Shiba P. Adhikari

Titania Composites with 2 D Transition Metal Carbides as Photocatalysts for Hydrogen Production under Visible‐Light Irradiation

MXenes, a family of two-dimensional transition-metal carbides, were successfully demonstrated as co-catalysts with rutile TiO2 for visible-light-induced solar hydrogen production from water splitting. The physicochemical properties of Ti3 C2 Tx MXene coupled with TiO2 were investigated by a variety of characterization techniques. The effect of the Ti3 C2 Tx loading on the photocatalytic performance of the TiO2 /Ti3 C2 Tx composites was elucidated. With an optimized Ti3 C2 Tx content of 5 wt %, the TiO2 /Ti3 C2 Tx composite shows a 400 % enhancement in the photocatalytic hydrogen evolution reaction compared with that of pure rutile TiO2 . We also expanded our exploration to other MXenes (Nb2 CTx and Ti2 CTx ) as co-catalysts coupled with TiO2 , and these materials also exhibited enhanced hydrogen production. These results manifest the generality of MXenes as effective co-catalysts for solar hydrogen production.

Visible light assisted photocatalytic hydrogen generation by Ta2O5/Bi2O3, TaON/Bi2O3, and Ta3N5/Bi2O3 composites

Composites comprised of two semiconducting materials with suitable band gaps and band positions have been reported to be effective at enhancing photocatalytic activity in the visible light region of the electromagnetic spectrum. Here, we report the synthesis, complete structural and physical characterizations, and photocatalytic performance of a series of semiconducting oxide composites. UV light active tantalum oxide (Ta2O5) and visible light active tantalum oxynitride (TaON) and tantalum nitride (Ta3N5) were synthesized, and their composites with Bi2O3 were prepared in situ using benzyl alcohol as solvent. The composite prepared using equimolar amounts of Bi2O3 and Ta2O5 leads to the formation of the ternary oxide, bismuth tantalate (BiTaO4) upon calcination at 1000 °C. The composites and single phase bismuth tantalate formed were characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) surface area measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–Vis diffuse reflectance spectroscopy, and photoluminescence. The photocatalytic activities of the catalysts were evaluated for generation of hydrogen using aqueous methanol solution under visible light irradiation (λ ≥ 420 nm). The results show that as-prepared composite photocatalysts extend the light absorption range and restrict photogenerated charge-carrier recombination, resulting in enhanced photocatalytic activity compared to individual phases. The mechanism for the enhanced photocatalytic activity for the heterostructured composites is elucidated based on observed activity, band positions calculations, and photoluminescence data.

Visible-light-driven Bi2O3/WO3 composites with enhanced photocatalytic activity

Semiconductor heterojunctions (composites) have been shown to be effective photocatalytic materials to overcome the drawbacks of low photocatalytic efficiency that results from electron–hole recombination and narrow photo-response range. A novel visible-light-driven Bi2O3/WO3 composite photocatalyst was prepared by hydrothermal synthesis. The composite was characterized by scanning transmission electron microscopy (STEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area, Raman spectroscopy, photoluminescence spectroscopy (PL) and electrochemical impedance spectroscopy (EIS) to better understand the structures, compositions, morphologies and optical properties. Bi2O3/WO3 heterojunction was found to exhibit significantly higher photocatalytic activity towards the decomposition of Rhodamine B (RhB) and 4-nitroaniline (4-NA) under visible light irradiation compared to that of Bi2O3 and WO3. A tentative mechanism for the enhanced photocatalytic activity of the heterostructured composite is discussed based on observed activity, band position calculations, photoluminescence, and electrochemical impedance data. The present study provides a new strategy for the design of composite materials with enhanced visible light photocatalytic performance.

