Seungwoo Shin

Comparative study of iterative reconstruction algorithms for missing cone problems in optical diffraction tomography

In optical tomography, there exist certain spatial frequency components that cannot be measured due to the limited projection angles imposed by the numerical aperture of objective lenses. This limitation, often called as the missing cone problem, causes the under-estimation of refractive index (RI) values in tomograms and results in severe elongations of RI distributions along the optical axis. To address this missing cone problem, several iterative reconstruction algorithms have been introduced exploiting prior knowledge such as positivity in RI differences or edges of samples. In this paper, various existing iterative reconstruction algorithms are systematically compared for mitigating the missing cone problem in optical diffraction tomography. In particular, three representative regularization schemes, edge preserving, total variation regularization, and the Gerchberg-Papoulis algorithm, were numerically and experimentally evaluated using spherical beads as well as real biological samples; human red blood cells and hepatocyte cells. Our work will provide important guidelines for choosing the appropriate regularization in ODT.

Optical diffraction tomography techniques for the study of cell pathophysiology

Three-dimensional imaging of biological cells is crucial for the investigation of cell biology, provide valuable information to reveal the mechanisms behind pathophysiology of cells and tissues. Recent advances in optical diffraction tomography (ODT) have demonstrated the potential for the study of various cells with its unique advantages of quantitative and label-free imaging capability. To provide insight on this rapidly growing field of research and to discuss its applications in biology and medicine, we present the summary of the ODT principle and highlight recent studies utilizing ODT with the emphasis on the applications to the pathophysiology of cells.

Design of a LiNbO 3 ribbon waveguide for efficient difference-frequency generation of terahertz wave in the collinear configuration

We propose and investigate a ribbon waveguide for difference-frequency generation of terahertz (THz) wave from infrared light sources. The proposed ribbon waveguide is composed of a nonlinear optic crystal and has a thickness less than the wavelength of the THz wave to support the surface-wave mode in the THz region. By utilizing the waveguide dispersion of the surface-wave mode, the phase matching condition between infrared pump, idler and THz waves can be realized in the collinear configuration. Owing to the weak mode confinement of the THz wave, the absorption coefficient can also be reduced. We design the ribbon waveguide which uses LiNbO(3) crystal and discuss the phase-matching condition for DFG of THz wave. Highly efficient THz-wave generation is confirmed by numerical simulations.

Time-multiplexed structured illumination using a DMD for optical diffraction tomography

We present a time-multiplexing structured illumination control technique for optical diffraction tomography (ODT). Instead of tilting the angle of illumination, time-multiplexed sinusoidal illumination is exploited using a digital micromirror device (DMD). The present method effectively eliminates unwanted diffracted beams from binary DMD patterns, which deteriorates the image quality of the ODT in the previous binary Lee hologram method. We experimentally show the feasibility and advantage of the present method by reconstructing three-dimensional refractive index distributions of various samples and comparing with a conventional Lee hologram method.

Optical diffraction tomography using a digital micromirror device for stable measurements of 4D refractive index tomography of cells

Optical diffraction tomography (ODT) is an interferometric microscopy technique capable of measuring 3-D refractive index (RI) distribution of transparent samples. Multiple 2-D holograms of a sample illuminated with various angles are measured, from which 3-D RI map of the sample is reconstructed via the diffraction theory. ODT has been proved as a powerful tool for the study of biological cells, due to its non-invasiveness, label-free and quantitative imaging capability. Recently, our group has demonstrated that a digital micromirror device (DMD) can be exploited for fast and precise control of illumination beams for ODT. In this work, we systematically study the precision and stability of the ODT system equipped with a DMD and present measurements of 3-D and 4-D RI maps of various types of live cells including human red blood cells, white blood cells, hepatocytes, and HeLa cells. Furthermore, we also demonstrate the effective visualization of 3-D RI maps of live cells utilizing the measured information about the values and gradient of RI tomograms.

