Shantilal Oswal

VISCOSITY AND EXCESS MOLAR VOLUME OF BINARY MIXTURES OF METHANOL AND ETHANOL WITH TRIETHYLAMINE AND TRI-N-BUTYLAMINE AT 303.15, 313.15, and 323.15 K: CHARACTERIZATION IN TERMS OF ERAS MODEL

The excess molar volume VE, viscosity deviation Δη, and excess Gibbs energy of activation ΔG*E of viscous flow have been investigated from the density ρ and viscosity η measurements of four binary mixtures of methanol and ethanol with triethylamine and tri-n-butylamine over the entire range of mole fractions at 303.15, 313.15, and 323.15 K. The viscosity data have been correlated with the equations of Grunberg and Nissan, Hind, McLaughlin, and Ubbelohde, Tamura and Kurata, and McAllister. The systems studied exhibit very strong cross association through strong O–H…N bonding between –OH and –N < groups. As a consequence of this strong intermolecular association, all four systems have very large negative VE. The VE of the studied mixtures is consistently described by the ERAS model. The values of cross association constants KAB illustrate the fact that cross-associates are more pronounced in a mixture of a short-chain tertiary amine.

Copolymerization of Methyl Methacrylate, Ethyl Acrylate, and Butyl Acrylate with N-2-Anisylmaleimide and Characterization of the Copolymers

The free radical copolymerizations of methyl methacrylate (MMA), ethyl acrylate (EA), and butyl acrylate (BA) with N-2-Anisylmaleimide (AMI), initiated by AIBN, were performed in THF solvent at 65°C. A series of copolymers of AMI-MMA, AMI-EA, and AMI-BA were prepared using different feed ratios of comonomers. The polymer samples have been characterized by solubility tests, intrinsic viscosity measurements, FT-IR, and 1H-NMR spectral analysis, and thermo-gravimetric analysis. The values of monomer reactivity ratios r1 and r2 determined by Fineman-Ross and Kelen-Tudos methods are 0.43 and 0.42 in AMI/MMA, 0.72 and 0.62 in AMI/EA and 0.76 and 0.72 in AMI/BA systems. Alfrey-Price Q-e values for AMI are Q = 3.13 and e = 1.71 in AMI/MMA, Q = 1.10 and e = 1.46 in AMI/EA and Q = 1.02 and e = 1.63 in AMI/BA systems. It was found that the initial and final decomposition temperature increased with increasing the component of AMI in the copolymer.

Free Radical Copolymerization of Methyl Methacrylate and Styrene with N-(4-Carboxyphenyl)maleimide

The free radical copolymerization of methyl methacrylate (MMA) or styrene (St) with N-(4-carboxyphenyl)maleimide (CPMI) was carried with AIBN as an initiator in THF solvent at 80°C. A series of copolymers of MMA and St with CPMI were prepared using different feed ratios of comonomers. The values of monomer reactivity ratios (r1, r2) determined by Fineman-Ross and Kelen-Tudos methods are 0.26 and 2.51 in the CPMI/MMA system and 0.08 and 0.22 in the CPMI/St system. Alfrey–Price Q-e values for CPMI were calculated as Q = 1.05 and e = 0.41 in the CPMI/MMA system and Q = 1.21 and e = 0.91 in the CPMI/St system. The polymer samples have been characterized by solubility tests, intrinsic viscosity measurements, FT-IR and 1H-NMR spectral analysis, and thermo-gravimetric analysis. It was found that the initial and final decomposition temperatures increased with increasing the amount of CPMI in the copolymer. The integral procedural decomposition temperature and energy of activation of thermal degradation have also been reported.

Interfacial Polymerization of Linear Aromatic Poly(ester amide)s

Linear aromatic poly(ester amide)s (PEAs) have been synthesized by interfacial polycondensation (IPC) of aromatic diamidoacid chloride: 2-{[4-({[2-(chlorocarbonyl) phenyl]amino} carbonyl) benzoyl]amino} benzoyl chloride (2CCBC), with ethylene glycol, bisphenol A, resorcinol, 4,4′-bis(4-hydroxybenzilidine)diaminobenzanilide and 4,4′-bis(4-hydroxy benzilidine)-m-phenylenediamine in chloroform/water system employing phase-transfer-catalyst. The aromatic diamidoacid chloride has been prepared by condensation of terephthaloyl chloride with anthranilic acid. These polymers were characterized by elemental analysis, FTIR, 1H-NMR, solubility studies, intrinsic viscosity and TGA analysis. The polyester-amides so obtained show good thermal stability.

Synthesis and Radical Copolymerization of Ethyl Acrylate and Butyl Acrylate with N-[4-N'-(Phenylamino-carbonyl) phenyl] maleimide

Radical copolymerization of ethyl acrylate (EA) and butyl acrylate (BA) with 4-maleimidobenzanilide (MB), that is N-[4-N′-(phenylaminocarbonyl)phenyl]maleimide, initiated by AIBN was performed in THF solvent at 65°C. Nine copolymer samples of each type were prepared using different feed ratios of comonomers. All the polymer samples have been characterized by solubility test, intrinsic viscosity measurements, FT-IR and 1H-NMR spectral analysis, and thermo-gravimetric analysis. The values of monomer reactivity ratios r1 and r2 are 1.13 and 0.48 in MB/EA system and 0.45 and 0.52 MB/BA system. Alfrey-Price Q-e values for MB were Q = 1.31 and e = 1.33 in MB/EA and Q = 2.04 and e = 2.06 in MB/BA systems. The initial decomposition temperature of copolymer samples were in the range 310 to 365°C.

Synthesis and Characterization of Homo- and Copolymers of N-4-Azodiphenyl Maleimide with Methyl Methacrylate and Styrene

The synthesis and free radical homopolymerization of N-4-azodiphenylmaleimide (ADPMI) and copolymerization of methyl methacrylate (MMA) and styrene (ST) with ADPMI using an AIBN initiator were performed in THF solvent at 70°C. A series of copolymers, ADPMI-MMA and ADPMI-ST, were prepared using different feed ratios of comonomers. The polymer samples have been characterized by solubility tests, intrinsic viscosity measurements, FT-IR, 1H-NMR spectral analysis, and thermo-gravimetric analysis. The values of monomer reactivity ratios r1 and r2 determined by Fineman-Ross and Kelen-Tudos methods are 0.16 and 0.63, and 0.26 and 0.25 in ADPMI/MMA and ADPMI/ST systems, respectively. Alfrey-Price Q-e values for ADPMI are Q = 2.27 and e = 1.92, and 0.41 and 1.949 for ADPMI/MMA and ADPMI/ST systems, respectively. It was found that the initial and final decomposition temperatures increased with the increase of ADPMI content in the copolymer samples.