Sergio Grunder

Large-Pore Apertures in a Series of Metal-Organic Frameworks

Maximizing Molecular Pore Diameters Amorphous materials, such as activated carbon, can have pore diameters of several nanometers, but the synthesis of ordered structures with very large pore diameters is often thwarted by the creation of interpenetrating networks or difficulties in removing guest molecules. Deng et al. (p. 1018) avoided these problems in the synthesis of metal-organic frameworks (MOFs) with very large diameters (some exceeding 3 nanometers) by using a combination of short and very long linking groups. The compounds formed channels almost 10 nanometers in diameter that could be visualized by electron microscopy and that were large enough to accommodate protein molecules. Metal-organic frameworks with hexagonal channel pores up to almost 100 angstroms in diameter have been synthesized. We report a strategy to expand the pore aperture of metal-organic frameworks (MOFs) into a previously unattained size regime (>32 angstroms). Specifically, the systematic expansion of a well-known MOF structure, MOF-74, from its original link of one phenylene ring (I) to two, three, four, five, six, seven, nine, and eleven (II to XI, respectively), afforded an isoreticular series of MOF-74 structures (termed IRMOF-74-I to XI) with pore apertures ranging from 14 to 98 angstroms. All members of this series have noninterpenetrating structures and exhibit robust architectures, as evidenced by their permanent porosity and high thermal stability (up to 300°C). The pore apertures of an oligoethylene glycol–functionalized IRMOF-74-VII and IRMOF-74-IX are large enough for natural proteins to enter the pores.

Molecular junctions based on aromatic coupling

If individual molecules are to be used as building blocks for electronic devices, it will be essential to understand charge transport at the level of single molecules. Most existing experiments rely on the synthesis of functional rod-like molecules with chemical linker groups at both ends to provide strong, covalent anchoring to the source and drain contacts. This approach has proved very successful, providing quantitative measures of single-molecule conductance, and demonstrating rectification and switching at the single-molecule level. However, the influence of intermolecular interactions on the formation and operation of molecular junctions has been overlooked. Here we report the use of oligo-phenylene ethynylene molecules as a model system, and establish that molecular junctions can still form when one of the chemical linker groups is displaced or even fully removed. Our results demonstrate that aromatic pi-pi coupling between adjacent molecules is efficient enough to allow for the controlled formation of molecular bridges between nearby electrodes.

Electrical conductance of conjugated oligomers at the single molecule level.

We determine and compare, at the single molecule level and under identical environmental conditions, the electrical conductance of four conjugated phenylene oligomers comprising terminal sulfur anchor groups with simple structural and conjugation variations. The comparison shows that the conductance of oligo(phenylene vinylene) (OPV) is slightly higher than that of oligo(phenylene ethynylene) (OPE). We find that solubilizing side groups do neither prevent the molecules from being anchored within a break junction nor noticeably influence the conductance value.

Photophysical pore control in an azobenzene-containing metal–organic framework

The synthesis and structure of an azobenzene functionalized isoreticular metal–organic framework (azo-IRMOF-74-III) [Mg2(C26H16O6N2)] are described and the ability to controllably release a guest from its pores in response to an external stimulus has been demonstrated. Azo-IRMOF-74-III is an isoreticular expansion of MOF-74 with an etb topology and a 1-D hexagonal pore structure. The structure of azo-IRMOF-74-III is analogous to that of MOF-74, as demonstrated by powder X-ray diffraction, with a surface area of 2410 m2 g−1 BET. Each organic unit within azo-IRMOF-74-III is decorated with a photoswitchable azobenzene unit, which can be toggled between its cis and trans conformation by excitation at 408 nm. When propidium iodide dye was loaded into the MOF, spectroscopic studies showed that no release of the luminescent dye was observed under ambient conditions. Upon irradiation of the MOF at 408 nm, however, the rapid wagging motion inherent to the repetitive isomerization of the azobenzene functionality triggered the release of the dye from the pores. This light-induced release of cargo can be modulated between an on and an off state by controlling the conformation of the azobenzene with the appropriate wavelength of light. This report highlights the ability to capture and release small molecules and demonstrates the utility of self-contained photo-active switches located inside highly porous MOFs.

Functional molecules in electronic circuits

Molecular electronics is a fascinating field of research contributing to both fundamental science and future technological achievements. A promising starting point for molecular devices is to mimic existing electronic functions to investigate the potential of molecules to enrich and complement existing electronic strategies. Molecules designed and synthesized to be integrated into electronic circuits and to perform an electronic function are presented in this article. The focus is set in particular on rectification and switching based on molecular devices, since the control over these two parameters enables the assembly of memory units, likely the most interesting and economic application of molecular based electronics. Both historical and contemporary solutions to molecular rectification are discussed, although not exhaustively. Several examples of integrated molecular switches that respond to light are presented. Molecular switches responding to an electrochemical signal are also discussed. Finally, supramolecular and molecular systems with intuitive application potential as memory units due to their hysteretic switching are highlighted. Although a particularly attractive feature of molecular electronics is its close cooperation with neighbouring disciplines, this article is written from the point of view of a chemist. Although the focus here is largely on molecular considerations, innovative contributions from physics, electro engineering, nanotechnology and other scientific disciplines are equally important. However, the ability of the chemist to correlate function with structure, to design and to provide tailor-made functional molecules is central to molecular electronics.