Common-path diffraction optical tomography with a low-coherence illumination for reducing speckle noise

Common-path diffraction optical tomography (cDOT) is a non-invasive and label-free optical holographic technique for measuring both the three-dimensional refractive index (RI) tomograms and two-dimensional dynamic phase images of a sample. Due to common-path geometry, cDOT provides quantitative phase imaging with high phase sensitivity. However, the image quality of the cDOT suffers from speckle noise; the use of a monochromatic laser inevitably results in the formation of parasitic fringe patterns in measured quantitative phase images. Here, we present a technique to reduce speckle noise in the cDOT using a low-coherence illumination source. Utilizing a Ti-sapphire pulsed laser in the cDOT, we achieved the reduction of speckle noise in both the three-dimensional RI tomograms and two-dimensional dynamic phase images.

Three-dimensional label-free imaging and analysis of Pinus pollen grains using optical diffraction tomography

The structure of pollen grains is related to the reproductive function of the plants. Here, three-dimensional (3D) refractive index maps were obtained for individual conifer pollen grains using optical diffraction tomography (ODT). The 3D morphological features of pollen grains from pine trees were investigated using measured refractive index maps, in which distinct substructures were clearly distinguished and analyzed. Morphological and physiochemical parameters of the pollen grains were quantified from the obtained refractive index (RI) maps and used to quantitatively study the interspecific differences of pollen grains from different strains. Our results demonstrate that ODT can assess the structure of pollen grains. This label-free and rapid 3D imaging approach may provide a new platform for understanding the physiology of pollen grains.

Label-free non-invasive quantitative measurement of lipid contents in individual microalgal cells using refractive index tomography

Microalgae are promising candidates for biofuel production due to their high lipid content. To facilitate utilization of the microalgae for biofuel, rapid quantification of the lipid contents in microalgae is necessary. However, conventional methods based on the chemical extraction of lipids require a time-consuming destructive extraction process. Here, we demonstrate label-free, non-invasive, rapid quantification of the lipid contents in individual micro-algal cells measuring the three-dimensional refractive index tomograms. We measure three-dimensional refractive index distributions within Nannochloropsis oculata cells and find that lipid droplets are identifiable in tomograms by their high refractive index. In addition, we alter N. oculata under nitrogen deficiency by measuring the volume, lipid weight, and dry cell weight of individual cells. Characterization of individual cells allows correlative analysis between the lipid content and size of individual cells.

Effects of spatiotemporal coherence on interferometric microscopy

Illumination coherence plays a major role in various imaging systems, from microscopy, metrology, digital holography, optical coherence tomography, to ultrasound imaging. Here, we present a systematic study on the effects of degrees of spatiotemporal coherence of an illumination (DSTCI) on imaging quality of interferometric microscopy. An optical field with arbitrary DSTCI was decomposed into wavelets with constituent spatiotemporal frequencies, and the effects on image quality were quantitatively investigated. The results show the synergistic effects on reduction of speckle noise when DSTCI is decreased. This study presents a method to systematically control DSTCI, and the result provides an essential reference on the effects of DSTCI on the imaging quality. We believe that the presented methods and results can be implemented in various imaging systems for characterizing and improving the imaging quality.

Generalized image deconvolution by exploiting the transmission matrix of an optical imaging system

Intact optical information of an object delivered through an imaging system is deteriorated by imperfect optical elements and unwanted defects. Image deconvolution has been widely exploited as a recovery technique due to its practical feasibility, and operates by assuming linear shift-invariant property of the imaging system. However, shift invariance does not rigorously hold in all imaging situations and is not a necessary condition for solving an inverse problem of light propagation. Several improved deconvolution techniques exploiting spatially variant point spread functions have been proposed in previous studies. However, the full characterization of an optical imaging system for compensating aberrations has not been considered. Here, we present a generalized method to solve the linear inverse problem of coherent light propagations without any regularization method or constraint on shift invariance by fully measuring the transmission matrix of the imaging system. Our results show that severe aberrations produced by a tilted lens or an inserted disordered layer can be corrected properly only by the proposed generalized image deconvolution. This work generalizes the theory of image deconvolution, and enables distortion-free imaging under general imaging condition.