Shijie You

Improving phosphate buffer-free cathode performance of microbial fuel cell based on biological nitrification

To reduce the amount of phosphate buffer currently used in Microbial Fuel Cells (MFCs), we investigated the role of biological nitrification at the cathode in the absence of phosphate buffer. The addition of a nitrifying mixed consortia (NMC) to the cathode compartment and increasing ammonium concentration in the catholyte resulted in an increase of cell voltage from 0.3 V to 0.567 V (external resistance of 100 Omega) and a decrease of catholyte pH from 8.8 to 7.05. A large fraction of ammonium was oxidized to nitrite, as indicated by an increase of nitrate-nitrogen (NO(3)(-)-N). An MFC inoculated with an NMC and supplied with 94.2 mgN/l ammonium to the catholyte could generate a maximum power of 2.1+/-0.14 mW (10.94+/-0.73 W/m(3)). This compared favorably to an MFC supplied with either buffered or non-buffered solution. The buffer-free NMC inoculated cathodic chamber showed the smallest polarization resistance, suggesting that nitrification resulted in improved cathode performance. The improved performances of the phosphate buffer-free cathode and cell are positively related to biological nitrification, in which we suggest additional protons produced from ammonium oxidation facilitated electrochemical reduction of oxygen at cathode.

PB/PANI-modified electrode used as a novel oxygen reduction cathode in microbial fuel cell

This study focuses on the preparation of a new type of Prussian Blue/polyaniline (PB/PANI)-modified electrode as oxygen reduction cathode, and its availability in microbial fuel cell (MFC) for biological power generation. The PB/PANI-modified electrode was prepared by electrochemical and chemical methods, both of which exhibited good electrocatalytical reactivity for oxygen reduction in acidic electrolyte. The MFC with PB/PANI-modified cathode aerated by either oxygen or air was shown to yield a maximum power density being the same with that of the MFC with liquid-state ferricyanide cathode, and have an excellent duration as indicated by stable cathode potential for more than eight operating circles. This study suggests a promising potential to utilize this novel electrode as an effective alternative to platinum for oxygen reduction in MFC system without losing sustainability.

A novel stainless steel mesh/cobalt oxide hybrid electrode for efficient catalysis of oxygen reduction in a microbial fuel cell.

To explore efficient and cost-effective cathode material for microbial fuel cells (MFCs), the present study fabricates a new type of binder-free gas diffusion electrode made of cobalt oxide (Co3O4) micro-particles directly grown on stainless steel mesh (SSM) by using an ammonia-evaporation-induced method. In various electrochemical analyses and evaluations in batch-fed dual-chamber MFCs, the SSM/Co3O4 hybrid electrode demonstrates improved performances in terms of electrocatalytic activity, selectivity, durability and economics toward oxygen reduction reaction (ORR) in pH-neutral solution, in comparison with conventional carbon supported platinum catalyst. This study suggests a new strategy to fabricate a more effective electrode for ORR in MFCs, making it more technically and economically viable to produce electrical energy from organic materials for practical applications.

Bioaugmentation of a biological contact oxidation ditch with indigenous nitrifying bacteria for in situ remediation of nitrogen-rich stream water

In this study, specialized bacteria were domesticated and cultivated with polluted stream water. The bioaugmentation of specialized bacteria would significantly enhance the removal efficiency of TN and NH4+-N from 25.9% to 50.3%, and from 34.5% to 60.1%, respectively. Concomitant increases in the number of microbial communities and the proportion of nitrifying bacteria were also identified by the most probable number (MPN) method. PCR-DGGE profiles revealed that the bacterial community could be successfully enriched and the ammonia-oxidizing bacteria communities were shown predominant by the species of Nitrosomonas. The biological contact oxidation ditch (BCOD) system augmented with specialized bacteria can be a viable alternative for treating polluted stream water to achieve improved nitrogen removal.

Forward osmosis with a novel thin-film inorganic membrane.

Forward osmosis (FO) represents a new promising membrane technology for liquid separation driven by the osmotic pressure of aqueous solution. Organic polymeric FO membranes are subject to severe internal concentration polarization due to asymmetric membrane structure, and low stability due to inherent chemical composition. To address these limitations, this study focuses on the development of a new kind of thin-film inorganic (TFI) membrane made of microporous silica xerogels immobilized onto a stainless steel mesh (SSM) substrate. The FO performances of the TFI membrane were evaluated upon a lab-scale cell-type FO reactor using deionized water as feed solution and sodium chloride (NaCl) as draw solution. The results demonstrated that the TFI membrane could achieve transmembrane water flux of 60.3 L m(-2) h(-1) driven by 2.0 mol L(-1) NaCl draw solution at ambient temperature. Meanwhile, its specific solute flux, i.e. the solute flux normalized by the water flux (0.19 g L(-1)), was 58.7% lower than that obained for a commercial cellulose triacetate (CTA) membrane (0.46 g L(-1)). The quasi-symmetry thin-film microporous structure of the silica membrane is responsible for low-level internal concentration polarization, and thus enhanced water flux during FO process. Moreover, the TFI membrne demonstrated a substantially improved stability in terms of mechanical strength, and resistance to thermal and chemical stimulation. This study not only provides a new method for fabricating quasi-symmetry thin-film inorganic silica membrane, but also suggests an effective strategy using this alternative membrane to achieve improved FO performances for scale-up applications.

