Seung Hun Park

A computer-designed scaffold for bone regeneration within cranial defect using human dental pulp stem cells

A computer-designed, solvent-free scaffold offer several potential advantages such as ease of customized manufacture and in vivo safety. In this work, we firstly used a computer-designed, solvent-free scaffold and human dental pulp stem cells (hDPSCs) to regenerate neo-bone within cranial bone defects. The hDPSCs expressed mesenchymal stem cell markers and served as an abundant source of stem cells with a high proliferation rate. In addition, hDPSCs showed a phenotype of differentiated osteoblasts in the presence of osteogenic factors (OF). We used solid freeform fabrication (SFF) with biodegradable polyesters (MPEG-(PLLA-co-PGA-co-PCL) (PLGC)) to fabricate a computer-designed scaffold. The SFF technology gave quick and reproducible results. To assess bone tissue engineering in vivo, the computer-designed, circular PLGC scaffold was implanted into a full-thickness cranial bone defect and monitored by micro-computed tomography (CT) and histology of the in vivo tissue-engineered bone. Neo-bone formation of more than 50% in both micro-CT and histology tests was observed at only PLGC scaffold with hDPSCs/OF. Furthermore, the PLGC scaffold gradually degraded, as evidenced by the fluorescent-labeled PLGC scaffold, which provides information to tract biodegradation of implanted PLGC scaffold. In conclusion, we confirmed neo-bone formation within a cranial bone defect using hDPSCs and a computer-designed PLGC scaffold.

In Vivo Osteogenic Differentiation of Human Dental Pulp Stem Cells Embedded in an Injectable In Vivo-Forming Hydrogel.

In this study, human dental pulp stem cells (hDPSCs) are examined as a cellular source for bone tissue engineering using an in vivo-forming hydrogel. The hDPSCs are easily harvested in large quantities from extracted teeth. The stemness of harvested hDPSCs indicates their relative tolerance to ex vivo manipulation in culture. The in vitro osteogenic differentiation of hDPSCs is characterized using Alizarin Red S (ARS), von Kossa (VK), and alkaline phosphatase (ALP) staining. The solution of hDPSCs and a methoxy polyethylene glycol-polycaprolactone block copolymer (PC) is easily prepared by simple mixing at room temperature and in no more than 10 s it forms in vivo hydrogels after subcutaneous injection into rats. In vivo osteogenic differentiation of hDPSCs in the in vivo-forming hydrogel is confirmed by micro-computed tomography (CT), histological staining, and gene expression. Micro-CT analysis shows evidence of significant tissue-engineered bone formation in hDPSCs-loaded hydrogel in the presence of osteogenic factors. Differentiated osteoblasts in in vivo-forming hydrogel are identified by ARS and VK staining and are found to exhibit characteristic expression of genes like osteonectin, osteopontin, and osteocalcin. In conclusion, hDPSCs embedded in an in vivo-forming hydrogel may provide benefits as a noninvasive formulation for bone tissue engineering applications.

BMP2-modified injectable hydrogel for osteogenic differentiation of human periodontal ligament stem cells

This is the first report on the development of a covalently bone morphogenetic protein-2 (BMP2)-immobilized hydrogel that is suitable for osteogenic differentiation of human periodontal ligament stem cells (hPLSCs). O-propargyl-tyrosine (OpgY) was site-specifically incorporated into BMP2 to prepare BMP2-OpgY with an alkyne group. The engineered BMP2-OpgY exhibited osteogenic characteristics after in vitro osteogenic differentiation of hPLSCs, indicating the osteogenic ability of BMP2-OpgY. A methoxy polyethylene glycol-(polycaprolactone-(N3)) block copolymer (MC-N3) was prepared as an injectable in situ-forming hydrogel. BMP2 covalently immobilized on an MC hydrogel (MC-BMP2) was prepared quantitatively by a simple biorthogonal reaction between alkyne groups on BMP2-OpgY and azide groups on MC-N3 via a Cu(I)-catalyzed click reaction. The hPLSCs-loaded MC-BMP2 formed a hydrogel almost immediately upon injection into animals. In vivo osteogenic differentiation of hPLSCs in the MC-BMP2 formulation was confirmed by histological staining and gene expression analyses. Histological staining of hPLSC-loaded MC-BMP2 implants showed evidence of mineralized calcium deposits, whereas hPLSC-loaded MC-Cl or BMP2-OpgY mixed with MC-Cl, implants showed no mineral deposits. Additionally, MC-BMP2 induced higher levels of osteogenic gene expression in hPLSCs than in other groups. In conclusion, BMP2-OpgY covalently immobilized on MC-BMP2 induced osteogenic differentiation of hPLSCs as a noninvasive method for bone tissue engineering.

