing the transference numbers of the BGE ions and analyte ions at the capillary edge. The cases when the system peak may be incorrectly identified as the peak of analyte ion are considered. In order to avoid such errors, some practical recommendations are given.

Hydrodynamic suppression of the electroosmotic flow in capillary electrophoresis with indirect spectrophotometric detection

A version of capillary electrophoresis with indirect spectrophotometric detection and the hydrodynamic suppression of electroosmotic flow is studied. It is shown that, to improve the reliability of ion identification, one should calculate electrophoretic mobilities of ions or migration times corrected with regard to the electroosmotic flow rate. Correlations between electrophoretic peak areas of ions and their electrophoretic mobilities are derived. In the studied version of capillary electrophoresis, the accuracy of measuring anion concentrations can be improved using the internal standard method.

System peaks and optimization of anion separation in capillary electrophoresis with non-reversed electroosmotic flow

We studied system peaks present in the electropherograms obtained in the separation of anions by capillary electrophoresis with indirect spectrophotometric detection and cathode electroosmotic flow (EOF) with a chromate background electrolyte. The system peaks correspond to the zones with changed concentration of the background electrolyte; they formed when the zones of each analyte passed through the outlet of the capillary and then moved towards the EOF detector. It has been revealed that the height and area of the system peaks linearly depends on the concentration of the corresponding anion and the areas of the system peaks can achieve 10% of the anion peak area. An algorithm has been proposed for the determination of the optimal conditions for anion separation using hydrodynamic pressure for the regulation of the EOF flow rate. This algorithm prevents the overlapping of the anion and system peaks.

Binary extraction of lanthanides (III) nitrates with carboxylates and dialkylphosphates of secondary and tertiary amines

The separation of lanthanide (III) ions with binary extractants based on carboxylates, di-(2-ethylhexyl) phosphates of secondary and tertiary amines and their mixtures has been studied. The parameters of lanthanide nitrates extraction from the aqueous phase by solutions of these substances in nonpolar diluents have been found to fit the binary extraction mechanism. For systems containing di-(2-ethylhexyl) phosphate and caprate of dioctylammonium and trioctylammonium, synergistic effects have been observed.