Shengjie Ling

Synchrotron FTIR Microspectroscopy of Single Natural Silk Fibers

Synchrotron FTIR (S-FTIR) microspectroscopy was used to monitor the silk protein conformation in a range of single natural silk fibers (domestic and wild silkworm and spider dragline silk). With the selection of suitable aperture size, we obtained high-resolution S-FTIR spectra capable of semiquantitative analysis of protein secondary structures. For the first time, we have determined from S-FTIR the β-sheet content in a range of natural single silk fibers, 28 ± 4, 23 ± 2, and 17 ± 4% in Bombyx mori, Antheraea pernyi, and Nephila edulis silks, respectively. The trend of β-sheet content in different silk fibers from the current study accords quite well with published data determined by XRD, Raman, and (13)C NMR. Our results indicate that the S-FTIR microspectroscopy method has considerable potential for the study of single natural silk fibers.

Modulating Materials by Orthogonally Oriented β-Strands: Composites of Amyloid and Silk Fibroin Fibrils

Amyloid fibrils and silk fibroin (SF) fibrils are proteinaceous aggregates occurring either naturally or as artificially reconstituted fibrous systems, in which the constituent β-strands are aligned either orthogonally or parallel to the fibril main axis, conferring complementary physical properties. Here, it is shown how the combination of these two classes of protein fibrils with orthogonally oriented β-strands results in composite materials with controllable physical properties at the molecular, mesoscopic, and continuum length scales.

Insight into the structure of single Antheraea pernyi silkworm fibers using synchrotron FTIR microspectroscopy.

Synchrotron FTIR (S-FTIR) microspectroscopy was used to monitor both protein secondary structures (conformations) and their orientations in single cocoon silk fibers of the Chinese Tussah silk moth ( Antheraea pernyi ). In addition, to understand further the relationship between structure and properties of single silk fibers, we studied the changes of orientation and content of different secondary structures in single A. pernyi silk fibers when subjected to different strains. The results showed that the content and orientation of β-sheet was almost unchanged for strains from 0 to 0.3. However, the orientation of α-helix and random coil improved progressively with increasing strain, with a parallel decrease in α-helix content and an increase in random coil. This clearly indicates that most of the deformation upon stretching of the single fiber is due to the change of orientation in the amorphous regions coupled with a conversion of some of the α-helix to random coil. These observations provide an explanation for the supercontraction behavior of certain animal silks and are likely to facilitate understanding and optimization of postdrawing used in the conjunction with the wet-spinning of silk fibers from regenerated silk solutions. Thus, our work demonstrates the power of S-FTIR microspectroscopy for studying biopolymers.

Ultrathin Free-Standing Bombyx mori Silk Nanofibril Membranes

We report a new ultrathin filtration membrane prepared from silk nanofibrils (SNFs), directly exfoliated from natural Bombyx mori silk fibers to retain structure and physical properties. These membranes can be prepared with a thickness down to 40 nm with a narrow distribution of pore sizes ranging from 8 to 12 nm. Typically, 40 nm thick membranes prepared from SNFs have pure water fluxes of 13 000 L h(-1) m(-2) bar(-1), more than 1000 times higher than most commercial ultrathin filtration membranes and comparable with the highest water flux reported previously. The commercial membranes are commonly prepared from polysulfone, poly(ether sulfone), and polyamide. The SNF-based ultrathin membranes exhibit efficient separation for dyes, proteins, and colloids of nanoparticles with at least a 64% rejection of Rhodamine B. This broad-spectrum filtration membrane would have potential utility in applications such as wastewater treatment, nanotechnology, food industry, and life sciences in part due to the protein-based membrane polymer (silk), combined with the robust mechanical and separation performance features.

Liquid Exfoliated Natural Silk Nanofibrils: Applications in Optical and Electrical Devices

A method to directly extract silk nanofibrils from native silk fibers at the single nanofibrils scale is reported. The resulting silk nanofibrils, which retain structural features and physical properties of native silk fibers, show potential utility in optical and electronic devices.

Design and function of biomimetic multilayer water purification membranes

A nacre-like multilayer filtration membrane is developed by integration of computational simulation and experimental fabrication. Multilayer architectures in water purification membranes enable increased water throughput, high filter efficiency, and high molecular loading capacity. However, the preparation of membranes with well-organized multilayer structures, starting from the nanoscale to maximize filtration efficiency, remains a challenge. We report a complete strategy to fully realize a novel biomaterial-based multilayer nanoporous membrane via the integration of computational simulation and experimental fabrication. Our comparative computational simulations, based on coarse-grained models of protein nanofibrils and mineral plates, reveal that the multilayer structure can only form with weak interactions between nanofibrils and mineral plates. We demonstrate experimentally that silk nanofibril (SNF) and hydroxyapatite (HAP) can be used to fabricate highly ordered multilayer membranes with nanoporous features by combining protein self-assembly and in situ biomineralization. The production is optimized to be a simple and highly repeatable process that does not require sophisticated equipment and is suitable for scaled production of low-cost water purification membranes. These membranes not only show ultrafast water penetration but also exhibit broad utility and high efficiency of removal and even reuse (in some cases) of contaminants, including heavy metal ions, dyes, proteins, and other nanoparticles in water. Our biomimetic design and synthesis of these functional SNF/HAP materials have established a paradigm that could lead to the large-scale, low-cost production of multilayer materials with broad spectrum and efficiency for water purification, with applications in wastewater treatment, biomedicine, food industry, and the life sciences.

