Sheng-Feng Lai

Gold nanoparticles as high-resolution X-ray imaging contrast agents for the analysis of tumor-related micro-vasculature

BackgroundAngiogenesis is widely investigated in conjunction with cancer development, in particular because of the possibility of early stage detection and of new therapeutic strategies. However, such studies are negatively affected by the limitations of imaging techniques in the detection of microscopic blood vessels (diameter 3-5 μm) grown under angiogenic stress. We report that synchrotron-based X-ray imaging techniques with very high spatial resolution can overcome this obstacle, provided that suitable contrast agents are used.ResultsWe tested different contrast agents based on gold nanoparticles (AuNPs) for the detection of cancer-related angiogenesis by synchrotron microradiology, microtomography and high resolution X-ray microscopy. Among them only bare-AuNPs in conjunction with heparin injection provided sufficient contrast to allow in vivo detection of small capillary species (the smallest measured lumen diameters were 3-5 μm). The detected vessel density was 3-7 times higher than with other nanoparticles. We also found that bare-AuNPs with heparin allows detecting symptoms of local extravascular nanoparticle diffusion in tumor areas where capillary leakage appeared.ConclusionsAlthough high-Z AuNPs are natural candidates as radiology contrast agents, their success is not guaranteed, in particular when targeting very small blood vessels in tumor-related angiography. We found that AuNPs injected with heparin produced the contrast level needed to reveal--for the first time by X-ray imaging--tumor microvessels with 3-5 μm diameter as well as extravascular diffusion due to basal membrane defenestration. These results open the interesting possibility of functional imaging of the tumor microvasculature, of its development and organization, as well as of the effects of anti-angiogenic drugs.

Quantitative analysis of nanoparticle internalization in mammalian cells by high resolution X-ray microscopy

BackgroundQuantitative analysis of nanoparticle uptake at the cellular level is critical to nanomedicine procedures. In particular, it is required for a realistic evaluation of their effects. Unfortunately, quantitative measurements of nanoparticle uptake still pose a formidable technical challenge. We present here a method to tackle this problem and analyze the number of metal nanoparticles present in different types of cells. The method relies on high-lateral-resolution (better than 30 nm) transmission x-ray microimages with both absorption contrast and phase contrast -- including two-dimensional (2D) projection images and three-dimensional (3D) tomographic reconstructions that directly show the nanoparticles.ResultsPractical tests were successfully conducted on bare and polyethylene glycol (PEG) coated gold nanoparticles obtained by x-ray irradiation. Using two different cell lines, EMT and HeLa, we obtained the number of nanoparticle clusters uptaken by each cell and the cluster size. Furthermore, the analysis revealed interesting differences between 2D and 3D cultured cells as well as between 2D and 3D data for the same 3D specimen.ConclusionsWe demonstrated the feasibility and effectiveness of our method, proving that it is accurate enough to measure the nanoparticle uptake differences between cells as well as the sizes of the formed nanoparticle clusters. The differences between 2D and 3D cultures and 2D and 3D images stress the importance of the 3D analysis which is made possible by our approach.

The Properties and Preparation of Chitosan/Silica Hybrids Using Sol-Gel Process

Chitosan/silica hybrids (Chitosan/SiO2) using a sol-gel process were prepared at a wide range of in situ silica content from 0% to 100%. This work was undertaken to investigate the thermal properties, optical, adsorption, and biodegradability properties of this type of hybrid. Fourier transform infrared (FTIR) spectra were recorded to depict the interfacial interaction. Thermogravimetric analysis was used to determine the actual silica content forming in the hybrids and to evaluate the enhanced heat resistance of hybrids resulting from silica. Crystallography was illustrated using an X-ray diffractometer. Fracture surface was revealed through a scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) to probe the dispersion degree of SiO2, which in turn confirmed the results of optical property on the formation of nanocomposites. To prevent the dissolution of chitosan and silica in the acid and alkaline solution, respectively, all prepared hybrids are capable of chelating Cu (II) as well as Fe (III) in a large degree. In addition, the hybrids are biodegradable based on the lysozyme treatment. Thus, chitosan/silica hybrids are of benefit as suitable environmental biomaterials and adsorbents under a wide range of conditions.

Enhancement of irradiation effects on cancer cells by cross-linked dextran-coated iron oxide (CLIO) nanoparticles

We investigated iron oxide nanoparticles with two different surface modifications, dextran coating and cross-linked dextran coating, showing that their different internalization affects their capability to enhance radiation damage to cancer cells. The internalization was monitored with an ultrahigh resolution transmission x-ray microscope (TXM), indicating that the differences in the particle surface charge play an essential role and dominate the particle-cell interaction. We found that dextran-coated iron oxide nanoparticles cannot be internalized by HeLa and EMT-6 cells without being functionalized with amino groups (the cross-linked dextran coating) that modify the surface potential from -18 mV to 13.4 mV. The amount of cross-linked dextran-coated iron oxide nanoparticles uptaken by cancer cells reached its maximum, 1.33 x 10(9) per HeLa cell, when the co-culture concentration was 40 microg Fe mL(-1) or more. Standard tests indicated that these internalized nanoparticles increased the damaging effects of x-ray irradiation, whereas they are by themselves biocompatible. These results could lead to interesting therapy applications; furthermore, iron oxide also produces high contrast for magnetic resonance imaging (MRI) in the diagnosis and therapy stages.

