Shi-Yang Tang

Ion-Driven Photoluminescence Modulation of Quasi-Two-Dimensional MoS2 Nanoflakes for Applications in Biological Systems

Quasi-two-dimensional (quasi-2D) molybdenum disulfide (MoS2) is a photoluminescence (PL) material with unique properties. The recent demonstration of its PL, controlled by the intercalation of positive ions, can lead to many opportunities for employing this quasi-2D material in ion-related biological applications. Here, we present two representative models of biological systems that incorporate the ion-controlled PL of quasi-2D MoS2 nanoflakes. The ion exchange behaviors of these two models are investigated to reveal enzymatic activities and cell viabilities. While the ion intercalation of MoS2 in enzymatic activities is enabled via an external applied voltage, the intercalation of ions in cell viability investigations occurs in the presence of the intrinsic cell membrane potential.

Liquid Metal/Metal Oxide Frameworks with Incorporated Ga2O3 for Photocatalysis

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activity due to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt % incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

An Integrated Liquid Cooling System Based on Galinstan Liquid Metal Droplets

The continued miniaturization of electronic components demands integrated liquid cooling systems with minimized external connections and fabrication costs that can be implanted very close to localized hot spots. This might be challenging for existing liquid cooling systems because most of them rely on external pumps, connecting tubes, and microfabricated heat sinks. Here, we demonstrate an integrated liquid cooling system by utilizing a small droplet of liquid metal Galinstan, which is placed over the hot spot. Energizing the liquid metal droplet with a square wave signal creates a surface tension gradient across the droplet, which induces Marangoni flow over the surface of droplet. This produces a high flow rate of coolant medium through the cooling channel, enabling a soft pump. At the same time, the high thermal conductivity of liquid metal extends the heat transfer surface and facilitates the dissipation of heat, enabling a soft heat sink. This facilitates the rapid cooling of localized hot spots, as demonstrated in our experiments. Our technology facilitates customized liquid cooling systems with simple fabrication and assembling processes, with no moving parts that can achieve high flow rates with low power consumption.

Analysing calcium signalling of cells under high shear flows using discontinuous dielectrophoresis.

Immobilisation of cells is an important feature of many cellular assays, as it enables the physical/chemical stimulation of cells; whilst, monitoring cellular processes using microscopic techniques. Current approaches for immobilising cells, however, are hampered by time-consuming processes, the need for specific antibodies or coatings, and adverse effects on cell integrity. Here, we present a dielectrophoresis-based approach for the robust immobilisation of cells, and analysis of their responses under high shear flows. This approach is quick and label-free, and more importantly, minimises the adverse effects of electric field on the cell integrity, by activating the field for a short duration of 120u2009s, just long enough to immobilise the cells, after which cell culture media (such as HEPES) is flushed through the platform. In optimal conditions, at least 90% of the cells remained stably immobilised, when exposed to a shear stress of 63u2009dyn/cm2. This approach was used to examine the shear-induced calcium signalling of HEK-293 cells expressing a mechanosensitive ion channel, transient receptor potential vaniloid type 4 (TRPV4), when exposed to the full physiological range of shear stress.

Influence of semiconducting properties of nanoparticle coating on the electrochemical actuation of liquid metal marble

Semiconducting properties of nanoparticle coating on liquid metal marbles can present opportunities for an additional dimension of control on these soft objects with functional surfaces in aqueous environments. We show the unique differences in the electrochemical actuation mechanisms of liquid metal marbles with n- and p-type semiconducting nanomaterial coating. A systematic study on such liquid metal marbles shows voltage dependent nanoparticle cluster formation and morphological changes of the liquid metal core during electrochemical actuations and these observations are unique to p-type nanomaterial coated liquid metal marbles.

Modifying dielectrophoretic response of nonviable yeast cells by ionic surfactant treatment

Nonviable cells are essential biosystems, due to the functionalities they offer and their effects on viable cells. Therefore, the separation and immobilization of nonviable cells separately or in the vicinity of viable cells is of great importance for many fundamentals investigations in cell biology. However, most nonviable cells become less polarizable than the surrounding medium at conductivities above 0.01 S/m. This means that in such a medium, dielectrophoresis, despite its great versatilities for manipulation of cells, cannot be employed for immobilizing nonviable cells. Here, we present a novel approach to change the dielectrophoretic (DEP) response of nonviable yeast cells by treating them with low concentrations of ionic surfactants such as sodium dodecyl sulfate. After this treatment, they exhibit a strong positive DEP response, even at high medium conductivities. The capability of this treatment is demonstrated in two proof-of-concept experiments. First, we show the sorting and immobilization of viable and nonviable yeast cells, along consecutive microelectrode arrays. Second, we demonstrate the immobilization of viable and nonviable cells in the vicinity of each other along the same microelectrode array. The proposed technique allows DEP platforms to be utilized for the immobilization and subsequent postanalysis of both viable and nonviable cells with and without the presence of each other.

