Shinzo Tsuboi

Analysis of track-edge noise in thin-film recording media

Track-edge noise has been analyzed to clarify track-edge noise mechanisms. Edge noise arises from two different regions: the bit edge where the magnetization direction is opposite to the previously dc-erased direction and the magnetic transition edge. The edge noise at low density is mainly due to the magnetic distribution at the bit edge. The transition edge noise increases with increasing recording density, and it becomes dominant at high-recording density for an oriented medium. On the other hand, the transition edge noise is almost constant with increasing recording density for an isotropic medium.

Offtrack characteristics on media noise for Co-Cr-Ta films

The effect of remanent magnetic flux density (B/sub r/) and magnetic layer thickness (/spl delta/) on offtrack noise characteristics in Co-Cr-Ta alloy thin films is investigated. It has been found that decreasing the value of B/sub r/ is a more effective method of improving offtrack noise characteristics than decreasing the value of /spl delta/. Offtrack noise is shown to be due to the fluctuations in the amplitude of readback waveforms, fluctuations which are caused by fluctuations in magnetic transition amplitude. It was observed, using a magnetic force microscope, that lower B/sub r/ media had sharp boundaries at the track edge regions and the magnetization was more uniform, compared with those of higher B/sub r/ media.

Read/write characteristics of focused-ion-beam-etched heads for perpendicular magnetic recording media

The read/write characteristics for perpendicular magnetic recording media of focused-ion-beam (FIB)-etched recording heads were investigated. It was found that the trailing edge of an FIB-etched head produces a higher gradient in the magnetic field perpendicular to the medium than a head which has not been etched. The signal-to-noise ratio of the medium increased with the FIB-etched write gap. A high-Bs and thin pole increased the magnetic fields gradient in the perpendicular direction, resulting in excellent read/write characteristics.