Shaikh M. Mobin

Biomimetic sensor for certain catecholamines employing copper(II) complex and silver nanoparticle modified glassy carbon paste electrode.

A dimeric Cu(II) complex [Cu(μ(2)-hep)(hep-H)](2)·2ClO(4) (1) containing bidentate (hep-H=2-(2-hydroxyethyl)pyridine) ligand was synthesized and characterized by single crystal X-ray diffraction studies. Each Cu-ion in 1 is in a distorted square pyramidal geometry. Further 1 along with silver nanoparticles (SNPs) have been used as modifier in the construction of a biomimetic sensor (1-SNP-GCPE) for determining certain catecholamines viz., dopamine (DA), levodopa (l-Dopa), epinephrine (EP) and norepinephrine (NE) using cyclic voltammetry, chronocoulometry, electrochemical impedance spectroscopy and adsorptive stripping square wave voltammetry (AdSSWV). Finally, the catalytic properties of the sensor were characterized by chronoamperometry. Employing AdSSWV, the calibration curves showed linear response ranging between 10(-6) and 10(-9)M for all the four analytes with detection limits (S/N=3) of 8.52×10(-10)M, 2.41×10(-9)M, 3.96×10(-10)M and 3.54×10(-10)M for DA, l-Dopa, EP and NE respectively. The lifetime of the biomimetic sensor was 3 months at room temperature. The prepared modified electrode shows several advantages such as simple preparation method, high sensitivity, high stability, ease of preparation and regeneration of the electrode surface by simple polishing along with excellent reproducibility. The method has been applied for the selective and precise analysis of DA, l-Dopa, EP and NE in pharmaceutical formulations, urine and blood serum samples.

Synthesis of Imidazopyridines from the Morita–Baylis–Hillman Acetates of Nitroalkenes and Convenient Access to Alpidem and Zolpidem

A variety of functionalized imidazo[1,2-a]pyridines have been synthesized through a one-pot, room temperature, and reagent-free reaction between MBH acetates of nitroalkenes and 2-aminopyridines. The reaction involves a cascade inter-intramolecular double aza-Michael addition of 2-aminopyridines to MBH acetates. Our methodology is marked by excellent yield, regioselectivity and, above all, adaptability to synthesize imidazopyridine-based drug molecules such as Alpidem and Zolpidem.

Biomimetic sensor for certain phenols employing a copper(II) complex.

A new dimeric Cu(II) complex [Cu(mu(2)-hep)(hep-H)](2).2PF(6) (1) containing a bidentate (hep-H = 2-(2-hydroxyethyl)pyridine) ligand was synthesized and characterized by single crystal X-ray diffraction studies. Each Cu ion in 1 is in a distorted square pyramidal geometry. Further 1 is used as a modifier in the construction of a biomimetic sensor for determining phenols [phenol (Phe), resorcinol (Res), hydroquinone (HQ), and catechol (Cat)] in phosphate buffer by using cyclic voltammetry (CV), chronocoulometry, electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and square wave voltammetry (SWV). DPV has been proposed for trace determination of Phe and Res while SWV for HQ and Cat. The method has been applied for the selective and precise analysis of Phe in commercial injections, Res in hair coloring agents, HQ in photographic developers and cosmetics, and Cat in tea samples and guarana tablets. The calibration curves showed a linear response ranging between 10(-6) and 10(-8) M for all four of the analytes with detection limits (3sigma) of 1.04 x 10(-8), 2.31 x 10(-8), 1.54 x 10(-8), and 0.86 x 10(-8) M for Phe, Res, HQ, and Cat, respectively. The lifetime of the biomimetic sensor was 200 days at room temperature (at least 750 determinations). The catalytic properties of 1-CPE were characterized by chronoamperometry and were found to be in good agreement with Michaelis-Menten kinetics.