Conformation transition of Bombyx mori silk protein monitored by time-dependent fourier transform infrared (FT-IR) spectroscopy: effect of organic solvent.

The conformation transition from random coil and/or helix to β-sheet of silk protein is the most important step in the formation of silk fiber in nature as well as by artificial spinning. Time-dependent Fourier transform infrared (FT-IR) spectroscopy was used in this research to monitor such a conformation transition process induced by the organic solvents methanol, ethanol, propanol, isopropanol, and acetone. The kinetics of β-sheet formation of regenerated Bombyx mori silk fibroin in these organic solvents was obtained by the Δabsorbance–time curve from the time-dependent difference infrared spectra. The results showed that the conformation transition rate of silk fibroin was methanol > ethanol > acetone > propanol > isopropanol, which is in accordance with the polarity of these organic solvents. In connection with the mechanical properties and morphologies of regenerated silk fibers using these organic solvents as coagulation bath reported in the literature, we may conclude that the conformation transition rate of silk protein in the organic solvent is very important in wet-spinning to produce high-performance regenerated silk fibers.

FTIR imaging, a useful method for studying the compatibility of silk fibroin-based polymer blends

As in other polymer blends, the phase behavior of silk fibroin (SF) blends with other polymers is thought to be important for their related properties. Here we used FTIR imaging to study the phase behavior of three silk protein-based polymer blends, silk fibroin/chitosan (SF/CS) blend, silk fibroin/sodium alginate (SF/SA) blend, and silk fibroin/polyvinyl alcohol (SF/PVA) blend. FTIR images of the films prepared from these polymer blends indicated that the SF/CS blend was compatible, the SF/SA blend was partially compatible, and the SF/PVA blend was incompatible. The results accord with the conclusions from the conventional analysis methods like SEM, DSC, and DTMA reported in the literature. Moreover, we show that FTIR images of the blends can provide additional useful information on the composition of the individual components, and the conformation of SF at defined locations with a spatial resolution of 4 μm. Therefore, we believe FTIR imaging is a useful technique to better understand both the chemical and physical properties of silk protein-based polymer blends, and other kinds of polymer blends.

Regenerated silk materials for functionalized silk orthopedic devices by mimicking natural processing

Silk fibers spun by silkworms and spiders exhibit exceptional mechanical properties with a unique combination of strength, extensibility and toughness. In contrast, the mechanical properties of regenerated silk materials can be tuned through control of the fabrication process. Here we introduce a biomimetic, all-aqueous process, to obtain bulk regenerated silk-based materials for the fabrication of functionalized orthopedic devices. The silk materials generated in the process replicate the nano-scale structure of natural silk fibers and possess excellent mechanical properties. The biomimetic materials demonstrate excellent machinability, providing a path towards the fabrication of a new family of resorbable orthopedic devices where organic solvents are avoided, thus allowing functionalization with bioactive molecules to promote bone remodeling and integration.

Polymorphic regenerated silk fibers assembled through bioinspired spinning

A variety of artificial spinning methods have been applied to produce regenerated silk fibers; however, how to spin regenerated silk fibers that retain the advantages of natural silks in terms of structural hierarchy and mechanical properties remains challenging. Here, we show a bioinspired approach to spin regenerated silk fibers. First, we develop a nematic silk microfibril solution, highly viscous and stable, by partially dissolving silk fibers into microfibrils. This solution maintains the hierarchical structures in natural silks and serves as spinning dope. It is then spun into regenerated silk fibers by direct extrusion in the air, offering a useful route to generate polymorphic and hierarchical regenerated silk fibers with physical properties beyond natural fiber construction. The materials maintain the structural hierarchy and mechanical properties of natural silks, including a modulus of 11 ± 4 GPa, even higher than natural spider silk. It can further be functionalized with a conductive silk/carbon nanotube coating, responsive to changes in humidity and temperature.Natural silk fibers are produced using a simple and green approach compared to alternative synthetic methods. Here, the authors show a bioinspired approach to spin regenerated silk fibers using anisotropic liquid crystals and dry spinning, resulting in remarkably robust fibers.