One-pot synthesis of AuPt alloyed nanoparticles by intense x-ray irradiation

We synthesized AuPt alloyed nanoparticles in colloidal solution by a one-pot procedure based on synchrotron x-ray irradiation in the presence of PEG (polyethylene glycol). The exclusive presence of alloyed nanoparticles with fcc structure was confirmed by several different experiments including UV-vis spectroscopy, x-ray diffraction (XRD) and transmission electron microscopy (TEM). The composition of the AuPt alloyed nanoparticles can be varied in a continuous fashion by simply varying the feed ratios of Au and Pt precursors. The nanoparticles exhibited colloidal stability and biocompatibility, important for potential applications.

Imaging the cellular uptake of tiopronin-modified gold nanoparticles

AbstractWell-dispersed gold nanoparticles (NP) coated with tiopronin were synthesized by X-ray irradiation without reducing agents. High-resolution transmission electron microscopy shows that the average core diameters of the NPs can be systematically controlled by adjusting the tiopronin to Au mole ratio in the reaction. Three methods were used to study the NP uptake by cells: quantitative measurements by inductively coupled plasma mass spectrometry, direct imaging with high lateral resolution transmission electron microscopy and transmission X-ray microscopy. The results confirmed that the NP internalization mostly occurred via endocytosis and concerned the cytoplasm. The particles, in spite of their small sizes, were not found to arrive inside the cell nuclei. The synthesis without reducing agents and solvents increased the biocompatibility as required for potential applications in analysis and biomedicine in general. FigureA high resolution Transmission X-ray microscope image (A) captured the internalization and aggregation of tiopronin-coated Au nanoparticles in the vicinity of cell nucleus, the light dark area, of an EMG-6 cell. (B) One of the corresponding pictures produced by three-dimensional tomography reconstruction. The complete movie sequence of such pictures provides three-dimensional visual confirmation of the internalization and location of tiopronin-coated Au nanoparticles.

Tailored Au nanorods: optimizing functionality, controlling the aspect ratio and increasing biocompatibility

Monodisperse gold nanorods with high aspect ratio were synthesized by x-ray irradiation. Irradiation was first used to stimulate the creation of seeds. Afterward, nanorod growth was stimulated either by chemical reduction or again by x-ray irradiation. In the last case, the entire process took place without reducing agents. The shape of the final products could be controlled by modulating the intensity of the x-ray irradiation during the seed synthesis. In turn, the nanorod aspect ratio determines the absorption wavelength of the nanorods that can thus be optimized for different applications. Likewise, the aspect ratio influences the uptake of the nanorods by HeLa cells.

One-Pot Tuning of Au Nucleation and Growth: From Nanoclusters to Nanoparticles

We describe a simple and effective method to obtain colloidal surface-functionalized Au nanoparticles. The method is primarily based on irradiation of a gold solution with high-flux X-rays from a synchrotron source in the presence of 11-mercaptoundecanoic acid (MUA). Extensive tests of the products demonstrated high colloidal density as well as excellent stability, shelf life, and biocompatibility. Specific tests with X-ray diffraction, UV-visible spectrometry, visible microscopy, Fourier transform infrared spectroscopy, dark-field visible-light scattering microscopy, and transmission electron microscopy demonstrated that MUA, being an effective surfactant, not only allows tunable size control of the nanoparticles, but also facilitates functionalization. The nanoparticle sizes were 6.45 ± 1.58, 1.83 ± 1.21, 1.52 ± 0.37 and 1.18 ± 0.26 nm with no MUA and with MUA-to-Au ratios of 1:2, 1:1, and 3:1. The MUA additionally enabled functionalization with l-glycine. We thus demonstrated flexibility in controlling the nanoparticle size over a large range with narrow size distribution.

Very small photoluminescent gold nanoparticles for multimodality biomedical imaging

An original synthesis method based on X-ray irradiation produced gold nanoparticles (AuNPs) with two important properties for biomedical research: intense visible photoluminescence and very high accumulation in cancer cells. The nanoparticles, coated with MUA (11-mercaptoundecanoid acid), are very small (1.4 nm diameter); the above two properties are not present for even slightly larger sizes. The small MUA-AuNPs are non-cytotoxic (except for very high concentrations) and do not interfere with cancer cell proliferation. Multimodality imaging using visible light fluorescence and X-ray microscopy is demonstrated by tracing the nanoparticle-loaded tumor cells.

X-ray imaging of tumor growth in live mice by detecting gold-nanoparticle-loaded cells

We show that sufficient concentrations of gold nanoparticles produced by an original synthesis method in EMT-6 and CT-26 cancer cells make it possible to detect the presence, necrosis and proliferation of such cells after inoculation in live mice. We first demonstrated that the nanoparticles do not interfere with the proliferation process. Then, we observed significant differences in the tumor evolution and the angiogenesis process after shallow and deep inoculation. A direct comparison with pathology optical images illustrates the effectiveness of this approach.