Preparation and Evaluation of Dexamethasone-Loaded Electrospun Nanofiber Sheets as a Sustained Drug Delivery System

Recently, electrospinning technology has been widely used as a processing method to make nanofiber sheets (NS) for biomedical applications because of its unique features, such as ease of fabrication and high surface area. To develop a sustained dexamethasone (Dex) delivery system, in this work, poly(ε-caprolactone-co-l-lactide) (PCLA) copolymer with controllable biodegradability was synthesized and further utilized to prepare electrospun Dex-loaded NS using water-insoluble Dex (Dex(b)) or water-soluble Dex (Dex(s)). The Dex-NS obtained by electrospinning exhibited randomly oriented and interconnected fibrillar structures. The in vitro and in vivo degradation of Dex-NS was confirmed over a period of a few weeks by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR). The evaluation of in vitro and in vivo Dex(b) and Dex(s) release from Dex-NS showed an initial burst of Dex(b) at day 1 and, thereafter, almost the same amount of release as Dex(b) for up to 28 days. In contrast, Dex(s)-NS exhibited a small initial burst of Dex(s) and a first-order releasing profile from Dex-NS. In conclusion, Dex-NS exhibited sustained in vitro and in vivo Dex(s) release for a prolonged period, as well as controlled biodegradation of the NS over a defined treatment period.

An Injectable, Click-Cross-Linked Small Intestinal Submucosa Drug Depot for the Treatment of Rheumatoid Arthritis

Here, a click-cross-linked small intestine submucosa (SIS) drug depot is described for the treatment of rheumatoid arthritis (RA). To the best of the knowledge, there have been no studies related to the intra-articular injection of methotrexate (Met)-loaded click-cross-linkable SIS (Met-loaded Cx-SIS) for RA treatment. As the key objective of this work, injectable formulations of tetrazine-modified SIS (TE-SIS) and transcyclooctene-modified SIS (TC-SIS) are employed as drug depots. Within a few seconds, the simple mixing of equal amounts of TE-SIS and TC-SIS suspensions forms a gelatinous click-cross-linked SIS (Cx-SIS) drug depot in vitro and in vivo. The formed Cx-SIS depot is maintained in the articular joint over an extended period, while SIS alone rapidly disappears. Injectable formulations of Met-loaded Cx-SIS and Met-loaded SIS are prepared and then injected into articular joints to form drug depots. Compared to animals treated with Met-loaded SIS, RA animals treated with Met-loaded Cx-SIS show effective RA repair, as well as extensive regeneration of chondrocytes and glycosaminoglycan deposits. Collectively, these results indicate that the Met-loaded Cx-SIS depot is successfully formed after intra-articular injection of click-cross-linkable SIS, and that this formulation induces long-lasting Met release and allows Met to act effectively in the articular joint, resulting in RA repair.

Preparation of Extracellular Matrix Developed Using Porcine Articular Cartilage and In Vitro Feasibility Study of Porcine Articular Cartilage as an Anti-Adhesive Film

In this study, we examined whether porcine articular cartilage (PAC) is a suitable and effective anti-adhesive material. PAC, which contained no non-collagenous tissue components, was collected by mechanical manipulation and decellularization of porcine knee cartilage. The PAC film for use as an anti-adhesive barrier was easily shaped into various sizes using homemade silicone molds. The PAC film was cross-linked to study the usefulness of the anti-adhesive barrier shape. The cross-linked PAC (Cx-PAC) film showed more stable physical properties over extended periods compared to uncross-linked PAC (UnCx-PAC) film. To control the mechanical properties, Cx-PAC film was thermally treated at 45 °C or 65 °C followed by incubation at room temperature. The Cx-PAC films exhibited varying enthalpies, ultimate tensile strength values, and contact angles before and after thermal treatment and after incubation at room temperature. Next, to examine the anti-adhesive properties, human umbilical vein endothelial cells (HUVECs) were cultured on Cx-PAC and thermal-treated Cx-PAC films. Scanning electron microscopy, fluorescence, and MTT assays showed that HUVECs were well adhered to the surface of the plate and proliferated, indicating no inhibition of the attachment and proliferation of HUVECs. In contrast, Cx-PAC and thermal-treated Cx-PAC exhibited little and/or no cell attachment and proliferation because of the inhibition effect on HUVECs. In conclusion, we successfully developed a Cx-PAC film with controllable mechanical properties that can be used as an anti-adhesive barrier.