Controlled rotation and vibration of patterned cell clusters using dielectrophoresis.

The localized motion of cells within a cluster is an important feature of living organisms and has been found to play roles in cell signaling, communication, and migration, thus affecting processes such as proliferation, transcription, and organogenesis. Current approaches for inducing dynamic movement into cells, however, focus predominantly on mechanical stimulation of single cells, affect cell integrity, and, more importantly, need a complementary mechanism to pattern cells. In this article, we demonstrate a new strategy for the mechanical stimulation of large cell clusters, taking advantage of dielectrophoresis. This strategy is based on the cellular spin resonance mechanism, but it utilizes coating agents, such as bovine serum albumin, to create consistent rotation and vibration of individual cells. The treatment of cells with coating agents intensifies the torque induced on the cells while reducing the friction at the cell-cell and cell-substrate interfaces, resulting in the consistent motion of the cells. Such localized motion can be modulated by varying the frequency and voltage of the applied sinusoidal AC signal and can be achieved in the absence and presence of flow. This strategy enables the survival and functioning of moving cells within large-scale clusters to be investigated.

Microfluidic Mass Production of Stabilized and Stealthy Liquid Metal Nanoparticles

Functional nanoparticles comprised of liquid metals, such as eutectic gallium indium (EGaIn) and Galinstan, present exciting opportunities in the fields of flexible electronics, sensors, catalysts, and drug delivery systems. Methods used currently for producing liquid metal nanoparticles have significant disadvantages as they rely on both bulky and expensive high-power sonication probe systems, and also generally require the use of small molecules bearing thiol groups to stabilize the nanoparticles. Herein, an innovative microfluidics-enabled platform is described as an inexpensive, easily accessible method for the on-chip mass production of EGaIn nanoparticles with tunable size distributions in an aqueous medium. A novel nanoparticle-stabilization approach is reported using brushed polyethylene glycol chains with trithiocarbonate end-groups negating the requirements for thiol additives while imparting a stealth surface layer. Furthermore, a surface modification of the nanoparticles is demonstrated using galvanic replacement and conjugation with antibodies. It is envisioned that the demonstrated microfluidic technique can be used as an economic and versatile platform for the rapid production of liquid metal-based nanoparticles for a range of biomedical applications.

Hybrid Dielectric-loaded Nanoridge Plasmonic Waveguide for Low-Loss Light Transmission at the Subwavelength Scale

The emerging development of the hybrid plasmonic waveguide has recently received significant attention owing to its remarkable capability of enabling subwavelength field confinement and great transmission distance. Here we report a guiding approach that integrates hybrid plasmon polariton with dielectric-loaded plasmonic waveguiding. By introducing a deep-subwavelength dielectric ridge between a dielectric slab and a metallic substrate, a hybrid dielectric-loaded nanoridge plasmonic waveguide is formed. The waveguide features lower propagation loss than its conventional hybrid waveguiding counterpart, while maintaining strong optical confinement at telecommunication wavelengths. Through systematic structural parameter tuning, we realize an efficient balance between confinement and attenuation of the fundamental hybrid mode, and we demonstrate the tolerance of its properties despite fabrication imperfections. Furthermore, we show that the waveguide concept can be extended to other metal/dielectric composites as well, including metal-insulator-metal and insulator-metal-insulator configurations. Our hybrid dielectric-loaded nanoridge plasmonic platform may serve as a fundamental building block for various functional photonic components and be used in applications such as sensing, nanofocusing, and nanolasing.

A rapid, maskless 3D prototyping for fabrication of capillary circuits: Toward urinary protein detection

Proteinuria is an established risk marker for progressive renal function loss and patients would significantly benefit from a point‐of‐care testing. Although extensive work has been done to develop the microfluidic devices for the detection of urinary protein, they need the complicated operation and bulky peripherals. Here, we present a rapid, maskless 3D prototyping for fabrication of capillary fluidic circuits using laser engraving. The capillary circuits can be fabricated in a short amount of time (<10 min) without the requirements of clean‐room facilities and photomasks. The advanced capillary components (e.g., trigger valves, retention valves and retention bursting valves) were fabricated, enabling the sequential liquid delivery and sample‐reagent mixing. With the integration of smartphone‐based detection platform, the microfluidic device can quantify the urinary protein via a colorimetric analysis. By eliminating the bulky and expensive equipment, this smartphone‐based detection platform is portable for on‐site quantitative detection.