Shahrzad Missaghi

A novel approach in the assessment of polymeric film formation and film adhesion on different pharmaceutical solid substrates

The purpose of this study was to evaluate the nature of film formation on tablets with different compositions, using confocal laser scanning microscopy (CLSM), and to measure film adhesion via the application of a novel “magnet probe test”. Three excipients, microcrystalline cellulose (MCC), spray-dried lactose monohydrate, and dibasic calcium phosphate dihydrate, were individually blended with 0.5% magnesium stearate, as a lubricant, and 2.5% tetracycline HCl, as a fluorescent marker, and were compressed using a Carver press. Tablets were coated with a solution consisting of 7% hydroxypropyl methylcellulose (HPMC) phthalate (HP-55), and 0.5% cetyl alcohl in acetone and isopropanol (11:9). The nature of polymer interaction with the tablets and coating was evaluated using CLSM and a designed magnet probe test. CLSM images clearly showed coating efficiency, thickness, and uniformity of film formation, and the extent of drug migration into the film at the coating interfaces of tablets. Among the excipients, MCC demonstrated the best interface for both film formation and uniformity in thickness relative to lactose monohydrate and dibasic calcium phosphate dihydrate. The detachment force of the coating layers from the tablet surfaces, as measured with the developed magnet probe test, was in the order of MCC>lactose monohydrate>dibasic calcium phosphate dihydrate. It was also shown that the designed magnet probe test provides reliable and reproducible results when used for measurement of film adhesion and bonding strength.

Application of Powder Rheometer to Determine Powder Flow Properties and Lubrication Efficiency of Pharmaceutical Particulate Systems

The objective of this study was to understand the behavior of particulate systems under different conditions of shear dynamics before and after granulation and to investigate the efficiency of powder lubrication. Three drug powders, metronidazole, colloidal bismuth citrate, and tetracycline hydrochloride, were chosen as model drugs representing noncohesive and cohesive powder systems. Each powder was individually granulated with microcrystalline cellulose and 5%PVP as a binder. One portion from each granulation was lubricated with different levels of magnesium stearate for 5 minutes. The powder characterization was performed on the plain powders, nonlubricated and lubricated granules using powder rheometer equipped with a helical blade rotating and moving under experimentally fixed set of parameters. The profiles of interaction during the forcedistance measurements indicate that powder compresses, expands, and shears many times in a test cycle. Test profiles also clearly reveal existence of significant differences between cohesive and noncohesive powders. In all cases lubrication normalized the overall interactive nature of the powder by reducing peaks and valleys as observed from the profiles and reduced the frictional effect. The developed methods are easy to perform and will allow formulation scientists to better understand powder behavior and help in predicting potential impact of processing factors on particulate systems.

Investigation of the Effects of Hydroalcoholic Solutions on Textural and Rheological Properties of Various Controlled Release Grades of Hypromellose

Hypromellose (hydroxypropyl methylcellulose, HPMC) matrices are widely used in the formulation of sustained release dosage forms. The integrity and performance of an HPMC matrix formulation depends on rapid hydration and gel formation upon ingestion. Due to the recent alert issued by the Food and Drug Administration regarding the potential negative influence of alcoholic beverages on extended release (ER) formulations, several researchers have evaluated the potential influence of hydroalcoholic media on drug release from ER dosage forms. It has been reported that HPMC matrix formulations do not show “dose dumping” in hydroalcoholic media. The purpose of this study was a fundamental investigation on the effect of hydroalcoholic solutions (0–40% v/v ethanol) on textural and rheological properties of different viscosity grades of neat HPMC, as the functional ingredient within a hydrophilic matrix. In general, hydroalcoholic solutions had little effect on gel formation and mechanical properties of hydrated compacts, while the rheological behavior of HPMC showed dependency on the ethanol content of such solutions.

Application of ethylcellulose coating to hydrophilic matrices: a strategy to modulate drug release profile and reduce drug release variability.

Hydrophilic matrix tablets are commonly used for extended release dosage forms. For low aqueous-solubility drugs, there may be challenges in modulation of release profiles and achieving consistent release in physiological conditions. To evaluate potential formulation strategies, matrix tablets of a low-soluble drug, hydrochlorothiazide, were developed using hypromellose and two fillers of different solubility, lactose (soluble) or partially pregelatinized maize starch (partially soluble). Additionally, application of an insoluble barrier membrane, aqueous ethylcellulose coating system, and a hydrophilic pore former onto matrix tablets was evaluated. Drug release from uncoated matrix tablets was variable at different agitation rates. Evaluation of tablets in bio-relevant media using physiologically relevant residence time indicated variable and higher initial release rate for uncoated matrices containing lactose but more robust behavior for tablets containing partially pregelatinized starch. Such in vitro behavior may lead to erratic drug release in vivo, when comparing fed versus fasted conditions. Dissolution profiles from barrier membrane-coated tablets showed initial delay, followed by zero-order release kinetics, with reduction or elimination of variability compared to uncoated matrices. Such reduced variability may mitigate mechanical effects of post-prandial stomach. Effects of coating weight gain and inclusion levels of pore former were evaluated and found to be critical in achieving robust and stable release profiles.

Investigation of Critical Core Formulation and Process Parameters for Osmotic Pump Oral Drug Delivery

Push–pull osmotic pump (PPOP) tablets of a practically insoluble model drug were developed and the effect of various formulation and process parameters on tablet performance was evaluated in order to identify critical factors. The formulation factors such as the viscosity grade of polyethylene oxide as the primary polymer as well as the level and location of osmogen within the bilayer tablets led to a difference in performance of osmotic tablets and hence should be critically evaluated in the design of such dosage forms. Modification of granulation process, i.e., the granulating liquid composition or drying method of granules, did not impact the drug release from the osmotic tablets at the evaluated scale of this study. The influence of varying dose and aqueous solubility of other model drugs (i.e., theophylline, acetaminophen, and verapamil HCl) on the developed PPOP template was also investigated. Results showed that irrespective of the perceived complexity of development and manufacturing of osmotic pumps, the osmotic tablets in this study demonstrated a robust and yet flexible platform in accommodating different types of drug candidates, regardless of solubility, for the dose levels below 25% w/w of the pull layer formulation.

Robustness of barrier membrane coated metoprolol tartrate matrix tablets: Drug release evaluation under physiologically relevant in vitro conditions

&NA; Robust in vitro drug release behavior is an important feature of extended release (ER) hydrophilic matrix formulations for accurate prediction of in vivo drug release. In this study, ER hydrophilic matrix tablets of metoprolol tartrate were formulated using a high viscosity grade of hypromellose as a rate‐limiting polymer. Expectedly, this formulation showed an undesirable initial burst release followed by controlled drug release. Application of a barrier membrane (BM) coating of ethylcellulose with a pore former (hypromellose) resulted in the elimination of the burst effect. The aim of this study was to investigate the robustness of in vitro metoprolol release from BM‐coated hydrophilic matrix tablets by simulating the physicochemical properties of gastrointestinal fluids and mechanical stress in the fasted‐ and fed state human gastrointestinal (GI) tract. Uncoated and BM‐coated matrices were subjected to various dissolution studies simulating the varying pH conditions and additional physicochemical parameters, and the mechanical stress that can be caused by GI motility during both fasted and fed state GI passage. The BM‐coated formulation showed robust drug release without an initial burst in all test scenarios. BM‐coated matrix formulations thus represent a very promising approach for obtaining a highly controlled and robust drug release from oral ER formulations. Graphical abstract Figure. No caption available.