Thermoresponsive and Biodegradable Amphiphilic Block Copolymers with Pendant Functional Groups

BACKGROUND:To develop the biodegradability and thermoresponsive hydrogel, in this work we designed a pendant-functionalized, thermoresponsive, amphiphilic block copolymer.METHODS:Methoxy poly(ethylene glycol) (MPEG)-b-[poly(ε-caprolactone)-ran-poly(ε-caprolactone-3-one)-ran-polylactic acid] (MCL) and (MPEG-b-[PCL-ran-POD-ran-PLA]) [MCL-(CO)] block copolymers were prepared by ring-opening polymerization of ε-caprolactone, OD and lactide monomers. The subsequent derivatization of MCL-(CO) provided MPEG-b-[PCL-ran-poly(ε-caprolactone-3-COOH)-ran-PLA] [MCL-(COOH)] with COOH pendant groups and MPEG-b-[PCL-ran-poly(ε-caprolactone-3-NH2)-ran-PLA] [MCL-(NH2)] with NH2 pendant groups.RESULTS:The measured segment ratios of MCL-(CO), MCL-(COOH), and MCL-(NH2) agreed well with the target ratios. The abundances of the COOH and NH2 groups in the MCL-(COOH) and MCL-(NH2) copolymers were determined by 1H- and 13C-nuclear magnetic resonance spectroscopy, and agreed well with the target abundances. MCL-(CO), MCL-(COOH), and MCL-(NH2) formed homogeneous, white, opaque emulsions at room temperature. Rheological analysis of the block copolymer suspensions indicated a solution-to-hydrogel phase transition as a function of temperature. The solution-to-hydrogel phase transitions and the biodegradation of MCL-(CO), MCL-(COOH), and MCL-(NH2) were affected by varying the type (ketone, COOH, or NH2) and abundance of the pendant groups.CONCLUSION:MCL-(CO), MCL-(COOH), and MCL-(NH2) with ketone, COOH, and NH2 pendant groups showed solution-to-hydrogel phase transitions and biodegradation behaviors that depended on both the type and number of pendant groups.

Polystyrene Chain Growth from Di-End-Functional Polyolefins for Polystyrene-Polyolefin-Polystyrene Block Copolymers

Triblock copolymers of polystyrene (PS) and a polyolefin (PO), e.g., PS-block-poly(ethylene-co-1-butene)-block-PS (SEBS), are attractive materials for use as thermoplastic elastomers and are produced commercially by a two-step process that involves the costly hydrogenation of PS-block-polybutadiene-block-PS. We herein report a one-pot strategy for attaching PS chains to both ends of PO chains to construct PS-block-PO-block-PS directly from olefin and styrene monomers. Dialkylzinc compound containing styrene moieties ((CH2=CHC6H4CH2CH2)2Zn) was prepared, from which poly(ethylene-co-propylene) chains were grown via “coordinative chain transfer polymerization” using the pyridylaminohafnium catalyst to afford di-end functional PO chains functionalized with styrene and Zn moieties. Subsequently, PS chains were attached at both ends of the PO chains by introduction of styrene monomers in addition to the anionic initiator Me3SiCH2Li·(pmdeta) (pmdeta = pentamethyldiethylenetriamine). We found that the fraction of the extracted PS homopolymer was low (~20%) and that molecular weights were evidently increased after the styrene polymerization (ΔMn = 27–54 kDa). Transmission electron microscopy showed spherical and wormlike PS domains measuring several tens of nm segregated within the PO matrix. Optimal tensile properties were observed for the sample containing a propylene mole fraction of 0.25 and a styrene content of 33%. Finally, in the cyclic tensile test, the prepared copolymers exhibited thermoplastic elastomeric properties with no breakage up over 10 cycles, which is comparable to the behavior of commercial-grade SEBS.

