Shiguang Miao

The International Urban Energy Balance Models Comparison Project: First Results from Phase 1

A large number of urban surface energy balance models now exist with different assumptions about the important features of the surface and exchange processes that need to be incorporated. To date, no comparison of these models has been conducted; in contrast, models for natural surfaces have been compared extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the methods and first results from an extensive international comparison of 33 models are presented. The aim of the comparison overall is to understand the complexity required to model energy and water exchanges in urban areas. The degree of complexity included in the models is outlined and impacts on model performance are discussed. During the comparison there have been significant developments in the models with resulting improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling approaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the degree of model complexity required for accurate simulations. There is evidence that some classes of models perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler models perform as well as the more complex models based on all statistical measures. Generally the schemes have best overall capability to model net all-wave radiation and least capability to model latent heat flux.

An Observational and Modeling Study of Characteristics of Urban Heat Island and Boundary Layer Structures in Beijing

Abstract In this paper, the characteristics of urban heat island (UHI) and boundary layer structures in the Beijing area, China, are analyzed using conventional and Moderate Resolution Imaging Spectroradiometer (MODIS) observations. The Weather Research and Forecasting (WRF) model coupled with a single-layer urban canopy model (UCM) is used to simulate these urban weather features for comparison with observations. WRF is also used to test the sensitivity of model simulations to different urban land use scenarios and urban building structures to investigate the impacts of urbanization on surface weather and boundary layer structures. Results show that the coupled WRF/Noah/UCM modeling system seems to be able to reproduce the following observed features reasonably well: 1) the diurnal variation of UHI intensity; 2) the spatial distribution of UHI in Beijing; 3) the diurnal variation of wind speed and direction, and interactions between mountain–valley circulations and UHI; 4) small-scale boundary layer conv...

Impacts of Urban Processes and Urbanization on Summer Precipitation: A Case Study of Heavy Rainfall in Beijing on 1 August 2006

AbstractFinescale simulations (with 500-m grid spacing) using the Weather Research and Forecasting Model (WRF) were used to investigate impacts of urban processes and urbanization on a localized, summer, heavy rainfall in Beijing. Evaluation using radar and gauge data shows that this configuration of WRF with three-dimensional variational data assimilation of local weather and GPS precipitable water data can simulate this event generally well. Additional WRF simulations were conducted to test the sensitivity of simulation of this storm to different urban processes and urban land-use scenarios. The results confirm that the city does play an important role in determining storm movement and rainfall amount. Comparison of cases with and without the presence of the city of Beijing with respect to the approaching storm shows that the urban effect seems to lead to the breaking of the squall line into convective cells over the urban area. The change of precipitation amount depends on the degree of urbanization (i...

Analysis of observations on the urban surface energy balance in Beijing

The 1-year (2009–2010) measurements are analyzed of the urban surface energy balance (SEB) obtained from the sensors located at three vertical layers of a 325-m tower in downtown Beijing. Results show that: (1) The measurements from the 325-m tower represent the SEB characteristics of the cities located in semi-humid warm-temperate continental monsoon climate zone. In a typical hot and rainy summer, cold and dry winter, the measured Bowen ratio is minimum in summer and maximum in winter. The Bowen ratio measured at 140 m for spring, summer, autumn, and winter are 2.86, 0.82, 1.17, and 4.16 respectively. (2) At the height of 140-m (in the constant flux layer), the noontime albedo is ∼0.10 for summer, ∼0.12 for spring and autumn, and ∼0.14 for winter. The ratios of daytime sensible heat flux, latent heat flux, and storage heat flux to net radiation are 0.25, 0.16, and 0.59 for clear-sky days, and 0.33, 0.19, and 0.48 for cloudy days respectively. (3) Under clear-sky days, the nighttime sensible heat flux is almost zero, but the latent heat flux is greater than zero. For cloudy days, the nighttime sensible heat flux is slightly greater than the latent heat flux in winter. The nighttime upward heat flux is presumably due to the anthropogenic release (mainly latent heat for summer, while latent and sensible heat for winter).

