Serina Siew Chen Lee

Cross-linked polyelectrolyte multilayers for marine antifouling applications

A polyionic multilayer film was fabricated by layer-by-layer (LbL) sequential deposition followed by cross-linking under mild conditions on a substrate surface to inhibit marine fouling. A novel polyanion, featuring methyl ester groups for an easy cross-linking was used as a generic solution for stabilization of LbL films in a harsh environment. Covalent cross-linking was confirmed by FTIR and XPS spectroscopy. AFM was used to observe film morphology and its variation because of cross-linking, as well as to measure the thickness of the LbL films. Cross-linking improved the stability of the LbL film when it was immersed in artificial seawater, natural seawater, and in a polar organic solvent (DMSO). No changes in the thickness and topography of the film were observed in these media. The LbL films prevented settlement of Amphibalanus amphitrite barnacle cyprids and reduced adhesion of the benthic diatom Amphora coffeaeformis. Assay results indicated that the cross-linking process did not weaken the antifouling effect of LbL films. The high stability and low degree of fouling make these coatings potentially promising candidates in marine applications.

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.

Sulfobetaine-based polymer brushes in marine environment: Is there an effect of the polymerizable group on the antifouling performance?

Three different zwitterionic polymer brush coatings for marine biofouling control were prepared by surface-initiated atom transfer radical polymerization (ATRP) of sulfobetaine-based monomers including methacrylamide (SBMAm), vinylbenzene (SBVB) and vinylimidazolium (SBVI). None of these brush systems have been assessed regarding marine antifouling performance. Antifouling tests performed indicate that surfaces featuring these three brush systems substantially reduce the adhesion of the marine microalgae, Amphora coffeaeformis, and the settlement of cyprid larvae of the barnacle, Amphibalanus amphitrite, in a similar way, displaying comparable performance. Thus, it appears that the chemical structure of the polymerizable group has no substantial influence on marine antifouling performance.

Polyion multilayers with precise surface charge control for antifouling

We report on a molecular fabrication approach to precisely control surface ζ potentials of polymeric thin layers constructed by electrostatic layer-by-layer (LbL) assembly methods. The protocol established allows us to achieve surface isoelectric points (IEP) in the pH range of 6-10. Poly(acrylic acid) (PAA, a weak polyanion) and poly(diallyldimethylammonium chloride) (PDADMAC, a strong polycation) were chosen to build up the bulk films. The weak polycation polyethylenimine (PEI) was applied as a top layer. A unique feature of this approach is that the chemical composition of the top layer is not affected by the manipulation of the ζ potential of the films. Surface charge tuning is achieved by controlling the degree of ionization of the weak polyelectrolytes at various pH values and subsequent manipulation of the amount of polyelectrolyte deposited in the penultimate and last layers, respectively. Following assembly and characterization, the films were used as candidates for antifouling surfaces. The fouling behavior of barnacle cyprids and bacteria on the LbL films with similar hydrophilicity and roughness but different surface charge densities were studied. We found that more cyprids of Amphibalanus amphitrite settled on the negatively charged LbL film compared to the neutral or positively charged LbL film. In bacterial adhesion tests employing Pseudomonas, Escherichia coli, and Staphylococcus aureus, more bacteria were observed on the positively charged LbL film compared with the neutral and negatively charged LbL films, possibly as a result of the negative potential of the bacterial cell wall. The procedures proposed allow one to adjust surface isoelectric points of LbL architectures to achieve optimal antifouling performance of a given material taking into account specific pH values of the environment and the character of the fouler.

Biomimicking micropatterned surfaces and their effect on marine biofouling.

When synthetic materials are submerged in marine environments, dissolved matter and marine organisms attach to their surfaces by a process known as marine fouling. This phenomenon may lead to diminished material performance with detrimental consequences. Bioinspired surface patterning and chemical surface modifications present promising approaches to the design of novel functional surfaces that can prevent biofouling phenomena. In this study, we report the synergistic effects of surface patterns, inspired by the marine decapod crab Myomenippe hardwickii in combination with chemical surface modifications toward suppressing marine fouling. M. hardwickii is known to maintain a relatively clean carapace although the species occurs in biofouling communities of tropical shallow subtidal coastal waters. Following the surface analysis of selected specimens, we designed hierarchical surface microtopographies that replicate the critical features observed on the crustacean surface. The micropatterned surfaces were modified with zwitterionic polymer brushes or with layer-by-layer deposited polyelectrolyte multilayers to enhance their antifouling and/or fouling-release potential. Chemically modified and unmodified micropatterned surfaces were subjected to extensive fouling tests, including laboratory assays against barnacle settlement and algae adhesion, and field static immersion tests. The results show a statistically significant reduction in settlement on the micropatterned surfaces as well as a synergistic effect when the microtopographies are combined with grafted polymer chains.