In Situ Photochemical Activation of Sulfate for Enhanced Degradation of Organic Pollutants in Water

The advanced oxidation process (AOP) based on SO4•- radicals has been receiving growing attention in water and wastewater treatment. Producing SO4•- radicals by activation of peroxymonosulfate or persulfate faces the challenges of high operational cost and potential secondary pollution. In this study, we report the in situ photochemical activation of sulfate (i-PCAS) to produce SO4•- radicals with bismuth phosphate (BPO) serving as photocatalyst. The prepared BPO rod-like material could achieve remarkably enhanced degradation of 2,4-dichlorophenol (2,4-DCP) in the presence of sulfate, indicated by the first-order kinetic constant (k = 0.0402 min-1) being approximately 2.1 times that in the absence (k = 0.019 min-1) at pH-neutral condition. This presented a marked contrast with commercial TiO2 (P25), the performance of which was always inhibited by sulfate. The impact of radical scavenger and electrolyte, combined with electron spin resonance (ESR) measurement, verified the formation of •OH and SO4•- radicals during i-PCAS process. According to theoretical calculations, BPO has a sufficiently high valence band potential making it thermodynamically favorable for sulfate oxidation, and weaker interaction with SO4•- radicals resulting in higher reactivity toward target organic pollutant. The concept of i-PCAS appears to be attractive for creating new photochemical systems where in situ production of SO4•- radicals can be realized by using sulfate originally existing in aqueous environment. This eliminates the need for extrinsic chemicals and pH adjustment, which makes water treatment much easier, more economical, and more sustainable.

Improved interfacial oxygen reduction by ethylenediamine tetraacetic acid in the cathode of microbial fuel cell

In this study, ethylenediamine tetraacetic acid (EDTA) was investigated as a new kind of non-polymeric catalyst binder to improve interfacial oxygen reduction reaction (ORR) for the cathode of microbial fuel cell (MFC). The electrochemical analysis and MFC tests show negative correlation between ORR activity and molar concentration of EDTA applied during electrode preparation. In particular, the 0.02mol/L-EDTA yields higher ORR activity than other binder materials like Nafion, water, 0.1mol/L-EDTA and 0.2mol/L-EDTA, as indicated by the strongest response of ORR current and the smallest charge-transfer resistance. Accordingly, the MFC with cathode of 0.02mol/L-EDTA produced a maximum power density of 722mW/m(2), accounting for a value approximately 42% higher than that of commercial Nafion binder (5wt%, 507mW/m(2)). The improved ORR activity should be attributed to the enhanced proton transfer from phosphate ions to EDTA-involved three-phase boundary as a result of dipole ion bonds on nitrogen atoms having unshared pair of electrons in EDTA molecule.

Macroporous monolithic Magnéli-phase titanium suboxides as anode material for effective bioelectricity generation in microbial fuel cells

A macroporous monolithic ceramic anode material based on Magneli-phase titanium suboxides, fabricated by a facile method, is able to effectively generate bioelectricity in microbial fuel cells (MFCs). Owing to their highly active surface area and efficient extracellular electron transfer from electricigens to the anode, MFCs can achieve a peak biocurrent time of 37 h with a maximum power density of 1541 ± 18 mW m−2.

Natural eggshell membrane as separator for improved coulombic efficiency in air-cathode microbial fuel cells

Natural eggshell membrane (ESM) is proposed as a separator to enhance electricity recovery in air-cathode microbial fuel cells (MFCs). The unique fibrous structure and surface chemistry of ESM can mitigate substrate and oxygen crossover, and biofouling of the cathode, achieving a remarkable coulombic efficiency of 67.14–95.03%, depending on the current density. This study demonstrates an effective, simple and green route for recovering electricity from organic matter in MFCs.

A case study of aggregation behaviors of titanium dioxide nanoparticles in the presence of dodecylbenzene sulfonate in natural water

The present work aims to ascertain the mechanisms of surfactant (dodecylbenzene sulfonate; DBS) effects on the aggregation behaviors of TiO2 nanoparticles (TiO2-NPs) in natural water samples. Aggregation experiments were conducted at a TiO2-NPs concentration of 10mg/L in deionized water and in natural water samples via dynamic light scattering and Zeta potential determination. Average attachment efficiency was calculated to compare the aggregation behaviors of nanoparticles in the two aqueous media. Results showed that the effects of DBS on aggregation could be interpreted by both Derjaguin-Landau-Verwey-Overbeek (DLVO) and non-DLVO mechanisms. In natural water samples, aggregation did not occur rapidly and was able to develop slowly under all conditions, and the roles of DBS were obvious at high DBS concentration owing to the impacts of inherent components of natural water samples, such as colloids and natural organic compounds. Future aggregation studies should concentrate on multi-factor, multi-colloidal and dynamic aspects under similar environmental conditions.