Severino Angelo Maria Bussino

High altitude test of RPCs for the Argo YBJ experiment

Abstract A 50 m 2 RPC carpet was operated at the YanBaJin Cosmic Ray Laboratory (Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive Air Showers was studied. Efficiency and time-resolution measurements at the pressure and temperature conditions typical of high mountain laboratories, are reported.A 50 m**2 RPC carpet was operated at the YangBaJing Cosmic Ray Laboratory (Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive Air Showers was studied. Efficiency and time resolution measurements at the pressure and temperature conditions typical of high mountain laboratories, are reported.

Results from the ARGO-YBJ test experiment

Abstract A resistive plate counters (RPCs) carpet of ∼50 m 2 has been put in operation in the Yangbajing Laboratory (Tibet, P.R. China) at 4300 m a.s.l., in order to study the RPCs performance at high altitude and the detector capability of imaging the EAS disc. This test has been performed in view of an enlarged use of RPCs for the ARGO-YBJ experiment. This experiment will be devoted to a wide range of fundamental issues in cosmic rays and astroparticle physics, including in particular γ-ray astronomy and γ-ray bursts physics at energies ⩾100 GeV. In this paper we present and discuss the procedures adopted to calibrate the detector and reconstruct the shower direction. Results concerning many shower features as the angular distribution, the density spectrum, the time profile of the shower front, are found well consistent with the expectation.

The use of RPC in the ARGO-YBJ project

We present the ARGO-YBJ experiment, a full coverage detector placed at high altitude (∼4300 m a.s.l.) that exploits the RPC technique. Results of a test experiment performed at Yanbajing site, with a full coverage RPC carpet of 50 m2 are also presented.

Performance of the RPCs for the ARGO detector operated at the YangBaJing laboratory (4300 m a.s.l.)

Bakelite RPCs, assembled according to the ARGO design, have been operated in the high altitude Laboratory of YBJ using dedicated electronics to pick-up the streamer signal. Here we report on the results concerning absorbed current, single counting rate, efficiency and time resolution. Environmental data concerning the operating temperature inside the ARGO experimental hall are also reported.

The NOE detector for a long baseline neutrino oscillation experiment

Abstract The project of a large underground experiment, NOE (Neutrino Oscillation Experiment), composed by modules of scintillating fiber calorimeter interleaved with TRD modules, total weight 6.7 ktons, is presented. This apparatus has been optimized for long baseline neutrino oscillation studies, in particular to be sensitive in the region of sin2 2θ and Δm2 suggested by the atmospheric neutrino anomaly (fig. 3).

Results from the analysis of data collected with a 50m(2) RPC carpet at YangBaJing

An RPC carpet covering similar to 10(4) m(2) (ARGO-YBJ experiment) will be installed in the YangBaJing Laboratory (Tibet, Peoples Republic of China) at an altitude of 4300 m a.s.l. A test-module of similar to 50 m(2) has been put in operation in this laboratory and about 10(6) air shower events have been collected. The RPC performance at high altitude and the carpet capability of reconstructing the shower features are presented

Status of the ARGO-YBJ experiment

The ARGO‐YBJ experiment, under construction at the Yangbaijing Laboratory (P.R. China, 4300 m a.s.l.), is a full coverage detector of dimension 74 × 78 m2 made by a single layer of Resistive Plate Counters. About 10% of the final active area (∼ 700 m2) is in stable operation to check the detector performance and the reconstruction algorithms. In this paper the status of the experiment and the analysis of the first data are presented.