Electroluminescence from a single nanotube-molecule-nanotube junction

The positioning of single molecules between nanoscale electrodes has allowed their use as functional units in electronic devices. Although the electrical transport in such devices has been widely explored, optical measurements have been restricted to the observation of electroluminescence from nanocrystals and nanoclusters and from molecules in a scanning tunnelling microscope setup. In this Letter, we report the observation of electroluminescence from the core of a rod-like molecule between two metallic single-walled carbon nanotube electrodes forming a rigid solid-state device. We also develop a simple model to explain the onset voltage for electroluminescence. These results suggest new characterization and functional possibilities, and demonstrate the potential of carbon nanotubes for use in molecular electronics.

A water-soluble pH-triggered molecular switch.

A bistable donor-acceptor [2]catenane, which is composed of a crown ether containing a hydroquinone unit and a 1,5-diaminonaphthalene unit, interlocked mechanically by cyclobis(paraquat-p-phenylene) as its tetrachloride, exists as a mixture of translational isomers, both in the solid state and in aqueous solution. UV/vis and (1)H NMR spectroscopies demonstrate that this isomeric mixture can be switched in water in the presence of hydrochloric acid to afford a single diprotonated derivative in which only the hydroquinone unit resides inside the cavity of the tetracationic cyclophane. Treatment with 1,4-diazabicyclo[2.2.2]octane resets the molecular switch.

Non-Interpenetrated Metal-Organic Frameworks Based on Copper(II) Paddlewheel and Oligoparaxylene-Isophthalate Linkers: Synthesis, Structure and Gas Adsorption

Two metal-organic framework materials, MFM-130 and MFM-131 (MFM = Manchester Framework Material), have been synthesized using two oligoparaxylene (OPX) tetracarboxylate linkers containing four and five aromatic rings, respectively. Both fof-type non-interpenetrated networks contain Kagomé lattice layers comprising [Cu2(COO)4] paddlewheel units and isophthalates, which are pillared by the OPX linkers. Desolvated MFM-130, MFM-130a, shows permanent porosity (BET surface area of 2173 m(2)/g, pore volume of 1.0 cm(3)/g), high H2 storage capacity at 77 K (5.3 wt% at 20 bar and 2.2 wt% at 1 bar), and a higher CH4 adsorption uptake (163 cm(3)(STP)/cm(3) (35 bar and 298 K)) compared with its structural analogue, NOTT-103. MFM-130a also shows impressive selective adsorption of C2H2, C2H4, and C2H6 over CH4 at room temperature, indicating its potential for separation of C2 hydrocarbons from CH4. The single-crystal structure of MFM-131 confirms that the methyl substituents of the paraxylene units block the windows in the Kagomé lattice layer of the framework, effectively inhibiting network interpenetration in MFM-131. This situation is to be contrasted with that of the doubly interpenetrated oligophenylene analogue, NOTT-104. Calculation of the mechanical properties of these two MOFs confirms and explains the instability of MFM-131 upon desolvation in contrast to the behavior of MFM-130. The incorporation of paraxylene units, therefore, provides an efficient method for preventing network interpenetration as well as accessing new functional materials with modified and selective sorption properties for gas substrates.

Interlinking Au nanoparticles in 2D arrays via conjugated dithiolated molecules

We investigate the importance of anchoring end-groups in conjugated oligomers for the formation of molecular junction networks. Oligo(phenylene ethynylene) with a single (OPE-MT) and two (OPE-DT) thiol end-groups have been inserted into self-assembled octanethiol-capped gold nanoparticle arrays by taking advantage of molecular exchange. Comparing the exchange for tens of devices, we observe significantly different final conductances for devices comprising monothiol- and dithiolated compounds. Our experimental results support the picture that OPE-DT covalently bridge neighboring nanoparticles via Au–S bonds at both ends of the conjugated oligomer to form interlinked networks of molecular junctions.

Three-Dimensional Architectures Incorporating Stereoregular Donor-Acceptor Stacks

We report the synthesis of two [2]catenane-containing struts that are composed of a tetracationic cyclophane (TC(4+)) encircling a 1,5-dioxynaphthalene (DNP)-based crown ether, which bears two terphenylene arms. The TC(4+) rings comprise either 1) two bipyridinium (BIPY(2+)) units or 2) a BIPY(2+) and a diazapyrenium (DAP(2+)) unit. These degenerate and nondegenerate catenanes were reacted in the presence of Cu(NO3)2⋅2.5 H2O to yield Cu-paddlewheel-based MOF-1050 and MOF-1051. The solid-state structures of these MOFs reveal that the metal clusters serve to join the heptaphenylene struts into grid-like 2D networks. These 2D sheets are then held together by infinite donor-acceptor stacks involving the [2]catenanes to produce interpenetrated 3D architectures. As a consequence of the planar chirality associated with both the DNP and hydroquinone (HQ) units present in the crown ether, each catenane can exist as four stereoisomers. In the case of the nondegenerate (bistable) catenane, the situation is further complicated by the presence of translational isomers. Upon crystallization, however, only two of the four possible stereoisomers--namely, the enantiomeric RR and SS forms--are observed in the crystals. An additional element of co-conformational selectivity is present in MOF-1051 as a consequence of the substitution of one of the BIPY(2+) units by a DAP(2+) unit: only the translational isomer in which the DAP(2+) unit is encircled by the crown ether is observed. The overall topologies of MOF-1050 and MOF-1051, and the selective formation of stereoisomers and translational isomers during the kinetically driven crystallization, provide evidence that weak noncovalent bonding interactions play a significant role in the assembly of these extended (super)structures.