Temperature-responsive hydrogels via the electrostatic interaction of amphiphilic diblock copolymers with pendant-ion groups

In this work, we prepared amphiphilic polyester diblock copolymers with pendant ion groups and examined the formation of temperature-responsive hydrogels via the electrostatic interaction of cationic or anionic pendant groups. We prepared methoxy polyethylene glycol-b-poly(e-caprolactone) (MC) diblock copolymers with a carboxylic acid (MC-COOH) or an amine (MC-NH2) (3–13 mol%) at the pendant position of the hydrophobic polyester segments. The MC-COOH and MC-NH2 were polyelectrolytes with negative and positive zeta potentials, respectively. Each MC-COOH or MC-NH2 suspension exhibited sol-to-gel phase transition with dependence on the identities and concentrations of the pendant group. The mixed suspensions of the MC-COOH and MC-NH2 also exhibited sol-to-gel phase transitions via attractive electrostatic interactions. The quantitative net zeta potential of the MC-COOH and MC-NH2 was due to the attractive electrostatic interactions between the COOH and NH2 pendant groups on the MC segments. The suspensions of the MC-(COO−Na+)10 with calcium chloride (CaCl2) and MC-(NH3+Cl−)10 with malonic acid (MA) exhibited gel-to-sol phase transitions, albeit slightly, with dependence on the identities and concentrations of the CaCl2 and MA. Each MC-COOH or MC-NH2 suspension, mixed suspension, and suspension with its corresponding counter ions showed crystallinity, indicating hydrophobic aggregation between the hydrophobic MC segments with dependence on the electrostatic interactions between the polyelectrolytes. In summary, we developed temperature-responsive hydrogels via the electrostatic interactions of MC-COOH and MC-NH2.

Preparation of “Constrained Geometry” Titanium Complexes of [1,2]Azasilinane Framework for Ethylene/1-Octene Copolymerization

The Me2Si-bridged ansa-Cp/amido half-metallocene, [Me2Si(η5-Me4C5)(NtBu)]TiCl2, termed a “constrained-geometry catalyst (CGC)”, is a representative homogeneous Ziegler catalyst. CGC derivatives with the [1,2]azasilinane framework, in which the amide alkyl substituent is joined by the Si-bridge, were prepared, and the catalytic performances of these species was studied. Me4C5HSi(Me)(CH2CH=CH2)-NH(C(R)(R’)CH=CH2) (R, R’ = H or methyl; Me4C5H = tetramethylcyclopentadienyl) was susceptible to ring closure metathesis (RCM) when treated with Schrock’s Mo-catalyst to afford -Si(Me4C5H)(Me)CH2CH=CHC(R)(R’)NH- containing a six-membered ring framework. Using the precursors and the products of RCM, various CGC derivatives, i.e., [-Si(η5-Me4C5)(Me)CH2CH=CHC(R)(H)N-]TiMe2 (13, R = H; 15, R = Me), [-Si(η5-Me4C5)(Me)CH2CH2CH2CH2N]TiMe2 (14), [(η5-Me4C5)Si(Me)(CH2CH=CH2)NCH2CH=CH2]TiMe2 (16), [(η5-Me4C5)Si (Me)(CH=CH2)NCH2CH=CH2]TiMe2 (17), and [(η5-Me4C5)Si(Me)(CH2CH3)NCH2CH2CH3]TiMe2 (18), were prepared. The catalytic activity of the newly prepared complexes was lower than that of CGC when activated with [Ph3C][B(C6F5)4]/iBu3Al. However, the catalytic activity of these species was improved by using tetrabutylaluminoxane ([iBu2Al]2O) instead of iBu3Al and the activity of 14/[Ph3C][B(C6F5)4]/[iBu2Al]2O was comparable to that of CGC/[Ph3C][B(C6F5)4]/iBu3Al (4.7 and 5.0 × 106 g/mol-Ti, respectively). Advantageously, the newly prepared complexes produced higher molecular weight poly(ethylene-co-1-octene)s than CGC.