A Visible-Light-Active Heterojunction with Enhanced Photocatalytic Hydrogen Generation

A visible-light-active carbon nitride (CN)/strontium pyroniobate (SNO) heterojunction photocatalyst was fabricated by deposition of CN over hydrothermally synthesized SNO nanoplates by a simple thermal decomposition process. The microscopic study revealed that nanosheets of CN were anchored to the surface of SNO resulting in an intimate contact between the two semiconductors. Diffuse reflectance UV/Vis spectra show that the resulting CN/SNO heterojunction possesses intense absorption in the visible region. The structural and spectral properties endowed the CN/SNO heterojunction with remarkably enhanced photocatalytic activity. Specifically, the photocatalytic hydrogen evolution rate per mole of CN was found to be 11 times higher for the CN/SNO composite compared to pristine CN. The results clearly show that the composite photocatalyst not only extends the light absorption range of SNO but also restricts photogenerated charge-carrier recombination, resulting in significant enhancement in photocatalytic activity compared to pristine CN. The relative band positions of the composite allow the photogenerated electrons in the conduction band of CN to migrate to that of SNO. This kind of charge migration and separation leads to the reduction in the overall recombination rate of photogenerated charge carriers, which is regarded as one of the key factors for the enhanced activity. A plausible mechanism for the enhanced photocatalytic activity of the heterostructured composite is proposed based on observed activity, photoluminescence, time-resolved fluorescence emission decay, electrochemical impedance spectroscopy, and band position calculations.

Colloidal Cobalt Phosphide Nanocrystals as Trifunctional Electrocatalysts for Overall Water Splitting Powered by a Zinc–Air Battery

Highly efficient and stable electrocatalysts, particularly those that are capable of multifunctionality in the same electrolyte, are in high demand for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). In this work, highly monodisperse CoP and Co2 P nanocrystals (NCs) are synthesized using a robust solution-phase method. The highly exposed (211) crystal plane and abundant surface phosphide atoms make the CoP NCs efficient catalysts toward ORR and HER, while metal-rich Co2 P NCs show higher OER performance owing to easier formation of plentiful Co2 P@COOH heterojunctions. Density functional theory calculation results indicate that the desorption of OH* from cobalt sites is the rate-limiting step for both CoP and Co2 P in ORR and that the high content of phosphide can lower the reaction barrier. A water electrolyzer constructed with a CoP NC cathode and a Co2 P NC anode can achieve a current density of 10 mA cm-2 at 1.56 V, comparable even to the noble metal-based Pt/C and RuO2 /C pair. Furthermore, the CoP NCs are employed as an air cathode in a primary zinc-air battery, exhibiting a high power density of 62 mW cm-2 and good stability.

Interface Engineering of Colloidal CdSe Quantum Dot Thin Films as Acid-Stable Photocathodes for Solar-Driven Hydrogen Evolution

Colloidal semiconductor quantum dot (CQD)-based photocathodes for solar-driven hydrogen evolution have attracted significant attention because of their tunable size, nanostructured morphology, crystalline orientation, and band gap. Here, we report a thin film heterojunction photocathode composed of organic PEDOT:PSS as a hole transport layer, CdSe CQDs as a semiconductor light absorber, and conformal Pt layer deposited by atomic layer deposition (ALD) serving as both a passivation layer and cocatalyst for hydrogen evolution. In neutral aqueous solution, a PEDOT:PSS/CdSe/Pt heterogeneous photocathode with 200 cycles of ALD Pt produces a photocurrent density of -1.08 mA/cm2 (AM-1.5G, 100 mW/cm2) at a potential of 0 V versus reversible hydrogen electrode (RHE) ( j0) in neutral aqueous solution, which is nearly 12 times that of the pristine CdSe photocathode. This composite photocathode shows an onset potential for water reduction at +0.46 V versus RHE and long-term stability with negligible degradation. In the acidic electrolyte (pH = 1), where the hydrogen evolution reaction is more favorable but stability is limited because of photocorrosion, a thicker Pt film (300 cycles) is shown to greatly improve the device stability and a j0 of -2.14 mA/cm2 is obtained with only 8.3% activity degradation after 6 h, compared with 80% degradation under the same conditions when the less conformal electrodeposition method is used to deposit the Pt layer. Electrochemical impedance spectroscopy and time-resolved photoluminescence results indicate that these enhancements stem from a lower bulk charge recombination rate, higher interfacial charge-transfer rate, and faster reaction kinetics. We believe that these interface engineering strategies can be extended to other colloidal semiconductors to construct more efficient and stable heterogeneous photoelectrodes for solar fuel production.