Natural antifoulants from the marine cyanobacterium Lyngbya majuscula

Filamentous benthic marine cyanobacteria are a prolific source of structurally unique bioactive secondary metabolites. A total of 12 secondary metabolites, belonging to the mixed polyketide–polypeptide structural class, were isolated from the marine cyanobacterium, Lyngbya majuscula, and were tested to determine if they showed activity against barnacle larval settlement. The assays revealed four compounds, dolastatin 16 (1), hantupeptin C (4), majusculamide A (10), and isomalyngamide A (12), that showed moderate to potent anti-larval settlement activities, with EC50 values ranging from 0.003 to 10.6 μg ml−1. In addition, field testing conducted over a period of 28 days (using the modified Phytagel™ method) based on the cyanobacterial compound, dolastatin 16, showed significantly reduced barnacle settlement as compared to controls at all the concentrations tested. The results of this study highlight the importance of marine cyanobacteria as an underexplored source of potential environmentally friendly antifoulants.

Dual hydrophilic and salt responsive schizophrenic block copolymers – synthesis and study of self-assembly

A new class of dual hydrophilic diblock copolymers (BCPs) possessing poly(ethylene glycol) (PEG) and zwitterionic polysulfabetaine (PSB) was synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization. These BCPs formed schizophrenic micelles undergoing core–shell transitions upon changing the medium from deionized water to an electrolyte solution. “Conventional” micelles, i.e. PSB at the core and PEG at the periphery, were formed in deionized water. The micelles “inverted” to form PSB at the shell and PEG at the core in electrolyte solutions. The reversal of core–shell structures was thoroughly studied by 1H-NMR spectroscopic analysis, dynamic light scattering (DLS) and transmission electron microscopic (TEM) techniques. Antifouling evaluation in the sea indicated that BCPs displayed antifouling behaviour to some extent. The dual hydrophilic BCPs reported here are potentially useful as stimuli responsive materials.

Marine biofouling field tests, settlement assay and footprint micromorphology of cyprid larvae of Balanus amphitrite on model surfaces

Atomic force microscopy (AFM), laboratory settlement assays and field tests were used to correlate cyprid footprint (FP) morphology with the behaviour of cyprids on different substrata. AFM imaging under laboratory conditions revealed more porous and larger FPs on glass exposing a CH3-surface than on aminosilane functionalised (NH2-) surfaces. The secreted FP volume was found to be similar on both substrata (2.1–2.6 μm3). Laboratory settlement assays and marine field tests were performed on three substrata, viz. untreated clean glass, NH2-glass, and CH3-glass. The results distinguished settlement preferences for NH2-glass and untreated glass over CH3-terminated surfaces, suggesting that cyprids favour settling on hydrophilic over hydrophobic surfaces. On combining observations from different length scales, it is speculated that the confined FP size on NH2-glass may induce a higher concentration of the settlement inducing protein complex. Settlement may be further facilitated by a stronger adherence of FP adhesives to the NH2-surface via Coulombic interactions.

Barnacle larvae exploring surfaces with variable hydrophilicity: Influence of morphology and adhesion of "footprint" proteins by AFM

Interaction forces of adhesive proteins employed by cyprid larvae of Amphibalanus amphitrite for temporary attachment during surface exploration in marine fouling were studied by AFM force spectroscopy using chemically modified, reactive colloidal probes. The proteins were covalently attached to the surfaces of the probes by incubation in the protein deposits (footprints) left behind at the surface by the cyprids. This covalent coupling enabled robust and reproducible probing of adhesion of the attachment proteins to model surfaces with variable hydrophilicity. Three model monolayer surfaces were designed and prepared that exhibited different wettabilities derived from variations in the monolayer chemical composition. The morphology and size of cyprid protein deposits was imaged by AFM. The deposits showed larger area of spreading on more hydrophobic surfaces, whereas the overall volume of the secreted proteins exhibited no significant variation. Notable difference in adhesion forces was found among the surfaces by force spectroscopy, with substantially higher values measured on the hydrophobic surface (21 ± 2 nN) than that measured on the more hydrophilic surface (7.2 ± 1 nN). The same surfaces were also tested in laboratory essays. Rather surprisingly, no significant differences were found in values of fractional cyprid settlement among the surfaces studied, indicating that variations of surface wettability and adhesion strength of settlement proteins may be insufficient to explain settlement trends.

A novel geometry for a laboratory-based larval settlement assay

A novel configuration, consisting of two apposing surfaces bounding a vertical water column, is presented and evaluated for settlement assays using cyprids of Balanus amphitrite. Assays were conducted on planar surfaces, ranging from hydrophobic polystyrene to hydrophilic glass and including CH3- and NH3 +-terminated self-assembled monolayers (SAMs). Identical apposing surfaces generated settlement rates comparable to those obtained in prior studies, while a choice assay yielded consistent results, with individual replicates each indicating the preferred surface for settlement. As gravity favours contact with the lower apposing surface, cyprids trapped at the air/water interface settled on or around the perimeter where the water column meets the lower substratum. These cyprids are capable of selecting a settlement location and are thus not lost to the assay. The assay geometry lends itself to assessing cyprid exploration and settlement on planar surfaces with chemical patterning, including relief microstructures, without using a confining material or requiring the coating of a three-dimensional well.