Shahzada Ahmad

Perovskite as Light Harvester: A Game Changer in Photovoltaics

It is not often that the scientific community is blessed with a material, which brings enormous hopes and receives special attention. When it does, it expands at a rapid pace and its every dimension creates curiosity. One such material is perovskite, which has triggered the development of new device architectures in energy conversion. Perovskites are of great interest in photovoltaic devices due to their panchromatic light absorption and ambipolar behavior. Power conversion efficiencies have been doubled in less than a year and over 15% is being now measured in labs. Every digit increment in efficiency is being celebrated widely in the scientific community and is being discussed in industry. Here we provide a summary on the use of perovskite for inexpensive solar cells fabrication. It will not be unrealistic to speculate that one day perovskite-based solar cells can match the capability and capacity of existing technologies.

A cobalt complex redox shuttle for dye-sensitized solar cells with high open-circuit potentials

Dye-sensitized solar cells are a promising alternative to traditional inorganic semiconductor-based solar cells. Here we report an open-circuit voltage of over 1,000 mV in mesoscopic dye-sensitized solar cells incorporating a molecularly engineered cobalt complex as redox mediator. Cobalt complexes have negligible absorption in the visible region of the solar spectrum, and their redox properties can be tuned in a controlled fashion by selecting suitable donor/acceptor substituents on the ligand. This approach offers an attractive alternate to the traditional I3−/I− redox shuttle used in dye-sensitized solar cells. A cobalt complex using tridendate ligands [Co(bpy-pz)2]3+/2+(PF6)3/2 as redox mediator in combination with a cyclopentadithiophene-bridged donor-acceptor dye (Y123), adsorbed on TiO2, yielded a power conversion efficiency of over 10% at 100 mW cm−2. This result indicates that the molecularly engineered cobalt redox shuttle is a legitimate alternative to the commonly used I3−/I− redox shuttle.

Metal free sensitizer and catalyst for dye sensitized solar cells

The carbon neutral process for energy conversion is of utmost importance, in this context photovoltaics, especially dye sensitized solar cells (DSSCs) are a viable alternative. Few terawatts of carbon free renewable energy can be produced by DSSCs. However the judicious use of platinum group free metals may further enhance the limit of energy production by making it further cost effective. In this context a metal free sensitizer and electrocatalyst related to DSSCs are reviewed for their merits. The current state-of-the-art sensitizer as well as carbon based materials for its chemistry and photovoltaic characterization are discussed. The present article combines recent progress and its emerging behavior from our laboratories and from other groups working on this perennial topic.

Hole‐Transport Materials for Perovskite Solar Cells

The pressure to move towards renewable energy has inspired researchers to look for ideas in photovoltaics that may lead to a major breakthrough. Recently the use of perovskites as a light harvester has lead to stunning progress. The power conversion efficiency of perovskite solar cells is now approaching parity (>22 %) with that of the established technology which took decades to reach this level of performance. The use of a hole transport material (HTM) remains indispensable in perovskite solar cells. Perovskites can conduct holes, but they are present at low levels, and for efficient charge extraction a HTM layer is a prerequisite. Herein we provide an overview of the diverse types of HTM available, from organic to inorganic, in the hope of encouraging further research and the optimization of these materials.

Dye-sensitized solar cells based on poly (3,4-ethylenedioxythiophene) counter electrode derived from ionic liquids

Poly (3,4-ethylenedioxythiophene) (PEDOT) nanoporous layers were prepared with electro-oxidative polymerization using room temperature hydrophobic ionic liquids as a medium. The synthesized highly porous PEDOT films exhibit room temperature conductivity value of 195 S cm−1 along with reproducible high cycling life. These films were used as counter electrodes in dye-sensitized solar cells yielding ∼8% power conversion efficiency, which is close to the classical platinum coated counter electrode (8.7%). The photovoltaic performance increases as we lower the PEDOT film thickness as the thin films has reasonably high catalytic properties.

Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell

Perovskite-sensitized solar cells have reached power conversion efficiencies comparable to commercially available solar cells used for example in solar farms. In contrast to silicon solar cells, perovskite-sensitized solar cells can be made by solution processes from inexpensive materials. The power conversion efficiency of these cells depends substantially on the charge transfer at interfaces. Here we use Kelvin probe force microscopy to study the real-space cross-sectional distribution of the internal potential within high efficiency mesoscopic methylammonium lead tri-iodide solar cells. We show that the electric field is homogeneous through these devices, similar to that of a p-i-n type junction. On illumination under short-circuit conditions, holes accumulate in front of the hole-transport layer as a consequence of unbalanced charge transport in the device. After light illumination, we find that trapped charges remain inside the active device layers. Removing these traps and the unbalanced charge injection could enable further improvements in performance of perovskite-sensitized solar cells.

Investigation Regarding the Role of Chloride in Organic–Inorganic Halide Perovskites Obtained from Chloride Containing Precursors

As the photovoltaic performance of a device is strongly influenced by the morphology of perovskite, achieving precise control over the crystal formation of organic-inorganic halide perovskites synthesized in the ambience of chloride ions has garnered much attention. Although the resulting morphology dictates the performance of the device considerably, the understanding of the role of chloride ions has been scant. To unravel this mystery, we investigated three different organic-inorganic halide perovskite materials grown from the chloride-containing precursors under different but optimized conditions. Despite the presence of chloride ions in the reaction mixture, scanning transmission electron microscopy- energy dispersive spectroscopy (STEM-EDS) reveals that the CH3NH3PbI3 perovskites formed are chloride-free. Moreover bright field transmission electron microscopy indicates that chloride ions effect the growth of the CH3NH3PbI3.

A Methoxydiphenylamine‐Substituted Carbazole Twin Derivative: An Efficient Hole‐Transporting Material for Perovskite Solar Cells

The small-molecule-based hole-transporting material methoxydiphenylamine-substituted carbazole was synthesized and incorporated into a CH3NH3PbI3 perovskite solar cell, which displayed a power conversion efficiency of 16.91%, the second highest conversion efficiency after that of Spiro-OMeTAD. The investigated hole-transporting material was synthesized in two steps from commercially available and relatively inexpensive starting reagents. Various electro-optical measurements (UV/Vis, IV, thin-film conductivity, hole mobility, DSC, TGA, ionization potential) have been carried out to characterize the new hole-transporting material.

A dopant free linear acene derivative as a hole transport material for perovskite pigmented solar cells

A solution processable, molecular organic semiconductor, 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene), was employed as hole transport material (HTM) in mesoscopic methylammonium lead iodide perovskite solar cells. TIPS-pentacene is potentially cost effective, exhibits a relatively high hole mobility and has a favourable HOMO level with respect to the valence band of perovskite. The photovoltaic performance of perovskite solar cells with TIPS-pentacene as HTM in its pristine form and with a dopant/additive was investigated and compared with classical spiro-OMeTAD based devices. Through solvoneering (solvent engineering) and concentration optimization TIPS-pentacene in its pristine form gave a very competitive power conversion efficiency (PCE) of 11.8% under 1 sun conditions. The open circuit voltage of 0.92 V and a short circuit current density of 20.86 mA cm−2 for the devices with pristine TIPS-pentacene were higher compared to doped spiro-OMeTAD based devices under similar conditions, thus paving the use of TIPS-pentacene as an alternative to an expensive spiro-OMeTAD for large area integration in perovskite based solar cells.

Influence of the counter electrode on the photovoltaic performance of dye-sensitized solar cells using a disulfide/thiolate redox electrolyte

Strong scientific interests focus on the investigation of iodine-free redox couples for their application in dye-sensitized solar cells (DSCs). Recently, a disulfide/thiolate-based redox electrolyte has been proposed as a valuable alternative to the conventional I3−/I− system due to its transparent and non-corrosive nature. In the work presented herein, we systematically studied the influence of different counter electrode materials on the photovoltaic performance of DSCs employing this promising organic redox electrolyte. Our investigations focused on understanding the importance of electrocatalytic activity and surface area of the electroactive material on the counter electrode, comparing the conventional platinum to cobalt sulfide (CoS) and poly(3,4-ethylenedioxythiophene) (PEDOT). Electrochemical Impedance Spectroscopy has been used to study in detail the interfacial charge transfer reaction at the counter electrode. By using a high surface area PEDOT-based counter electrode, we finally achieved an unprecedented power conversion efficiency of 7.9% under simulated AM1.5G solar irradiation (100 mW cm−2) which, to the best of our knowledge, represents the highest efficiency that has so far been reported for an organic redox couple.