Metallaboranes of the Early Transition Metals: Direct Synthesis and Characterization of [{(η5-C5Me5)Ta}2BnHm] (n=4, m=10; n=5, m=11), [{(η5-C5Me5)Ta}2B5H10(C6H4CH3)], and [{(η5-C5Me5)TaCl}2B5H11]

Reaction of [Cp*TaCl4] (Cp*=eta5-C5Me5) with a sixfold excess of LiBH(4)thf followed by BH3thf in toluene at 100 degrees C led to the isolation of hydrogen-rich metallaboranes [(Cp*Ta)2B4H10] (1), [(Cp*Ta)2B5H11] (2), [(Cp*Ta)2B5H10(C6H4CH3)] (3), and [(Cp*TaCl)2B5H11] (4) in modest yield. Compounds 1-3 are air- and moisture-sensitive but 4 is reasonably stable in air. Their structures are predicted by the electron-counting rules to be a bicapped tetrahedron (1), bicapped trigonal bipyramids (2, 3), and a nido structure based on a closo dodecahedron 4. Yellow tantalaborane 1 has a nido geometry with C2v symmetry and is isostructural with [(Cp*M)2B4H8] (M=Cr and Re); whereas 2 and 3 are C3v-symmetric and isostructural with [(Cp*M)2B5H9] (M=Cr, Mo, W) and [(Cp*ReH)2B5Cl5]. The most remarkable feature of 4 is the presence of a hydride ligand bridging the ditantalum center to form a symmetrical tantalaborane cluster with a long Ta--Ta bond (3.22 A). Cluster 4 is a rare example of electronically unsaturated metallaborane containing four TaHB bonds. All these new metallaboranes have been characterized by mass spectrometry, 1H, 11B, and 13C NMR spectroscopy, and elemental analysis, and the structural types were unequivocally established by crystallographic analysis of 1-4.

Synthesis and structural studies of novel Co(III) ternary complexes containing N(4)-substituted thiosemicarbazones of 2-hydroxyacetophenone and heterocyclic bases

Abstract An interesting series of eight neutral ternary Co(III) complexes of 2-hydroxyacetophenone N(4)-substituted thiosemicarbazones (H2L), bidentate heterocyclic bases 2,2′-bipyridine (bipy)/1,10-phenanthroline (phen) and azide with a general formula [MLB(N3)] were prepared. The complexes were characterized by means of spectroscopic methods. The coordination geometry around Co(III) in all the complexes is distorted octahedral with one dibasic tridentate ligand L2−, one bidentate heterocyclic base and one terminally coordinated azide group. Crystal structure of the compound CoL4bipyN3 was completely solved. All the electronic transitions were assigned. All complexes were diamagnetic indicating cobalt in a d6 strong field.

Fine Tuning of Metallaborane Geometries: Chemistry of Metallaboranes of Early Transition Metals Derived from Metal Halides and Monoborane Reagents

Reaction of [Cp(n)MCl(4-x)] (M=V: n=x=2; M=Nb: n=1, x=0) or [Cp*TaCl(4)] (Cp=eta(5)-C(5)H(5), Cp*=eta(5)-C(5)Me(5)), with [LiBH(4).thf] at -70 degrees C followed by thermolysis at 85 degrees C in the presence of [BH(3).thf] yielded the hydrogen-rich metallaboranes [(CpM)(2)(B(2)H(6))(2)] (1: M=V; 2: M=Nb) and [(Cp*Ta)(2)(B(2)H(6))(2)] (3) in modest to high yields. Complexes 1 and 3 are the first structurally characterized compounds with a metal-metal bond bridged by two hexahydroborate (B(2)H(6)) groups forming a symmetrical complex. Addition of [BH(3).thf] to 3 results in formation of a metallaborane [(Cp*Ta)(2)B(4)H(8)(mu-BH(4))] (4) containing a tetrahydroborate ligand, [BH(4)](-), bound exo to the bicapped tetrahedral cage [(Cp*Ta)(2)B(4)H(8)] by two Ta-H-B bridge bonds. The interesting structural feature of 4 is the coordination of the bridging tetrahydroborate group, which has two B-H bonds coordinated to the tantalum atoms. All these new metallaboranes have been characterized by mass, (1)H, (11)B, and (13)C NMR spectroscopy and elemental analysis and the structural types were established unequivocally by crystallographic analysis of 1-4.

Valence-State Alternatives in Diastereoisomeric Complexes [(acac)2Ru(μ-QL)Ru(acac)2]n (QL2− = 1,4-Dioxido-9,10-anthraquinone,n = +2, +1, 0, −1, −2)

The title complexes were obtained in neutral form (n = 0) as rac (1) and meso isomers (2). 2 was crystallized for X-ray diffraction and its temperature-dependent magnetism studied. It contains two antiferromagnetically coupled ruthenium(III) ions, bridged by the quinizarine dianion QL(2-) (quinizarine = 1,4-dihydroxy-9,10-anthraquinone). The potential of both the ligand (QLo --> QL4-) and the metal complex fragment combination [(acac)2RuII]2 --> ([(acac)2RuIV]2)4+ to exist in five different redox states creates a large variety of combinations, which was assessed for the electrochemically reversibly accessible 2+, 1+, 0, 1-, 2- forms using cyclic voltammetry as well as EPR and UV-vis-NIR spectroelectrochemistry. The results for the two isomers are similar: Oxidation to 1+ or 2+ causes the emergence of a near-infrared band (1390 nm), without revealing an EPR response even at 4 K. Reduction to 1- or 2- produces an EPR signal, signifying metal-centered spin but no near-infrared absorption. Tentatively, we assume metal-based oxidation of [(acac)2RuIII(mu-QL2-)RuIII(acac)2] to a mixed-valent intermediate [(acac)2RuIII(mu-QL2-)RuIV(acac)2]+ and ligand-centered reduction to a radical complex [(acac)2RuIII(mu-QL.3-)RuIII(acac)2 (-) with antiferromagnetic three-spin interaction.

Predictably Selective (sp3)C–O Bond Formation through Copper Catalyzed Dehydrogenative Coupling: Facile Synthesis of Dihydro-oxazinone Derivatives

An intramolecular dehydrogenative (sp(3))C-O bond formation in salicylamides can be initiated by an active Cu/O2 species to generate pharamaceutically relevant dihydro-oxazinones. Experimental findings suggest that stereoelectronic parameters in both coupling partners are controlling factors for site selectivity in bond formation. Mechanistic investigations including isotope labeling, kinetic studies helped to propose a catalytic cycle. The method provides a convenient synthesis of an investigational new medicine CX-614, which has potential in finding treatment for Parkinsons and Alzheimers diseases.

Ferrocenyl BODIPYs: synthesis, structure and properties

A set of donor–π-acceptor–π-donor type ferrocenyl substituted BODIPYs were designed and synthesized by the Sonogashira coupling reaction. These compounds exhibit red shifted absorption and poor fluorescence. The electrochemical properties of these compounds exhibit strong donor–acceptor interactions. The crystal structure of 3b exhibits an extensive hydrogen bonded 2-D network.

Synthesis and structural characterization of new divanada- and diniobaboranes containing chalcogen atoms.

The reaction of [Cp(n)MCl(4-x)] (M=V: n=2, x=2; M=Nb: n=1, x=0; Cp=η(5)-C(5) H(5)) with LiBH(4)⋅THF followed by thermolysis in the presence of dichalcogenide ligands E(2)R(2) (E=S, Te; R=2,6-(tBu)(2)-C(6)H(2)OH, Ph) and 2-mercaptobenzothiazole (C(7)H(5)NS(2)) yielded dimetallaheteroboranes [{CpV(μ-TePh)}(2)(μ(3) -Te)BH⋅thf] (1), [(CpV)(2)(BH(3)S)(2)] (2), [(CpNb)(2)B(4)H(10)S] (3), [(CpNb)(2)B(4)H(11)S(tBu)(2)C(6)H(2)OH] (4), and [(CpNb)(2)B(4)H(11)TePh] (5). In cluster 1, the V(2)BTe atoms define a tetrahedral framework in which the boron atom is linked to a THF molecule. Compound 2 can be described as a dimetallathiaborane that is built from two edge-fused V(2)BS tetrahedron clusters. Cluster 3 can be considered as an edge-fused cluster in which a trigonal-bipyramidal unit (Nb(2)B(2)S) has been fused with a tetrahedral core (Nb(2)B(2)) by means of a common Nb(2) edge. In addition, thermolysis of an in-situ-generated intermediate that was produced from the reaction of [Cp(2)VCl(2)] and LiBH(4)⋅THF with excess BH(3)⋅THF yielded oxavanadaborane [(CpV)(2)B(3)H(8)(μ(3)-OEt)] (6) and divanadaborane cluster [(CpV)(2)B(5)H(11)] (7). Cluster 7 exhibits a nido geometry with C(2v) symmetry and it is isostructural with [(Cp*M)(2)B(5)H(9+n)] (M=Cr, Mo, and W, n=0; M=Ta, n=2; Cp*=η(5)-C(5)Me(5)). All of these new compounds have been characterized by (1)H NMR, (11)B NMR, and (13)C NMR spectroscopy and elemental analysis and the structural types were established unequivocally by crystallographic analysis of compounds 1-4, 6, and 7.