Enhancing Hydrologic Modelling in the Coupled Weather Research and Forecasting-Urban Modelling System

Urbanization modifies surface energy and water budgets, and has significant impacts on local and regional hydroclimate. In recent decades, a number of urban canopy models have been developed and implemented into the Weather Research and Forecasting (WRF) model to capture urban land-surface processes. Most of these models are inadequate due to the lack of realistic representation of urban hydrological processes. Here, we implement physically-based parametrizations of urban hydrological processes into the single layer urban canopy model in the WRF model. The new single-layer urban canopy model features the integration of, (1) anthropogenic latent heat, (2) urban irrigation, (3) evaporation from paved surfaces, and (4) the urban oasis effect. The new WRF–urban modelling system is evaluated against field measurements for four different cities; results show that the model performance is substantially improved as compared to the current schemes, especially for latent heat flux. In particular, to evaluate the performance of green roofs as an urban heat island mitigation strategy, we integrate in the urban canopy model a multilayer green roof system, enabled by the physical urban hydrological schemes. Simulations show that green roofs are capable of reducing surface temperature and sensible heat flux as well as enhancing building energy efficiency.

Observed Spatial Characteristics of Beijing Urban Climate Impacts on Summer Thunderstorms

AbstractThis study investigates interactive effects from the Beijing urban area on temperature, humidity, wind speed and direction, and precipitation by use of hourly automatic weather station data from June to August 2008–12. Results show the Beijing summer urban heat island (UHI) as a multicenter distribution (corresponding to underlying land-use features), with stronger nighttime than daytime values (averages of 1.7° vs 0.8°C, respectively). Specific humidity was lower in urban Beijing than in surrounding nonurban areas, and this urban dry island is stronger during day than night (maximum of −2.4 vs −1.9 g kg−1). Wind direction is affected by both a mountain–valley-breeze circulation and by urbanization. Morning low-level flows converged into the strong UHI, but afternoon and evening southerly winds were bifurcated by an urban building-barrier-induced divergence. Summer thunderstorms also thus bifurcated and bypassed the urban center because of the building-barrier effect during both daytime and nightt...

Research priorities in observing and modeling urban weather and climate

In 2007, the world reached the unprecedented milestone of half of its people living in cities, and that proportion is projected to be 60% in 2030. The combined effect of global climate change and rapid urban growth, accompanied by economic and industrial development, will likely make city residents more vulnerable to a number of urban environmental problems, including extreme weather and climate conditions, sea-level rise, poor public health and air quality, atmospheric transport of accidental or intentional releases of toxic material, and limited water resources. One fundamental aspect of predicting the future risks and defining mitigation strategies is to understand the weather and regional climate affected by cities. For this reason, dozens of researchers from many disciplines and nations attended the Urban Weather and Climate Workshop.1 Twenty-five students from Chinese universities and institutes also took part. The presentations by the workshops participants span a wide range of topics, from the interaction between the urban climate and energy consumption in climate-change environments to the impact of urban areas on storms and local circulations, and from the impact of urbanization on the hydrological cycle to air quality and weather prediction.

Urban Surface Energy Balance Models: Model Characteristics and Methodology for a Comparison Study

Many urban surface energy balance models now exist. These vary in complexity from simple schemes that represent the city as a concrete slab, to those which incorporate detailed representations of momentum and energy fluxes distributed within the atmospheric boundary layer. While many of these schemes have been evaluated against observations, with some models even compared with the same data sets, such evaluations have not been undertaken in a controlled manner to enable direct comparison. For other types of climate model, for instance the Project for Intercomparison of Land-Surface Parameterization Schemes (PILPS) experiments (Henderson-Sellers et al., 1993), such controlled comparisons have been shown to provide important insights into both the mechanics of the models and the physics of the real world. This paper describes the progress that has been made to date on a systematic and controlled comparison of urban surface schemes. The models to be considered, and their key attributes, are described, along with the methodology to be used for the evaluation.

Enhanced modeling of latent heat flux from urban surfaces in the Noah/single-layer urban canopy coupled model

The numerical modeling of the impacts of urban buildings in mesoscale meteorological models has gradually improved in recent years. Correctly representing the latent heat flux from urban surfaces is a key issue in urban land-atmosphere coupling studies but is a common weakness in current urban canopy models. Using the surface energy balance data at a height of 140 m from a 325 m meteorological tower in Beijing, we conducted a 1-year continuous off-line simulation by using a coupled land surface model and a single-layer urban canopy model and found that this model has a relatively large systematic error for simulated latent heat flux. To improve the numerical method for modeling latent heat flux from urban surfaces, we combined observational analysis and urban land surface model to derive an oasis effect coefficient for urban green areas; to develop a temporal variation formula for water availability in urban impervious surfaces; and to specify a diurnal profile and the maximum values of anthropogenic latent heat release for four seasons. These results are directly incorporated into the urban land surface model to improve model performance. In addition, this method serves as a reference for studies in other urban areas.

Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance